최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of Korean Tunnelling and Underground Space Association = 한국터널지하공간학회논문집, v.22 no.4, 2020년, pp.419 - 434
김진섭 (한국원자력연구원 방사성폐기물처분연구부) , 홍창호 (한국원자력연구원 방사성폐기물처분연구부) , 김건영 (한국원자력연구원 방사성폐기물처분연구부)
In this study, the damage parameters of Mazars model for KURT (KAERI Underground Research Tunnel) granite are measured form uniaxial compressive and Brazilian tests under the simulated coupled condition of a deep geological disposal. The tests are conducted in three different temperatures (15℃...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
인장강도를 측정하는 방법은 무엇이 있는가? | 인장강도를 측정하는 방법은 크게 직접 인장시험과 간접인장시험이 있다. 직접 인장시험은 암석이나 콘크리 트를 잡고 양단으로 인장력을 가하는 것으로 가장 정확한 인장강도 측정방법이나 암석이나 콘크리트를 고정하여 당겨야 하기 때문에 미끄럼이 발생하지 않도록 충분한 강도로 시편을 고정할 수 있어야 한다. | |
심지층처분장의 영향은 무엇인가? | 심지층처분장은 사용후핵연료의 붕괴열로 인한 고온, 500 m 이상의 심도로 인한 고압, 지하수로 인한 포화 등의 조건을 가지며 이러한 열-수리-역학(Thermal-Hydro-Mechanical, T-H-M) 조건은 처분구조물(근계 암반, 벤토나이트 및 뒷채움재, 캐니스터 등)의 장기거동에 영향을 미친다(Kim et al., 2011; 2012; 2019a). | |
Mazars 손상모델의 인자를 도출하는 과정에서 다른 모델상수를 도출을 방지하기 위해 고려할 사항은 무엇인가? | 동일한 실험일 지라도 Mazars 손상모델의 인자를 도출하는 과정에서 연구자에 따라 다른 모델상수를 도출할 가능성이 있다. 즉 동일한 응력-변형률 곡선에서 Mazars 손상모델 파라미터를 산정할 때 다양한 A와 B의 조합이 도출될 수 있기 때문에 A와 B를 적합하게 결정해야 한다. 예를 들어 HM-3 시료에 대한 일축압축 응력-변형률 곡선에서 압축손상 발생 변형률(damage threshold)은 82 µ∈이다. Fig. 9는 Ac= 19.43,Bc= 1,922일 때의 곡선을 나타내며 Fig. 10은 Ac= 14,Bc= 1,790일 때의 곡선을 나타낸다. 또한 손상발생변형률(∈do)이 커지면 동일한 B의값에서 A의 값은 작아진다. 따라서 Ac의 값을 먼저 결정하고 그에 상응하는 Bc의 값을 산정하는 것이 올바른 A와 B의 값을 산정하는 방법이라고 판단된다. 두 번째, 일반적으로 Mazars 모델은 응력 피크점과 그 직후에서의 거동을 모사하기에 적합한 것으로 알려져 있기 때문에(Jirasek, 2011) 소성변형(plastic deformation)으로 인해 생긴영구 변형구간은 제거하고 Mazars 모델의 파라미터를 도출해야 한다. |
De Falco, A., Mori, M., Sevieri, G. (2018), "Mazars' damage model for masonry structures: a case study of a church in Italy", Proceedings of the COMSOL Conference 2018, Lausanne, pp. 1-7.
Gassmann, F. (1951), "Elastic waves through a packing of spheres", Geophysics, Vol. 16, No. 4, pp. 673-682.
Gerard, B., Piajaudier-Cabot, G., Laborderie, C. (1998), "Coupled diffusion-damage modelling and the implications on failure due to strain localization", International Journal of Solids and Structures, Vol. 35, No. 31-32, pp. 4107-4120.
Hamon, F. (2013), Model of damage of Mazars, Code_Aster, R7.01.08., pp. 1-16.
IAEA (2003), The long term storage of radioactive waste: Safety and sustainability, A Position Paper of International Experts, IAEA-LTS/RW, IAEA, Vienna.
Idiart, A., Lavina, M., Coene, E. (2019), Modelling of concrete degradation-Hydro-chemo-mechanical processes, SKB Report R-19-12, pp. 41.
Jianhong, Y., Wu, F.Q., Sun, J.Z. (2009), "Estimation of the tensile elastic modulus using Brazilian disc by applying diametrically opposed concentrated loads", International Journal of Rock Mechanics and Mining Sciences, Vol. 46, No. 3, pp. 568-576.
Jirasek, M. (2011), "Damage and smeared crack models", Numerical Modeling of Concrete Cracking, Springer, pp. 1-49.
Kachanov, L.M. (1958), "Time of rupture process under creep conditions", Izvestiya Akademii Nauk SSSR Otdelenie Tekniches, No. 8, pp. 26-31.
Kim, J.S. Cho, W.J., Park, S., Kim, G.Y., Baik, M.H. (2019a), "A review on the design requirement of temperature in high-level nuclear waste disposal system: based on bentonite buffer", Journal of Korean Tunnelling and Underground Space Association, Vol. 21, No. 5, pp. 587-609.
Kim, J.S., Cho, W.J., Kim, G.Y. (2019b), "Hydrothermal analysis of a double-layered bentonite in two-layered repository using TOUGH2 code: High performance buffer", Proceedings of the KRS 2019 Fall Conference, Vol. 17, No. 2, Jeju, pp. 265-266.
Kim, J.S., Cho, W.J., Lee, K.S., Choi, H.J., Cho, G.C. (2012), "Numerical simulation for variations of water saturation in bentonite buffer under the effect of a rock joint using the TOUGHT2 code", Journal of Korean Tunnelling and Underground Space Association, Vol. 14, No. 6, pp. 575-593.
Kim, J.S., Kwon, S.K., Sanchez, M., Cho, G.C. (2011), "Geological storage of high level nuclear waste", KSCE Journal of Civil Engineering, Vol. 15, No. 4, pp. 721-737.
Lee, J., Kim, I.Y., Bae, D.S., Lee, M., Lee, Y.M, and Choi, H.J. (2016), A safety case of the conceptual disposal system for pyro-processing high level waste based on the KURT site (AKRS-16): I. Design base & disposal facility, Korea Atomic Energy Research Institute Report, KAERI/TR-6727/2016.
Mazars, J. (1986), "A description of micro- and macroscale damage of concrete structures", Engineering Fracture Mechanics, Vol. 25, No. 5-6, pp. 729-737.
Mazars, J., Grange, S. (2017), "Simplified strategies based on damage mechanics for concrete under dynamic loading, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 375, No. 2085, pp. 20160170.
Mazars, J., Hamon, F., Grange, S. (2015), "A new 3D damage model for concrete under monotonic, cyclic and dynamic loadings", Materials and Structures, Vol. 48, pp. 3779-3793.
McKinnon, M.A., Cunningham, M.E. (2003), Dry storage demonstration for high-burnup spent nuclear fuel-feasibility study, Pacific Northwest National Laboratory Report, PNNL-14390.
McKinnon, M.A., DeLoach, V.A. (1993), Spent nuclear fuel storage - Performance tests and demonstrations, Pacific Northwest Laboratory Report, PNL-8451.
Park, S.H., Kim, J.S., Kim, G.Y., Kwon, S. (2019), "Evaluation of mechanical properties of KURT granite under simulated coupled condition of a geological repository", Journal of Korean Tunnelling and Underground Space Association, Vol. 21, No. 4, pp. 501-518.
Pituba, J.J.C., Lacerda, M.M.S. (2012), "Simplified damage models applied in the numerical analysis of reinforced concrete structures", IBRACON Structures and Materials Journal, Vol. 5, No. 1, pp. 26-37.
Saouridis, C. (1988), Objective identification and numerical simulation of softening: multiple scale approach to the damage process of concrete, Ph.D. Thesis, Paris-6 University, LMT Cachan (in French).
Souissi, S., Miled, K, Hamdi, E., Sellami, H. (2017), "Numerical modeling of rock damage during indentation process with reference to hard rock drilling", International Journal of Geomechanics, Vol. 17, No. 7, pp. 04017002.
Xu, S., White, R.E. (1995), "A new velocity model for clay-sand mixtures", Geophysical Prospecting, Vol. 43, No. 1, pp. 91-118.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.