최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of Korean Tunnelling and Underground Space Association = 한국터널지하공간학회논문집, v.22 no.6, 2020년, pp.623 - 641
김정주 (한전 전력연구원 차세대송변전연구소) , 류희환 (한전 기술기획처 기술전략실) , 김경열 (한전 전력연구원 차세대송변전연구소) , 홍성연 (한전 전력연구원 차세대송변전연구소) , 정주환 (한전 전력연구원 차세대송변전연구소) , 배두산 (한전 전력연구원 차세대송변전연구소)
About 5 km length of tunnels were constructed by mechanized tunnelling method using closed type shield TBM. In order to avoid construction delay problems for ensuring timely electricity transmission, it is necessary to increase the prediction accuracy of the excavation process involving machines acc...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Bruland, A. (2000), Hard rock tunnel boring: the boring process, Ph.D. Dissertation, Department of Building and Construction Engineering, Norwegian University of Science and Technology, pp. 1-86.
Geng, Q., Wei, Z., Meng, H., Macias, F.J. (2016), "Mechanical performance of TBM cutterhead in mixed rock ground conditions", Tunnelling and Underground Space Technology, Vol. 57, pp. 76-84.
Gong, Q.M., Zhao, J., Jiang, Y.S. (2007), "In situ TBM penetration tests and rock mass boreability analysis in hard rock tunnels", Tunnelling and Underground Space Technology, Vol. 22, No. 3, pp. 303-316.
Jing, L.J., Li, J.B., Yang, C., Chen, S., Zhang, N., Peng, X.X. (2019), "A case study of TBM performance prediction using field tunnelling tests in limestone strata", Tunnelling and Underground Space Technology, Vol. 83, pp. 364-372.
KAIA (2020), Development of core technology for urban small-diameter utility tunnel construction, 20SCIP-B105148-06, Center for Utility Tunnel, pp. 93.
Kim, J.J., Kim, K.Y., Ryu, H.H., Jung, J.H., Hong, S.Y., Jo, S.A., Bae, D.S. (2020a), "Development of a TBM advance rate model and its field application based on full-scale shield TBM tunnelling tests in 70 MPa of artificial rock mass", KEPCO Journal on Electric Power and Energy, Vol. 6, No. 3, pp. 305-313.
Kim, K.Y., Kim, J.J., Ryu, H.H., Rehman, H., Jafri, T.H., Yoo, H.K., Ha, S.G. (2020b), "Estimation method for TBM cutterhead drive design based on full-scale tunneling tests for application in utility tunnels", applied sciences, Vol. 10, No. 15, pp. 1-20.
Peng, X., Liu, Q., Pan, Y., Lei, G., Wei, L., Luo, C. (2018), "Study on the influence of different control modes on TBM disc cutter performance by rotary cutting tests", Rock Mechanics and Rock Engineering, Vol. 51, No. 3, pp. 961-967.
Rostami, J. (1997), Development of a force estimation model for rock fragmentation with disc cutters through theoretical modeling and physical measurement of crushed zone pressure, Ph.D. Dissertation, Department of Mining Engineering, Colorado School of Mines, pp. 54-240.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.