$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

지상레이저스캐너(TLS) 측량과 가이드라인에 관한 연구
Investigation on Terrestrial Laser Scanner(TLS) Surveying and its Guideline 원문보기

한국지리정보학회지 = Journal of the Korean Association of Geographic Information Studies, v.24 no.4, 2021년, pp.55 - 64  

김진우 ((주)지오앤 기업부설연구소) ,  정운식 (공간정보품질관리원 품질관리본부) ,  이영진 (경일대학교 건설방재공학과)

초록
AI-Helper 아이콘AI-Helper

이 연구는 지상레이저스캐너(TLS)측량에 대한 관측실험과 분석을 통해 TLS 위치정확도와 운용방안을 분석하고 가이드라인을 제시한다. TLS 관측실험에서는 TS/GPS 기준점측량 기반으로 지상기준점과 TLS점을 설치하고 목제 목표판을 설계·제작하여 사용하였다. 실험결과에서는 TLS 스캔 데이터의 RMSE는 축척 1/250의 지형도 제작과 레벨 1/100의 BIM에 활용이 가능하며, 드론영상데이터와 상호보완이 가능하다. 그리고 실험과정과 결과의 분석을 통해 TLS측량에 대한 가이드라인을 제시하였다.

Abstract AI-Helper 아이콘AI-Helper

In this study, the operation method and accuracy of Terrestrial Laser Scanner(TLS) are reviewed and discussed by experimental measurements, and guidelines of TLS surveying operation are proposed. Ground control points and TLS station points were measured by TS and/or GPS, in TLS observation experime...

주제어

표/그림 (19)

참고문헌 (17)

  1. B, van Goor. 2011. Change detection and deformation analysis using terrestrial laser scanning, Delft University. 19-36pp. 

  2. D-L Chen, Y-Y. Lu, Y-M. Chen, L. Ma, D-Z Jla, L.Cheng, M-C Li, D. Hu and X-F He. 2018."Automated and efficient extraction of highway tunnel lining Cross-sections using terrestrial laser scanning(TLS). Laers in Eng. 39:341-353. 

  3. GSI(Geospatial Information Authority of Japan). 2018a. Public Survey Manual Using Ground Laser Scanner. 

  4. GSI(Geospatial Information Authority of Japan). 2018b. Rules of work rules. 

  5. GSI(Geospatial Information Authority of Japan). 2019. Cross-section drawing creation manual using 3D point cloud data. 

  6. Kim, S.T. 2016. An investigation on construction BIM using 3D terrestrial laser scanning systems. Ph.D. Thesis, Univ. of Kyungil, Korea pp.14-20. 

  7. Kim, J.Y. 2014. Accuracyand utility of 3d terrain data using terrestrial LiDAR. Master Thesis, Univ. of Pukyong National, Korea 47pp. 

  8. Kim, J.W. Kim, S.W. and Lee, Y.J. 2020. Analysis and application of a terrestrial laser scanner in smart construction. Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography. 177-179pp. 

  9. Kim, J.W. 2021. A study on the 3d modelling and Applications by terrestrial laser scanner(TLS). Master Thesis, Univ. of Kyungil, Korea. 19-40pp. 

  10. Lee, Y.J. 2018. Precision surveying and instrumentation. Cheong Moon Gak Publishers. 286-305pp. 

  11. Lee, Y.J. Kim, J.W. and Kim, S.W. 2019. Review and analysis of smart construction systems in Korea. KSCE 2019 CONVENTION. 306-307pp. 

  12. Lee, Y.J. 2020. Unified systems on the public good data and the geospatial data in Korea - Digital Twin Data Strategy for the National Infrastructure -. Journal of the Korean Cadastre Information Association. 22(3):98-116. 

  13. MLIT(Ministry of Land, Infrastructure, Transport and Tourism). 2020. As-built management procedure using a ground-based laser scanner (earthwork). 

  14. S.S. Soudarissanane. 2015. The geometry of terrestrial laser scanning; Identification of errors, modeling and mitigation of scanning geometry. Delft University. 13-34pp 

  15. Van Genechten. Bjorn. 2008. Theory and practice on terrestrial laser scanning: Training material based on practical applications. Universidad Politecnica de Valencia Editorial Ver 4. 36-62pp. 

  16. Weixing Wang, Weisen Zhao, Lingxiao Huang, Vivian Vimarlund and Zhiwei Wang. 2014. Applications of terrestrial laser scanning for tunnels: a review. Journal of Traffic and Transportation Engineering (English Edition). 325-337pp. 

  17. Yoo, W.S. 2015. A 3dimensional object modeling via integrated data processing of MMS and laser scanning data. Master Thesis, Univ. of Seoul. 96-97pp. 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

FREE

Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로