최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공간구조학회논문집 = Journal of the Korean Association for Spatial Structures, v.20 no.3, 2020년, pp.27 - 34
이승재 (한국기술교육대학교 건축공학과) , 강창훈 (현대엔지니어링(주) 기술연구소) , 박재성 ((주)동양구조안전기술 연구소) , 곽의신 ((주)효성구조엔지니어링) , 손수덕 (한국기술교육대학교 건축공학과)
This paper examines the seismic performance and structural design of the ceiling bracket-type modular connection. The bracket-type system reduces the cross-sectional area loss of members and combines units using fitting steel plate, and it has been developed to be fit for medium-story and higher-sto...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
모듈러 구조 시스템이 하나의 건축 구조물로서의 개념을 얻기까지의 최근의 시도는 어떤 패러다임을 가져왔는가? | 모듈러 구조 시스템이 임시 가설물이나 주택이 아닌 하나의 건축 구조물로서의 개념을 얻기까지는 많은 기술자와 연구자들의 연구와 다양한 시도가 있었다. 최근 들어 이러한 시도는 중고층 빌딩에 모듈러 시스템을 적용하기 위한 아이디어들로 나타나기 시작했고, 3D 프린터 분야와 더불어 미래의 새로운 건축 설계 패러다임을 제시하고 있다. 특히 모듈러 수요에 대한 확장과 개선된 기술들은 많은 건설 시공사들의 관심을 불러일으켰으며, 새로운 기술의 영역으로 재형성되었다. 이러한 기술 중중고층 빌딩을 위한 시스템 개선의 문제들은 주로 접합부의 개발과 내진 성능을 확보1-3)함으로서 해결되었고, BIM 기술의 접목4)이나 유닛의 개발 등이 실험적 또는 해석적인 방법으로 다루어졌다5-7). | |
현장에서 접합하는 공정에서 발생하는 단면의 손실을 최소화한 방법는 실험 결과 값은 어떠한가? | 이 중 브래킷형 접합부3)를 가진 모듈러 구조는 낄 판을 이용해 다른 유닛과의 접합을 시도한 것으로 단면의 손실을 줄여 접합부 강성을 높이고, 지진 에너지를 잘 흡수할 수 있게 고안되었다. 공장 생산을 통해 양질의 유닛을 생산하고 현장에서 접합하는 공정에서 발생하는 단면의 손실을 최소화한 방법은 완전 강접합 접합부(Fully restraint moment connection)에 가까운 실험 결과를 얻을 수 있었고, 다양한 파라미터에 대한 영향이 연구되었다[Fig. 1]. |
Jellen, A. C., & Memari, A. M. (2013). The State-of-the-Art Application of Modular Construction to Multi-Story Residential Buildings. Proceedings of the 1st Residential Building Design & Construction Conference, USA, pp.284-293
Modular Building Institute. (2011). Permanent Modular Construction 2011 Annual Report. Retrieved from http://www.modular.org/documents/document_publication/2011permanent.pdf
Lee, S., Park, J., Shon, S., & Kang, C., "Seismic Performance Evaluation of the Ceiling-Bracket-Type Modular Joint with Various Bracket Parameters", Journal of Constructional Steel Research, Vol.150, pp.298-325, 2018, doi: 10.1016/j.jcsr.2018.08.008
Lee, C., & Lim, S. (2012). A research & development on BIM design systems of Urban-life-housing. Proceedings of the Annual Conference of the Architectural Institute of Korea 2012, Structure & Construction, Republic of Korea, Vol.32, No.2, pp.97-98
Lee, S., Park, J., Kwak, E., Shon, S., Kang, C., & Choi, H., "Verification of the Seismic Performance of a Rigidly Connected Modular System Depending on the Shape and Size of the Ceiling Bracket", Materials, Vol.10, No.3, 2017, doi: 10.3390/ma10030263
Lacey, A. W., Chen, W., Hao, H. & Bi, K., "Structural response of modular buildings - An overview", Journal of Building Engineering, Vol.16, pp.45-56, 2018, doi: 10.1016/j.jobe.2017.12.008
KOLAS, Korea Laboratory Accreditation. (2020.09). Retrieved from http://www.knab.go.kr/kolas
ANSYS, "Theory Reference-Release 5.6" Kohnke, P., Ed.; ANSYS Inc.: Canonsburg, PA, USA, 1999.
Kim, J., Yoon, J. C., & Kang, B. S., "Finite element analysis and modeling of structure with bolted joints", Applied Mathematical Modelling, Vol.31, No.5, pp.895-911, 2007, doi: 10.1016/j.apm.2006.03.020
Architectural Institute of Korea, "Korean building code and commentary", Architectural Institute of Korea, 2016.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.