$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

전기추진 함정용 프로세서 레버 제어기 설계
Design of Processor Lever Controller for Electric Propulsion System of Naval Ship 원문보기

한국정보통신학회논문지 = Journal of the Korea Institute of Information and Communication Engineering, v.25 no.1, 2021년, pp.134 - 145  

심재순 (Naval System Team3, Naval R&D Center, Hanwha systems) ,  이헌석 (Naval System Team3, Naval R&D Center, Hanwha systems) ,  정성영 (Naval System Team3, Naval R&D Center, Hanwha systems) ,  오진석 (Department of Marine Engineering, Korea Maritime and Ocean University)

초록
AI-Helper 아이콘AI-Helper

함정 추진제어시스템은 축계와 추진엔진의 과토크 및 과부하를 방지하면서 함정 작전요구성능을 만족할 수 있는 효율적인 제어로직 적용이 필수적이다. 이에 따라 함정 시운전 기간 중 추진제어기의 파라미터 값을 수정하는 이른바 튜닝(tuning)과정을 거쳐 제어체계를 최적화 하는 것이 일반적이다. 그러나 이러한 과정에서 초기 설정 값의 오차가 큰 경우 튜닝 시간이 과도하게 소요되거나 오버토크, 오버스피드 및 과출력으로 인해 추진 장비에 손상을 초래할 수 있다. 이에 본 논문에서는 함정 추진체계를 보호하면서 비교적 추진제어기 소프트웨어의 튜닝 경험이 적은 비숙련자도 함정 추진체계를 보호하면서 튜닝시간을 단축할 수 있는 프로세서 레버 제어기 적용을 제안한다. 프로세서 레버 제어기 성능 검증을 위해 시뮬레이션을 활용하여 프로세서 레버 제어기를 적용한 결과와 PI제어기만 적용한 결과를 비교하여 제어 특성 및 추진성능을 분석하였다. 시뮬레이션 결과 프로세서 레버 제어기 기능을 미적용 시 발생하였던 9.74%의 과도응답이 발생하지 않아 추진체계의 안정성을 높일 수 있었으나, 시스템의 응답성이 늦어짐에 따라 함정 추진성능(가속능력)이 감소하였다. 이러한 추진성능의 저하는 프로세서 레버 제어기의 파라미터 값을 조정하여 안정적으로 해결하였다.

Abstract AI-Helper 아이콘AI-Helper

It is common to optimize the propulsion control system through a so-called tuning process that modifies the parameter values of the propulsion control software during a ship commissioning. However, during this process, if the error of the initial setting value is large, the tuning time may take too ...

주제어

표/그림 (27)

참고문헌 (26)

  1. M. C. Timothy, Z. Jim, W. J. Niles, A. P. Frederik and W. M. Thomas, "Hybrid electric drive for DDG-51 class destroyers," American Society of Naval Engineers, vol. 119, no. 2, pp. 83-91, 2007. 

  2. D. I. Choi, H. S. Lee, and J. S. Oh, "Analysis of annual fuel consumption by using bidirectional power conversion with hybrid electric propulsion system in naval ship," The Korean Society of Marin Engineering, vol. 43, no. 4, pp. 299-306, 2019. 

  3. S. Y. Kim, "A study on the adoption on power take off operation mode and fuel-saving effect in the hybrid electric propulsion system for a warship," The Transaction of the Korean Institute of Power Electronics, vol. 24, no. 1, pp. 40-48, 2019. 

  4. H. M. Lee and B. J. Cho, "Analysis of development trend for the integrated power system of naval vessels to perform the high-power and energy mission load platform," The Korean Society of Marine Engineering, vol. 35, no. 6, pp. 796-801, 2011. 

  5. S. H. Ryu, S. Y. Jung, and J. S. Oh, "A study of the hybrid electric drive generating mode in the naval ships," The Korean Society of Marine Engineering, vol. 39, no. 9, pp. 967-972, 2015. 

  6. M. W. Kim, "A study on fuel consumption of combat support ship according to propulsion system," M.S. dissertation, Department of Marin Engineering, Korea Maritime and Ocean University, Korea, 2016. 

  7. S. Y. Jung, "The development of warship propulsion system simulator for ECS reliability," Ph. D. dissertation, Department of Marin Engineering, Korea Maritime and Ocean University, Korea, 2020. 

  8. S. Y. Jung, H. S. Lee, and J. S. Oh, "Development of an ECS simulator for warship propulsion systems," Naval Engineers Journal, vol. 132, no. 4, pp. 133-140, 2020. 

  9. J. W. Jung, "2010 Defense science and technology survey," Defense Agency for Technology and Quality, 2010. doi: 10.23000/TRKO201700003262. 

  10. J. H. Jang, S. W. Shin, M. G. Kim, and J. S. Oh, "Development of CODOG propulsionm system simulator," Journal of the Korea Institute of Information and Communication Engineering, vol. 21, no. 9, pp. 1808-1817, 2017. 

  11. J. H. Jang, D. J Kim, M. G. Kim, and J. S. Oh, "Development of naval ship propulsion system simulator for CODLOG based ECS verification," Journal of the Korea Institute of Information and Communication Engineering, vol. 21, no. 9, pp. 1796-1807, 2017. 

  12. N. Y. Son, H. S. Lee, and J. S. Oh, "Development of propulsion equipment model and simulator for verification of propulsion system," Journal of the Korea Society of Marine Engineering, vol. 43, no. 1, pp. 48-55, 2019. 

  13. S. Y. Kim, "Suppression of the thrust loss for the maximum thrust operation in the electric propulsion ship," Ph. D. dissertation, Seoul National University, 2007. 

  14. "Type 23 Frigate duke class, Power" Conversion, General Electric Company case study, GEA20356, 2012. 

  15. Q. Shen, B. Ramachandran, S. K. Srivastava, M. Andrus, and D. A. Cartes, "Power and energy management in integrated power system," IEEE Electric Ship Technologies Symposium (ESTS), pp. 414-419, 2011. 

  16. "Queen Elizabeth Class(QEC) Aircraft Carrier," Power Conversion, General Electric Company case study, GEA20337, 2012. 

  17. H. M. Lee and B. J. Cho, "Analysis of development trend for the integrated power system of naval vessels to perform the high-power and energy mission load platform," The Korean Society of Marin Engineering, vol. 35, no. 6, pp. 796-801, 2011. 

  18. M. Altosole, U. Campora, M. Figari, M. Laviola, and M. Martelli, "A Diesel Engine Modelling Approach for Ship Propulsion Real-Time Simulators," Journal of Marine Science and Engineering, 2019. 

  19. M. Altosole, G. Benvenuto, and M. Figari, "Performance prediction of a planning craft by dynamic numerical simulation," Proceedings of 7th Symposium on High Speed Marine Vehicles Conference, pp.105-111, 2005. 

  20. U. Campora and M. Figari, "Numerical simulation of ship propulsion transients and full-scale validation," Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Marine Environment. vol. 217, no. 1, pp. 41-52, 2003. 

  21. M. Altosole, M. Figari, M. Viviani, S. Michetti, and A. Millerani Trapani, "Simulation of the dynamic behavior of a CODLAG propulsion plant," Advanced Technologies in Naval Design and Construction The Royal Institution of Naval Architects, pp.109-115, 2010. 

  22. G. Benvenuto, S. Brizzolara, and M. Figari, "Simulation of the propulsion system behavior during ship standard manoeuvres," Proceedings of 8th International Symposium on Practical Design of Ship and Other Floating Structures, vol. 1, pp. 657-663, 2001. 

  23. E. Sarries, Naval ship propulsion and electric power systems selection for optimal fuel consumption, Master's thesis, Massachusetts Institute of Technology, 2011. 

  24. N. Y. Son, "The development of simulator for warship propulsion system using HILS," M.S. dissertation, Department of Marin Engineering, Korea Maritime and Ocean University, Korea, 2020. 

  25. K. W. Lee, K. Y. Yu, S. C. Park, J. S. Kim, M. G. Kim, and M. C. Kim, "Controllable pitch propellers for the simulation of naval ship propulsion system dynamics," Journal of the Korea Society of Marine Engineering, vol. 43, no. 9, pp. 693-700, 2019. 

  26. S. I. Hwang, D. J. Kim, and J. M. Kim, "A study on the propulsion motor modeling techniques for real-time simulation," in Proceeding of the Annual Conference Korea Institute of Military Science and Technology, Jeju, pp. 2251-2252, 2019. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로