최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.12, 2021년, pp.129 - 135
이여울 ((재) 대구기계부품연구원) , 박철우 ((재) 대구기계부품연구원) , 김진록 ((재) 대구기계부품연구원) , 최현진 ((재) 대구기계부품연구원)
Injection molding is a manufacturing method of melting the polymer resin and injecting it into a mold to molding it into the desired form. Due to the short molding time and outstanding formability, complex products can be shaped with high precision and it is the most widely used polymer molding meth...
Choi, H. J., Park, C. W., Choi, S. D., "Analyses on Deformation Patterns Depending on the Injection Process for Rear Lamp Reflectors of Automotive," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 4, pp. 32-37, 2010.
Choi, H. J., Jang, E. S., Lee, H. G., Cha, U. S., and Jeon, S. H., "Tool Changer Structure Analysis of Drum Type Automatic Tool Changer", Proceedings of the KSMPE Spring Conference, pp. 7, 2019.
Choi, H. J., Cho, H. D., and Lee, Y. C., "A Study on the Design of Drum Type Automatic Tool Changer in Horizontal Machining Center", Proceedings of the KSMPE Autumn Conference, pp. 139, 2018.
Choi, H. J., Kwon, S. W., "ATC Dynamic Analysis of Horizontal 2-Head Machining Center", Proceedings of the KSMPE Autumn Conference, pp. 73, 2017.
Park, J. C., Kim, K. M., "Determination of Gate Position Considering Robustness in Injection Mold Design," Journal of the Korean Society of Manufacturing Process Engineers., Vol. 16, No. 5, pp. 113-118, 2017.
Zhai, M. et al., "Automated Selection of Gate Location for Plastic Injection Molding Processing," Polymer-Plastics Technology and Engineering, Vol. 44, pp. 229-242, 2005.
Yamanoi, M. et al., "Application of Birefringence CAE in Mould Design of Optic Lens Injection Molding Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 1-6, 2012.
Lee, B. H. and Kim, B. H., "Optimization of Part Wall Thicknesses to Reduce Warpage of Injection-Molded Parts Based on The Modified Complex Method," Polymer-plastics technology and engineering, Vol. 34, No. 5, pp. 793-811, 1995.
Han, B. J., Jung, Y. C., Kim, S. R., Kim, R. W., Kang, M. C., "Forming Characteristics with cavity Pressure and Temperature Signal Inside Mold in High-Pressure Resin Transfer Molding Process of Carbon Fiber Reinforced Composite Material," Journal of the Korean Society of Manufacturing Process Engineers., Vol. 16, No. 6, pp.81-86, 2017.
Kim, K. Y., Kwak, S. H., Park, J. S., Cho, J. H., Lee, C. H., Kang, M. C., "Formability Evaluation of the Vacuum Resin Transfer Molding of a CFRP Composite Automobile Seat Cross Part," Journal of the Korean Society of Manufacturing Process Engineers., Vol. 16, No. 3, pp.24-29, 2017.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.