참고문헌 (25)

1. Barton, N. (1999), "TBM performance estimation in rock using Q(TBM)", Tunn. Tunn. Int., 31(9), 30-34. 

2. Barton, N. (2000), TBM Tunneling in Jointed and Faulted Rock, A.A. Balkema, Rotterdam, The Netherlands. 

3. Benato, A. and Oreste, P. (2015), "Prediction of penetration per revolution in TBM tunneling as a function of intact rock and rock mass characteristics", Int. J. Rock Mech. Min. Sci., 74, 119-127. https://doi.org/10.1016/j.ijrmms.2014.12.007. 

   상세보기

4. Bieniawski, R.Z.T., Celada, B., Tardaguila, I. and Rodrigues, A. (2012), "Specific energy of excavation in detecting tunnelling conditions ahead of TBMs", Tunn. Tunn. Int., 26-29. 

5. Blindheim, O.T. (1979), "Boreability predictions for tunneling", Ph.D. Dissertation, The Norwegian Institute of Technology, Trondheim, Norway. 

6. Bruland, A. (1998), "Hard rock tunnel boring", Ph.D. Dissertation, Norwegian University of Science and Technology (NTNU), Trondheim, Norway. 

7. Celada, B., Galera, J.M., Munoz, C. and Tardaguila, I. (2009), "The use of the specific drilling energy for rock mass characterization and TBM driving during tunnel construction", Proceedings of the ITA-AITES World Tunnel Congress, Budapest, Hungary, May. 

8. Chang, S., Choi, S., Bae, G. and Jeon, S. (2006a), "Performance prediction of TBM disc cutting on granitic rock by the linear cutting test", Tunn. Undergr. Sp. Technol., 21(3-4), 271. 

   상세보기

9. Chang, S., Choi, S., Lee, S., Bae, G. and Jeon, S. (2006b), "Derivation of an optimum prediction model of a TBM cutterhead equipped with disc cutters", Proceedings of the KTA 2006 Symposium, Seoul, South Korea, October. 

10. Delisio, A. and Zhao, J. (2014), "A new model for TBM performance prediction in blocky rock conditions", Tunn. Undergr. Sp. Technol., 43, 440-452. https://doi.org/10.1016/j.tust.2014.06.004 

    상세보기

11. Delisio, A., Zhao, J. and Einstein, H.H. (2013), "Analysis and prediction of TBM performance in blocky rock conditions at the Lotschberg Base Tunnel", Tunn. Undergr. Sp. Technol., 33, 131-142. https://doi.org/10.1016/j.tust.2012.06.015 

    상세보기

12. Farrokh, E., Rostami, J. and Laughton, C. (2012), "Study of various models for estimation of penetration rate of hard rock TBMs", Tunn. Undergr. Sp. Technol., 30, 110-123. https://doi.org/10.1016/j.tust.2012.02.012 

    상세보기

13. Gong, Q.M. and Zhao, J. (2009), "Development of a rock mass characteristics model for TBM penetration rate prediction", Int. J. Rock Mech. Min. Sci., 46(1), 8-18. https://doi.org/10.1016/j.ijrmms.2008.03.003. 

    상세보기

14. Hassanpour, J., Ghaedi Vanani, A.A., Rostami, J. and Cheshomi, A. (2016), "Evaluation of common TBM performance prediction models based on field data form the second lot of Zagros water conveyance tunnel (ZWCT2)", Tunn. Undergr. Sp. Technol., 52, 147-156. https://doi.org/10.1016/j.tust.2015.12.006. 

    상세보기

15. Hassanpour, J., Rostami, J. and Zhao, J. (2011), "A new hard rock TBM performance prediction model for project planning", Tunn. Undergr. Sp. Technol., 26, 595-603. https://doi.org/10.1016/j.tust.2011.04.004. 

    상세보기

16. Minh, V.T., Katushin, D., Antonov, M. and Veinthal, R. (2017), "Regression models and fuzzy logic prediction of TBM penetration rate", Open Eng., 7(1), 60-68. https://doi.org/10.1515/eng-2017-0012. 

    상세보기

17. Mobarral, Y., Anbaranil, M.R. and Akbaril, E. (2013), "A statistical model for the prediction of TBM penetration rate using rock mass characteristics in the TBM-driven Golab Water Transfer Tunnel", Proceedings of the 4th International Joint Conference on Advances in Engineering and Technology-AET 2013, NCR, India, December. 

18. Rostami, J. (1997), "Development of a force estimation model for rock fragmentation with disc cutters through theoretical modeling and physical measurement of crushed zone pressure", Ph.D. Dissertation, Colorado School of Mines, Golden, Colorado, U.S.A. 

19. Rostami, J. and Ozdemir, L. (1993), "A new model for performance prediction of hard rock TBMs", Proceedings of the Rapid Excavation Tunneling Conference (RETC), Boston, Massachusetts, U.S.A., June. 

20. Salimi, A., Rostami, J., Moormann, C. and Delisio, A. (2016), "Application of non-linear regression analysis and artificial intelligence algorithms for performance prediction of hard rock TBMs", Tunn. Undergr. Sp. Technol., 58, 236-246. https://doi.org/10.1016/j.tust.2016.05.009. 

    상세보기

21. Teale, R. (1965), "The concept of specific energy in rock drilling", Int. J. Rock Mech. Min. Sci., 2(1), 57-73. https://doi.org/10.1016/0148-9062(65)90022-7. 

    상세보기

22. Yagiz, S. (2002), "Development of rock fracture and brittleness indices to quantify the effects of rock mass features and toughness in the CSM model basic penetration for hard rock tunneling machines", Ph.D. Dissertation, Colorado School of Mines, Golden, Colorado, U.S.A. 

23. Yagiz, S. (2008), "Utilizing rock mass properties for predicting TBM performance in hard rock condition", Tunn. Undergr. Sp. Technol., 23(3), 326-339. https://doi.org/10.1016/j.tust.2007.04.011. 

    상세보기

24. Zhang, G., Tan, J., Zhang, L. and Xiang, Y. (2015), "Linear regression analysis for factors influencing displacement of high-filled embankment slopes", Geomech. Eng., 8(4), 511-521. https://doi.org/10.12989/gae.2015.8.4.511. 

    상세보기

25. Zhou, W., Li, S.L., Ma, G., Chang, X.L., Cheng, Y.G. and Ma, X. (2016), "Assessment of the crest cracks of the Pubugou rockfill dam based on parameters back analysis", Geomech. Eng., 11(4), 571-585. https://doi.org/10.12989/gae.2016.11.4.571. 

    상세보기

활용도 Top5 논문

더보기

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.