최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국건축시공학회지 = Journal of the Korea Institute of Building Construction, v.20 no.5, 2020년, pp.433 - 440
한천구 (Department of Architectural Engineering, Cheong ju University) , 한민철 (Department of Architectural Engineering, Cheong ju University) , 신용섭 (Department of Architectural Engineering, Cheong ju University)
In this study, a new type of Durometer was invented by modifying the currently used Durometer with the hemisphere shaped needle to columnar shaped needle. The aim of the study is, hence, to provide the feasibility of the advanced Durometer for assessing setting time of the concrete. Generally, the f...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
콘크리트 공사에서 타설완료 후 마감작업은 무슨 목적이 있는가? | 콘크리트 공사에서 타설완료 후 마감작업은 표면 평활화, 수밀성 향상, 침하 및 소성수축 균열방지 등의 목적으로 반드시 실시되어야 한다. 그런데, 표면마감작업은 초결과 종결 사이의 소성상태에서 실시 되어야 하는데, 종전의 경우는 기능공의 감에 의해 결정되었다. | |
개량형 듀로미터를 설명하시오. | 개량형 듀로미터는 바늘을 원주형으로 수정하므로서 콘크리트 혹은 모르타르 접촉면에서의 저항성을 높여 두 개의 듀로미터를 하나로 해결할 수 있고, 측정치도 초결이 작고 종결이 큰 값으로 순리적이며, 반구형의 눌려진 바늘틈 사이로 시멘트 페이스트나 모르타르가 밀려 들어가는 고장도 줄일 수 있을 것으로 추측되어 개량하였다. | |
콘크리트의 실험결과 콘크리트의 기초적 특성은 무엇인가? | 콘크리트의 실험결과로 콘크리트의 기초적 특성은 Table 9와 같다. 먼저 굳지않은 콘크리트의 특성으로 FA와 CGS를 치환함에 따라서 둥근 입자 모양에 기인하여 유동성은 증가하였고, 미연소 탄분에 의한 AE제 흡착작용으로 공기량은 저하되는 것으로 나타났다. 압축강도는 FA의 치환율이 증가할수록 28일 이내의 재령에서는 낮은 강도를 나타내고 있는데, 이는 FA의 특성인 OPC 수화반응 후 진행되는 포졸란 반응에 기인하여 28일 이내에서는 강도발현이 지연되어 낮게 나타난 것으로 판단된다. 또한 CGS의 치환율이 증가하였을 경우에는 강도가 증가하는 것으로 나타났는데, 이는 공기량 감소 및 CGS의 입도분포에 따른 최밀충전 효과에 의한 것으로 판단된다. |
Korea Concrete Institue. Concrete working manual, Concrete curing. Korea: Kimoondang; 2010. p. 17-8.
Han MC, Shin YS, Han ID. Estimation of the setting time of the high flowing concrete using durometer. Journal of the Architectural Institute of Korea. 2019 sep;35(9):143-50. https://doi.org/10.5659/JAIK_SC.2019.35.9.143
Lee HJ, Han JH, Kim TW, Lee DY, Jang DB, Han MC. Blast furnace slag using durometer determination of the surface closing time of high fluidity concreate. Proceedings of the Korea Concrete Institute; 2018 May 02-04; Changwon, Korea. Seoul (Korea): Korea Concrete Institute; 2018. p. 353-4.
Han MC, Han ID, Shin YS. Estimation of setting time of concrete using rubber hardness meter. Journals of the Korean Recycled Construction Resources Institute. 2019 Dec;7(4):358-66. https://doi.org/10.14190/JRCR.2019.7.4.358
Han MC, Lee HJ. Setting time evaluation of high flowable ternary concrete mix using durometer. Journals of the Korean Recycled Construction Resources Institute. 2020 Mac;8(1):33-8. https://doi.org/10.14190/JRCR.2020.8.1.33
Lee HJ, Chol YH, Lee YJ, Shin YS, Han MC, Han CG. An analysis on the possibility of using the improved durometer in estimating the setting time according to the temperature variation of high strength concrete. Proceedings of the Architectural Institute of Korea; 2019 Api 26-7; Seoul, Korea. Seoul (Korea): Architectural Institute of Korea; 2019. p. 620-1.
Lee HJ, Sin SJ, Hyun SY, Shin YS, Jang DB, Han MC. Estimation of setting time for concrete replaced by blast-furnace slag using improved durometer. Proceedings of the Architectural Institute of Korea; 2019 Api 26-7; Seoul, Korea. Seoul (Korea): Architectural Institute of Korea; 2019. p. 622-3.
Lee HJ, Han JH, Shin YS, Lee JS, Han ID, Han MC. Estimation of setting time of concrete incorporating blast-furnace slag using improved durometer. Proceedings of the Korea Concrete Institute; 2019 May 08-10: Jeju, Korea. Seoul (Korea): Korea Concrete Institute; 2019. p. 657-8.
Lee HJ, Choi YH, Han JH, Shin YS, Han ID, Han MC. Estimation of setting time of high strength bs concrete through mock-up test using improved durometer. Proceedings of the Korea Concrete Institute; 2019 May 08-10: Jeju, Korea. Seoul (Korea): Korea Concrete Institute; 2019. p. 679-80.
Lee HJ, Shin YS, Seo HG, Han ID, Han MC, Han CG. Utilization of improved durometer when estimating setting time of FA replacement concrete using CGS for fine aggregate. Proceedings of the The Korean Institute of Building Construction: 2019 Oct 31-Nov 01; Chungju, Korea. Seoul (Korea). The Korean Institute of Building Construction; 2019. p. 81-2.
Lee HJ, Lee YJ, Hyun SY, Shin YS, Han MC. Han CG. Estimation of setting time using improved type durometer of fly ash concrete. Proceedings of The Korean Recycled Construction Resources Institute: 2019 Api 03-5; Wonju, Korea. Seoul (Korea). The Korean Recycled Construction Resources Institute; 2019. p. 79-80.
Lee HJ, Choi YH, Lee JS, Han DY, Han ID. Han MC. Estimation of setting time using improved type durometer of powdered high fluidity concrete. Proceedings of The Korean Recycled Construction Resources Institute: 2019 Api 03-5; Wonju, Korea. Seoul (Korea). The Korean Recycled Construction Resources Institute; 2019. p. 17-8.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.