최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of power electronics, v.20 no.6, 2020년, pp.1445 - 1455
Bouafassa, Amar (Department of Electronics, Electrical Engineering and Automation, National Polytechnic School of Constantine) , Fernandez-Ramirez, Luis M. (Research Group in Sustainable and Renewable Electrical Technologies, Department of Electrical Engineering, Higher Polytechnic School of Algeciras, University of Cadiz) , Babes, Badreddine (Research Center in Industrial Technologies (CRTI))
This paper proposes an efficient bridgeless power factor corrected (PFC) modified single ended primary inductor converter (SEPIC) for arc welding power supplies (AWPS). The overall configuration is composed of two converters: (1) a modified bridgeless SEPIC PFC converter, which is controlled by a PI...
Narula, S., Singh, B., Bhuvaneshwari, G.: Interleaved CSC converter-based power factor corrected switched mode power supply for arc welding. IET Power Electron. 9(12), 2404-2415 (2016)
Narula, S., Singh, B., Bhuvaneswari, G., Pandey, R.: Improved power quality bridgeless converter-based SMPS for arc welding. IEEE Trans. Ind. Electron. 64(1), 275-284 (2017)
Dugan, R.C., McGranaghan, M.F., Santoso, S., Wayne Beaty, H.: Electrical power system quality, 2nd edn. McGraw-Hill, USA (2003)
Narula, S., Singh, B., Bhuvaneswari, G.: Power factor corrected welding power supply using modified zeta converter. IEEE Trans. Emerg. Sel. Topics Power Electron. 4(2), 617-625 (2016)
Narula, S., Singh, B., Bhuvaneswari, G.: Improved power quality based welding power supply with over current handling capability. IEEE Trans. Power Electron. 31(4), 2850-2859 (2016)
Madhulingam, T., Subbaiyan, T., Shanmugam, P., Kannan, S.: Design and development of improved power quality based microbutt welding power supply. IET Power Electron. 10(7), 746-755 (2017)
Lee, S.W., Do, H.L.: Efficient bridgeless PFC converter with reduced voltage stress. Int. J. Circuit Theory Appl. 44(7), 1455-1467 (2016)
Liu, Y., Sun, Y., Su, M.: A control method for bridgeless Cuk/SEPIC PFC rectifier to achieve power decoupling. IEEE Trans. Ind. Electron. 64(9), 7272-7276 (2017)
Mahdavi, M., Farzanehfardn, H.: Zero-voltage transition bridgeless single-ended primary inductance converter power factor correction rectifier. IET Power Electron. 7(4), 895-902 (2014)
Kommukuri, V.S., Mohanty, K.B.: Modified bridgeless SEPIC rectifier for power factor correction with reduced switch stress operating in continuous conduction mode. J. Circ. Syst. Comput. 27(8), 185012 (2018)
Singh, B., Kushwaha, R.: A PFC based EV battery charger using a bridgeless isolated SEPIC converter. IEEE Trans. Ind Appl. 56(1), 477-487 (2020)
RomaiNoor, M.K., et al.: Modified single-switch bridgeless PFC SEPIC structure by eliminating circulating current and power quality improvement. IET Power Electron. 12(14), 3792-3801 (2019)
Yang, J., Do, H.: Bridgeless SEPIC converter with a ripple-free input current. IEEE Trans. Power Electron. 28(7), 3388-3394 (2013)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.