$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

고에너지 열가소성 추진제 제조 및 특성연구(II)
Study on the Formulation of an Energetic Thermoplastic Propellant and its Properties(II) 원문보기

한국추진공학회지 = Journal of the Korean Society of Propulsion Engineers, v.24 no.3, 2020년, pp.41 - 46  

김한철 (Propulsion Center, Daejeon Plant, Hanwha Corporation) ,  박의용 (Propulsion Center, Daejeon Plant, Hanwha Corporation) ,  정재윤 (Propulsion Center, Daejeon Plant, Hanwha Corporation) ,  김윤곤 (Propulsion Center, Daejeon Plant, Hanwha Corporation) ,  최성한 (Propulsion Center, Daejeon Plant, Hanwha Corporation) ,  강태운 (Energetic Materials & Pyrotechnics, hanwha Corporation R&D Center) ,  오경원 (Maneuver&Firepower Technical Team, Defense Industry Technology Center)

초록
AI-Helper 아이콘AI-Helper

본 연구에서는 당 논문과 동일한 제목 하에 이루어진 연구결과에 이어서 최신 개발 고에너지 열가소성(ETPE)추진제의 시차 주사 열량(DSC) 및 열중량 분석(TGA)법으로 열분석을 진행하여 고에너지 열가소성 추진제의 특징을 확인하였으며, 추진제 둔감성을 확인하기 위해 추진제 둔감 정도 확인 시험인 LSGT, 파쇄성 시험을 진행하였다. 추진제 원료로는 GAP(Glycidyl Azide Polymer)이 45% 함유된 고에너지 열가소성(ETPE) 바인더와 고에너지 가소제(DEGDN), 산화제로는 AP(Ammonium Perchlorate)와 RDX(research development explosive, cyclotrimethylenetrinitramine)를 사용하였다. 위와 같은 분석을 통해, 개발된 ETPE 추진제가 일반적인 RDX/AP 추진제와 유사한 열적 거동을 갖는 것을 확인 하였다.

Abstract AI-Helper 아이콘AI-Helper

In this study, measurement and analysis results from Differential scanning calorimetry(DSC) and Thermogravimetric analysis(TGA) on the newly developed high-energy thermoplastic elastomer(ETPE) propellant are described, followed by the previous study done under the same title as this paper [1]. The c...

주제어

참고문헌 (16)

  1. Jeong, J.Y., Song, J.K., Kim, Y.G. and Lee, B.G., "Study on the Formulation of an Energetic Thermoplastic Propellant and its Properties(I)," Journal of the Korean Society of Propulsion Engineers, Vol. 23, No. 1, pp. 71-78, 2019. 

  2. Zhang, Z., Wang, G. Luo, N., Huang, M. Jin, M. and Luo, Y., "Thermal Decomposition of Energetic Thermoplastic Elastomers of Poly(Glycidyl Nitrate)," Appl. Polym., Vol. 131, Issue 21, pp. 40965, 2014. 

  3. Kwon, O.S., Ji, D.J. and Choi, S.H., "Foreign State and Domestic Development of Solid Rocket Motor Demilitarization," 30th KSPE Spring Conference, Incheon, pp. 31-35, May 2008. 

  4. Kim, H.C., "Synthetic Study of Various GAP-Copolymers for Energetic Thermoplastic Elastomer," Master's Degree, Department of Bionanotechnology, Graduate School of Hanyang University, South Korea, 2018. 

  5. Lee, Y.G., Cho, J.H., Lee, H.J. and Lee, D.Y., "Sensitivity Characteristics of Thermoplastic Solid Propellant Using High Energy Binder and RDX/AP," 30th KSPE Spring Conference, JeJu, pp. 853-857, 2015. 

  6. Min, H.S., Cho, J.H., Lee, Y.H., Lee, D.Y. and Lee, H.J., "Mechanical Properties of Thermoplastic Solid Propellant Using Energetic Binder and RDX," 30th KSPE Spring Conference, JeJu, pp. 861-864, 2015. 

  7. Cho, J.H., Lee, Y.G., Lee, D.Y., and Lee, H.J., "A Study on Burning Rate of the Thermoplastic Solid Propellants for Variant Binder," 30th KSPE Spring Conference, JeJu, pp. 865-868, 2015. 

  8. Kim, C.K., Yoo, J.C. and Min, B.S., "Impact Sensitivity of HTPB & HTPB Propellants Using Friability Test," Journal of the Korean Society of Propulsion Engineers, Vol. 15, No. 1, pp. 29-34, 2011. 

  9. Yoo, J.C., Kim, J.H., Kim, C.K. and Seo, T.S., "Thermal Characterization for HTPB IM Propellants," 33th KSPE Spring Conference, Gyeongju, pp. 177-180, 2009. 

  10. Lee, W.J., Kim, Y.H., Lee, K.B., Koo, K.K. and Lim, H.Y., "Energetic Material Reduced Sensitivity RDX," 48th KSPE Spring Conference, Jeju, pp. 482-488, 2017. 

  11. Keenan, A. and Siegmung, R., "The Thermal Decomposition of Ammonium Perchlorate: A Literature Review," AD 673 542, 1 August, 1968. 

  12. Bircumshaw, L.L. and Newman, B.H., "The Thermal Decomposition of Ammonium Perchlorate I. Introduction, Experimental, Analysis of Gaseous Products, and Thermal Decomposition Experiments," Proceedings the Royal of Society, Vol. 227, pp. 115-132, 1954. 

  13. Mathew, S., Krishnan, K. and Ninan, K.N., "A DSC Study on the Effect of RDX and HMX on the Thermal Decomposition of Phase Stabilized Ammonium Nitrate," Propellants, Explosives, Pyrotechnics, Vol. 23, pp. 150-154, 1998. 

  14. Jiao, Q.J., Zhu, Y.L., Xing, J.C., Ren, H. and Huang, H., "Thermal Decomposition of RDX/AP by TG-DSC-MS-FTIR," Journal of Thermal Analysis and Calorimetry, Vol. 116, pp. 1125-1131, 2014. 

  15. Mallick, L., Kumar, S. and Chowdhury, A., "Thermal Decomposition of Ammonium Perchlorate - A TGA-FTIR-MS Study : Part I," Vol. 610, pp. 57-68, 2015. 

  16. Boldyrev, V.V., "Thermal Decomposition of Ammonium Perchlorate," Thermochimica Acta, Vol. 443, No. 1, pp. 1-36, 2006. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로