참고문헌 (12)

1. Choi, H. J., Lee, H. G., "A study on the Design of Drum Type Automatic Tool Changer," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 19, No. 7, pp. 52-59, 2020. 

   원문보기 상세보기

2. Choi, H. J., Park, C. W., Choi, S. D., "Analyses on Deformation Patterns Depending on the Injection Process for Rear Lamp Reflectors of Automotive," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 4, pp. 32-37, 2010. 

3. Choi, H. J., Jang, E. S., Lee, H. G., Cha, U. S., and Jeon, S. H., "Tool Changer Structure Analysis of Drum Type Automatic Tool Changer", Proceedings of the KSMPE Spring Conference, pp. 7, 2019. 

4. Choi, H. J., Cho, H. D., and Lee, Y. C., "A Study on the Design of Drum Type Automatic Tool Changer in Horizontal Machining Center", Proceedings of the KSMPE Autumn Conference, pp. 139, 2018. 

5. Choi, H. J., Kwon, S. W., "ATC Dynamic Analysis of Horizontal 2-Head Machining Center", Proceedings of the KSMPE Autumn Conference, pp. 73, 2017. 

6. Park, J. C., Kim, K. M., "Determination of Gate Position Considering Robustness in Injection Mold Design," Journal of the Korean Society of Manufacturing Process Engineers., Vol. 16, No. 5, pp. 113-118, 2017. 

7. Zhai, M. et al., "Automated Selection of Gate Location for Plastic Injection Molding Processing," Polymer-Plastics Technology and Engineering, Vol. 44, pp. 229-242, 2005. 

   상세보기

8. Yamanoi, M. et al., "Application of Birefringence CAE in Mould Design of Optic Lens Injection Molding Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 1-6, 2012. 

9. Lee, B. H. and Kim, B. H., "Optimization of Part Wall Thicknesses to Reduce Warpage of Injection-Molded Parts Based on The Modified Complex Method," Polymer-plastics technology and engineering, Vol. 34, No. 5, pp. 793-811, 1995. 

   상세보기

10. Han, B. J., Jung, Y. C., Kim, S. R., Kim, R. W., Kang, M. C., "Forming Characteristics with cavity Pressure and Temperature Signal Inside Mold in High-Pressure Resin Transfer Molding Process of Carbon Fiber Reinforced Composite Material," Journal of the Korean Society of Manufacturing Process Engineers., Vol. 16, No. 6, pp.81-86, 2017. 

11. Kim, K. Y., Kwak, S. H., Park, J. S., Cho, J. H., Lee, C. H., Kang, M. C., "Formability Evaluation of the Vacuum Resin Transfer Molding of a CFRP Composite Automobile Seat Cross Part," Journal of the Korean Society of Manufacturing Process Engineers., Vol. 16, No. 3, pp.24-29, 2017. 

12. Kim, H. K., "A study on Injection Molding Analysis of a Plastic Rack Gear," Journal of the Korean Society of Manufacturing Process Engineers., Vol. 19, No. 8, pp.50-55, 2020. 

    원문보기 상세보기

저자의 다른 논문 :

박철우 (7) 최현진 (16)