최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.29 no.5, 2020년, pp.265 - 271
김성호 (한국생산기술연구원 뿌리기술연구소) , 박남수 (한국생산기술연구원 뿌리기술연구소) , 송정한 (한국생산기술연구원 뿌리기술연구소) , 노우람 (한국생산기술연구원 뿌리기술연구소) , 박근영 ((주)오스템) , 배기현 (한국생산기술연구원 뿌리기술연구소)
The purpose of this paper is to analyze the numerical simulation accuracy according to the CFRP modeling method in the CFRP-Al alloy SPR (Self-Piercing Rivet) joint process. The mechanical properties of the CFRP, aluminum sheet are precisely obtained from the tensile test according to the loading di...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Y.W. Ma, M. Lou, Y.B. Li, and Z.Q. Lin, M.S.Uddin, G.Littlefair, A.R.Dixit, S.Chattopadhyaya, 2018, Effect of rivet and die on self-piercing rivetability of AA6061-T6 and mild steel CR4 of different gauges, J. Mater. Process. Technol., Vol. 251, pp. 282-294, https://doi.org/10.1016/j.jmatprotec.2017.08.020
H. Jiang, L. Sun, J. Liang, G. Li, and J. Cui, 2019, Shear failure behavior of CFRP/Al and steel/Al electromagnetic self-piercing riveted joints subject to high-speed loading, Compos. Struct., Vol. 230, 111500. https://doi.org/10.1016/j.compstruct.2019.111500
S. P. Sunday, 1983, Self-piercing rivets for aluminum components, SAE Technical Paper, No. 830526. https://doi.org/10.4271/830526
A. Pramanik, A.K. Basak, Y. Dong, P.K. Sarker, 2017, Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys-A review, Composites Part A, Compos. Pt. A-Appl. Sci. Manuf., Vol.101, pp. 1-29. https://doi.org/10.1016/j.compositesa.2017.06.007
H.M. Rao, J. Kang, G. Huff, K. Avery, 2018, Impact of specimen configuration on fatigue properties of selfpiercing riveted aluminum to carbon fiber reinforced polymer composite, Int. J. Fatigue, Vol. 113, pp. 11-22
J. Liang, H. Jiang, J. Zhang, X. Wu, X. Zhang, G. Li, J. Cui, 2019, Investigations on mechanical properties and microtopography of electromagnetic self-piercing riveted joints with carbon fiber reinforced plastics/aluminum alloy 5052, Arch. Civ. Mech. Eng., Vol. 19, pp. 240-250, https://doi.org/10.1016/j.acme.2018.11.001,
R. Porcaro, A. G. Hanssen, M. Langseth, A. Aalberg, 2006, The behaviour of a self-piercing riveted connection under quasi-static loading conditions, Int. J. Solid Struct., Vol. 43, pp. 5110-5131, https://doi.org/10.1016/j.ijsolstr.2005.10.006
R. Porcaro, A. G. Hanssen, M. Langseth, A. Aalberg, 2006, An experimental investigation on the behaviour of self-piercing riveted connections in aluminium alloy AA6060, Int. J. Crashworthiness, Vol. 11, pp. 397-417. https://doi.org/10.1533/ijcr.2005.0108
W. G. Drossel, R. Mauermann, R. Grutzner and D. Matthess, 2013, Numerical and Experimental Analysis of Self Piercing Riveting Process with Carbon Fiber-Reinforced Plastic and Aluminium Sheets, Key Eng. Mater., Vol. 554, pp. 1045-1054,. 10.4028/www.scientific.net/KEM.554-557.1045
S.H. Kim, G. Bae, J.H. Song, K.Y. Park and N. Park, 2020, Influence of the plastic property of the rivet on the numerical prediction of the Self-Piercing Rivet (SPR) Joining, Proc. Kor. Soc. Tech. Plast. Conf., Vol. 00, No. 0, http://dx.doi.org/10.5228/KSTP.
T. Inada, Y. Shimamura, A. Todoroki and H. kobayashi, 2004, Development of the two-step delamination identification method by resonant and anti-resonant frequency changes, Key Eng. Mater., Vol. 270, pp. 1852-1858, DOI: 10.4028/www.scientific.net/KEM.270-273.1852
F. Hirsch, S. Muller, M. Machens, R. Staschoko, N. Fuchs and M. kastner, 2017, Simulation of self-piercing rivetting processes in fiber reinforced polymers: Material modelling and parameter identification, J. Mater. Process. Technol. Vol. 241, pp. 164-177, https://doi.org/10.1016/j.jmatprotec.2016.10.010
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.