최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.14 no.3, 2020년, pp.31 - 36
김선경 (서울과학기술대학교 기계시스템디자인공학과) , 박재은 (서울과학기술대학교 기계시스템디자인공학과)
In injection molding processes, the property of molten resin should be characterized accurately. Among several properties, the PvT state is the most important one, since it affects the shrinkage, warpage, molded weight, and the part density. Thus, the PvT data is crucial to the simulation of the inj...
Stanek, M., Manas, D., Manas, M., & Suba, O., "Optimization of injection molding process", International journal of mathematics and computers in simulation, 5(5), pp. 413-421, 2011.
Chang, R. Y., & Tsaur, B. D., "Experimental and theoretical studies of shrinkage, warpage, and sink marks of crystalline polymer injection molded parts", Polymer Engineering & Science, 35(15), pp. 1222-1230, 1995.
Zoller, P., "A study of the pressure-volume-temperature relationships of four related amorphous polymer: polycarbonate, polyarylate, phenoxy, and polysulfone", Journal of Polymer Science (Polymer Physics Edition), 20(8), pp. 1453-1464, 1982.
Wunderlich, B., "In Thermal Characterization of Polymeric Materials(E. A. Turi, Ed)", Academic Press: New York, 1981.
Jong-Chan Won, "PvT-Behavior for Analysis of Polymer Properties", Polymer Science and Technology, 12(5), pp. 764-775, 2001,
Seong-Wook Kang, Seong-Hun Kim, "Studies on the Compressibility and Volumetric Expansivity of Amorphous Polymer ABS and SAN Using PVT Measurements", Textile science and engineering, 44(5), pp. 268-273, 2007.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.