최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전기전자학회논문지 = Journal of IKEEE, v.24 no.3, 2020년, pp.883 - 889
고영진 (Dept. of Electrical Engineering, Tongmyong University) , 김귀남 (Dept. of Mechanical and Automotive Engineering, Suncheon Jeil College) , 김용현 (Dept. of Electrical and Semiconductor Engineering, Chonnam National University) , 이범 (Dept. of Electrical and Semiconductor Engineering, Chonnam National University) , 김경민 (Dept. of Electrical and Semiconductor Engineering, Chonnam National University)
In this paper, we propose a method to use PV(Park's Vector) pattern for inductive motor stator fault diagnosis using CNN(Convolution Neural Network). The conventional CNN based fault diagnosis method was performed by imaging three-phase currents, but this method was troublesome to perform normalizat...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
기계적 결함과 전기적 결함의 특징은? | 유도전동기의 고장은 크게 기계적 결함과 전기적 결함요소로 나뉘며, 기계적 결함은 통상 베어링, 회전자바 고장을 나타내며, 전기적 고장은 고정자고장을 나타낸다[1]. 고장빈도는 기계적 결함이 많으나, 상시 점검이 잘 이뤄지는 부분이며, 고장진단 시스템 측면에서도 DFT를 이용한 측대파 알고리즘이 구축되어 있어 고장진단에 유용하게 활용되고 있다[2]. 하지만, 전기적 결함은 점검과정에서 육안으로 확인이 어려워 시스템적 측면으로 의존해야하나 시스템적 측면에서 진단이 이뤄질 시 미세한 결함을 검출하는데 어려움이 따른다. 이에 많은 연구들에서는 이를 ITSC(Inter Turn Short Circuit)이라 정의하여 이를 진단하는데 연구를 진행하고 있다[3]. | |
유도전동기의 고장은 크게 어떻게 나뉘는가? | 유도전동기의 고장은 크게 기계적 결함과 전기적 결함요소로 나뉘며, 기계적 결함은 통상 베어링, 회전자바 고장을 나타내며, 전기적 고장은 고정자고장을 나타낸다[1]. 고장빈도는 기계적 결함이 많으나, 상시 점검이 잘 이뤄지는 부분이며, 고장진단 시스템 측면에서도 DFT를 이용한 측대파 알고리즘이 구축되어 있어 고장진단에 유용하게 활용되고 있다[2]. | |
본 논문에서는 최근 AI기술을 통한 다양한 진단이 적용됨에 따라 유도전동기의 고정자 고장진단을 위한 효율적인 방법을 제시하였다, 어떤 방법이 효율적인가? | AI 기술 중, CNN을 이용한 방법은 2차원 데이터의 입력이 용이하고 훈련이 용이하며, 적은 매개변수라는 장점이 있어 최근 많은 연구가 진행되고 있다. 이러한 이유로 유도전동기 고장진단에 있어서 다양한 특징(전류, 진동, 소음 등)을 이미지화하여 적용하는 기술이 연구되고 있다. 하지만, CNN을 이용한 유도전동기 고장진단에 있어서 이미지의 정규화과정을 임의로 설정해야하는 번거로움이 있다. 이에 본 논문에서는 3상 전류성분의 데이터를 PV 패턴으로 나타내어 자동적으로 정규화가 이뤄지도록 하였으며, 특정 패턴으로 정규화된 이미지로 인해 기존의 방법보다 18.18[%] 높은 정확도가 나타남을 실험을 통해 확인 할 수 있었다. |
Y.-J. Goh and O. Kim, "Linear Method for Diagnosis of Inter-Turn Short Circuits in 3-Phase Induction Motors," Applied Sciences, vol.9, no.22, pp.4822, 2019. DOI: 10.3390/app9224822
C. Yang, "Electrical monitoring for reliable detection of stator core lamination and rotor faults diagnosis in 3-phase induction motor," Doctor thesis, Korea University, 2019.
Y. Chen, X. Zhao, Y. Yang and Y. Shi "Online Diagnosis of Inter-turn Short Circuit for Dual- Redundancy Permanent Magnet Synchronous Motor Based on Reactive Power Difference," Energies, vol.12, no.3, pp.510, 2019. DOI: 10.3390/en12030510
Y.-J, Goh and K.-M. Kim, "Inter-turn Short Circuit Diagnosis Using New D-Q Synchronous Min-Max Coordinate System and Linear Discriminant Analysis," Applied Sciences, vol.10. no.6, pp.1996, 2020. DOI: 10.3390/app10061996
S. E. Pandarakone, Y. Mizuno and H. Nakamura, "A Comparative Study between Machine Learning Algorithm and Artificial Intelligence Neural Network in Detecting Minor Bearing Fault of Induction Motors," Energies, vol.12, no.11, pp.2105, 2019. DOI: 10.3390/en12112105
F. Filippetti, G. Frauceschini, C. Tassoni, and P. Vas, "Recent developments of induction motor drives fault diagnosis using AI techniques," IEEE Trans. on Enegy Conversion, vo1.19, no.4, pp. 1108-1116, 2004. DOI: 10.1109/41.873207
J. H. Han, D. J. Choi, S. K. Hong, and J. S. Kim, "Motor fault diagnosis using CNN based deep learning algorithm considering motor rotating speed," 2019 IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA), pp.440-445, 2019. DOI: 10.1109/IEA.2019.8714900
P. Chattopadhyay, N. Saha, C. Delpha and J. Sil, "Deep learning in fault diagnosis of induction motor drives," in Proc. of the 2018 Prognostics and System Health Management Conference pp. 1068-1073, 2018. DOI: 10.1109/PHM-Chongqing.2018.00189
M. Skowron, T. Kowalska, M. Wolkiewicz, and C. T. Kowalski, "Convolutional neural networkbased stator current data-driven incipient stator fault diagnosis of inverter-fed induction motor," Energies, vol.13, no.6, pp.1475, 2020. DOI: 10.3390/en13061475
B.-S. Jeon, D.-J. Lee, S.-H, Lee, J.-W. Ryu and M.-G. Chun, "Fault Diagnosis of Induction Motor by Fusion Algorithm based on PCA and IDA," Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, vol.19, no.2, pp.152-159, 2005. http://dx.doi.org/10.5207/JIEIE.2005.19.2.152
A. J. M. Cardoso, S. M. A. Cruz and D. S. B. Fonseca, "Inter-Turn Stator Winding Fault Diagnosis in Three-Phase Induction motors, by Park's Vector Approach," IEEE Trans. Energy Convers, vol.14, no.x, pp.595-598, 1999. DOI: 10.1109/IEMDC.1997.604083
D.-W. Kim, J.-W. Seok, and K.-S. Bae "Target/non-target classification using active sonar spectrogram image and CNN," Institute of Korean Electrical and Electronics Engineers, vol.22, no.4, pp. 044-1049, 2018. DOI: 10.9717/kmms.2018.21.9.1062
H. N. Nguyen and C. Lee, "Effects of Hyperparameters and Dataset on CNN Training," Institute of Korean Electrical and Electronics Engineers, vol.22, no.1, pp.14-20, 2018. DOI: 10.7471/ikeee.2018.22.1.14
※ AI-Helper는 부적절한 답변을 할 수 있습니다.