최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기지질공학 = The journal of engineering geology, v.31 no.4, 2021년, pp.561 - 577
장현식 (강원대학교 지구자원연구소) , 심민용 (강원대학교 지구물리학과) , 장보안 (강원대학교 지구물리학과)
The ten standard roughness profiles suggested by Barton and Choubey (1977) were extended to make three-dimensional (3D) joint models whose profiles were identical at any cross section. Replicas of joint models were produced using plaster of Paris, and direct shear tests were performed to verify the ...
Alejano, L.R., Muralha, J., Ulusay, R., Li, C.C., Perez-Rey, I., Karakul, H., Chryssanthakis, P., Aydan, O., 2018, ISRM suggested method for determining the basic friction angle of planar rock surfaces by means of tilt tests, Rock Mechanics and Rock Engineering, 51, 3853-3859.
Barton, N., 1973, Review of a new shear-strength criterion for rock joints, Engineering Geology, 7, 287-332.
Barton, N., Choubey, V., 1977, The shear strength of rock joints in theory and practice, Rock Mechanics, 10, 1-54.
Belem, T., Homana-Etienne, F., Souley, M., 2000, Quantitative parameters for rock joint surface roughness, Rock Mechanics and Rock Engineering, 33, 217-242.
Byerlee, J.D., 1967, Frictional characteristics of granite under high confining pressure, Journal of Geophysical Research, 72, 3639-3648.
Cruden, D.M., Hu, X.Q., 1988, Basic friction angles of carbonate rocks from Kananaskis country, Canada, Bulletin of Engineering Geology and the Environment, 38, 55-59.
Fan, W., Cao, P., 2020, A new 3D JRC calculation method of rock joint based on laboratory-scale morphology testing and its application in shear strength analysis, Bulletin of Engineering Geology and the Environment, 79, 345-354.
Gonzalez, J., Gonzalez-Pastoriza, N., Castro, U., Alejano, L.R., Muralha, J., 2014, Considerations on the laboratory estimate of the basic friction angle of rock joints, In: Alejano, R., Perucho, A., Olalla, C., Jimenez, R. (Eds.), Rock Engineering and Rock Mechanics: Structures in and on Rock Masses (EUROCK 2014), ISRM European Regional Symposium, Vigo, 199-204.
Grasselli, G., Egger, P., 2003, Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters, International Journal of Rock Mechanics and Mining Sciences, 40, 25-40.
Grasselli, G., Wirth, J., Egger, P., 2002, Quantitative three-dimensional description of a rough surface and parameter evolution with shearing, International Journal of Rock Mechanics and Mining Sciences, 39, 789-800.
Hsiung, S.M., Ghosh, A., Ahola, M.P., Chowdhury, A.H., 1993, Assessment of conventional methodologies for joint roughness coefficient determination, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 30, 825-829.
Jang, B.A., Kim, T.H., Jang, H.S., 2010, Characterization of the three dimensional roughness of rock joints and proposal of a modified shear strength criterion, The Journal of Engineering Geology, 20, 319-327 (in Korean with English abstract).
Jang, H.S., Jang, B.A., Kim, Y., 2005, Estimation of joint roughness coefficient (JRC) using modified divider method, The Journal of Engineering Geology, 15, 269-280 (in Korean with English abstract).
Jang, H.S., Kang, S.S., Jang, B.A., 2014, Determination of joint roughness coefficients using roughness parameters, Rock Mechanics and Rock Engineering, 47, 2061-2073.
Kulatilake, P.H.S.W., Shou, G., Huang, T.H., Morgan, R.M., 1995, New peak shear strength criteria for anisotropic rock joints, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 32, 673-697.
Ladanyi, B., Archambault, G., 1970, Simulation of shear behaviour of a jointed rock mass, In: Somerton, W.H. (Ed.), Proceedings of the 11th U.S. Symposium on Rock Mechanics (USRMS), Berkeley, 105-125.
Lane, K.S., Heck, W.J., 1964, Triaxial testing for strength of rock joints, In: Spokes, E.M., Christiansen, C.R. (Eds.), Proceedings of the 6th U.S. Symposium on Rock Mechanics (USRMS), Rolla, 98-108.
Lee, K.H., Jang, H.S., Jang, B.A., 2019, Experimental study for optimal method in measuring the basic friction angle of rock, The Journal of Engineering Geology, 22, 565-578 (in Korean with English abstract).
Lee, Y.H., Carr, J.R., Barr, D.J., Hass, C.J., 1990, The fractal dimension as a measure of the roughness of rock discontinuity profiles, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 27, 453-464.
Liu, X.G., Zhu, W.C., Yu, Q.L., Chen, S.J., Li, R.F., 2017, Estimation of the joint roughness coefficient of rock joints by consideration of two-order asperity and its application in double-joint shear tests, Engineering Geology, 220, 243-255.
Maerz, N.H., Franklin, J.A., Bennett, C.P., 1990, Joint roughness measurement using shadow profilometry, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 27, 329-343.
Miller, S.M., McWilliams, P.C., Kerkering, J.C., 1990, Ambiguities in estimating fractal dimensions of rock fracture surfaces, Proceedings of the 31st U.S. Symposium on Rock Mechanics (USRMS), Colden, 147-478.
Park, J.W., Song, J.J., 2013, Numerical method for the determination of contact areas of a rock joint under normal and shear loads, International Journal of Rock Mechanics and Mining Sciences, 58, 8-22.
Patton, F.D., 1966, Multiple modes of shear failure in rock and related material, Ph.D. Thesis, University of Illinois, 282p.
Stimpson, B., 1981, A suggested technique for determining the basic friction angle of rock surfaces using core, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 18, 63-65.
Tse, R., Cruden, D.M., 1979, Estimating joint roughness coefficients, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 16, 303-307.
Wakabayashi, N., Fukushige, I., 1995, Experimental study on the relation between fractal dimension and shear strength, In: Myer, L.R., Cook, N.G.W., Goodman, R.E., Tsang, C.F. (Eds.), Fractured and jointed rock masses, Balkema, Rotterdam, 125-131.
Wang, C., Wang, L., Karakus, M., 2019, A new spectral analysis method for determining the joint roughness coefficient of rock joints, International Journal of Rock Mechanics and Mining Sciences, 113, 72-82.
Wang, G., Zhang, X., Jiang, Y., Wu, X., Wang, S., 2016, Rate-dependent mechanical behavior of rough rock joints, International Journal of Rock Mechanics and Mining Sciences, 83, 231-240.
Wang, G., Zhang, Y., Jiang, Y., Liu, P., Guo, Y., Liu, J., Wang, S., 2018, Shear behaviour and acoustic emission characteristics of bolted rock joints with different roughnesses, Rock Mechanics and Rock Engineering, 51, 1885-1906.
Wu, T.H., Ali, E.M., 1978, Statistical representation of joint roughness, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 15, 259-262.
Yang, Z.Y., Chiang, D.Y., 2000, An experimental study on the progressive shear behavior of rock joints with tooth-shaped asperities, International Journal of Rock Mechanics and Mining Sciences, 37, 1247-1259.
Yu, X., Vayssade, B., 1991, Joint profiles and their roughness parameters, International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 28, 333-336.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.