최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국융합학회논문지 = Journal of the Korea Convergence Society, v.11 no.8, 2020년, pp.153 - 158
최계광 (공주대학교 금형설계공학과) , 조재웅 (공주대학교 기계자동차공학부)
In this study, the thermal and stress analyses were performed by applying a temperature condition of 100℃ at CPU cooler model. The value of heat flux value is shown to be the most at the lower rod area. The upper part becomes, the smaller the heat flow rate. The highest temperature is shown a...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
열 유입은 어떻게 정의되었는가? | 5는 열유속의 등고선을 나타낸 것으로서, 열유속해석 결과로서 물체의 표면을 통하여 열 유입을 모형화하기 위한 것이다. 단위면적에 대한 단위 시간의 에너지로 정의되며, 구조물의 표면이 크면 클수록 생성되는 에너지의 크기도 증가된다. 열유속 값은 아래쪽 봉 부분에서 0. | |
본 연구에서 Z축방향의 열유속의 해석 결과는? | 11697 W/mm2으로 가장 많고 전반적으로 위쪽 부분으로 길수록 열유속이 작아짐을 알 수 있다. Z축방향의 열유속의 해석 결과로서, 열유속 값은 아래쪽 봉 부분에서 0.10647 W/mm2으로 두드러지게 많아 보이고 전반적으로 위쪽 부분으로 길수록 열유속은 작아짐을 알 수 있다. |
J. W. Choi & D. G. Kwag. (2019). A Study on the Thermal Analysis of the Valve in the Selective Catalytic Reduction(SCR) System. Journal of the Korea Convergence Society, 10(8), 153-158. DOI : 10.15207/JKCS.2019.10.8.153
G. G. Choi & J. U. Cho. (2017). Convergence Study due to the Configuration of Radiant Heat Panel of Automotive LED Heat Lamp. Journal of the Korea Convergence Society, 8(3), 199-204. DOI : 10.15207/JKCS.2017.8.3.199
H. H, Hyeon, B. H, Jeong, J. W. Kim & K. Y. Lee. (2019). A Comparison of Performance on the Orthogonal and Refraction Heat Exchanger Shape in Air Ventilation System. Journal of the Korea Convergence Society, 10(7), 281-287. DOI : 10.15207/JKCS.2019.10.7.281
S. C. Han & B. G. Lee. (2018). A Study on Convergence Contact Behavior of Friction Heat and Pad on Disk Brake. Journal of the Korea Convergence Society, 9(1), 283-289. DOI : 10.15207/JKCS.2018.9.1.283
J. H. Lee & J. U. Cho. (2015). Convergence Technique Study through Simulation Thermal Analysis due to the Shape of Electric Heater. Journal of the Korea Convergence Society, 6(6), 241-246. DOI : 10.15207/JKCS.2015.6.6.241
G. G. Choi & J. U. Cho. (2019). Convergence Study on the Thermal Stress According to the Structure of Automotive Heating Seat. Journal of the Korea Convergence Society, 10(7), 169-174. DOI : 10.15207/JKCS.2019.10.7.169
J. L. Cui, M. H. Chey & S. I. Kim. (2016). Seismic Performance of Urban Structures with Various Horizontal Irregularities using Equivalent Static Analysis. Journal of Convergence for Information Technology, 6(1), 25-32. DOI : 10.22156/CS4SMB.2016.6.1.025
W. B. Lee, S. H. Ryu, W. Y. Hao & B. P. Kyung. (2015). Dismantling Simulation of Nuclear Reactor Using Partial Mesh Cutting Method for 3D Model. Journal of Digital Convergence, 13(4), 303-310. DOI : 10.14400/JDC.2015.13.4.303
C. S. Won, N. K. Hur & S. H. Kwon. (2013). Flow Analysis of Automotive Oil Pump of Gerotor Type. The KSFM Journal of Fluid Machinery, 6(4), 7-13. DOI : 10.5293/KFMA.2003.6.4.007
D. R. Lee. (2015). Flow Analysis of a Thermopneumatic Micropump For Different Shapes of PDMS Membrane. Journal of the Korean Society of Mechanical Technology, 17(2), 245-250. DOI : 10.17958/ksmt.17.2.201504.245
J. U. Cho. (2012). Flow analysis of air due to the shapes of motorbike. Journal of Korean Society of Mechanical Technology, 14(1), 53-60. DOI : 10.17958/ksmt.14.1.201202.53
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.