최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.1, 2021년, pp.66 - 73
정명휘 (경남과학기술대학교 자동차공학과 대학원) , 공정리 (한국폴리텍대학 로봇캠퍼스 로봇기계과) , 김해지 (경남과학기술대학교 자동차공학과)
In this paper, we analyzed and considered the precision of parts produced by 3D printing methods. For the latch systems applied to the Wingline folding doors, the 3D shape of the door hinge part was printed using FDM and DLP methods. Then, the 3D printed shape was scanned to measure the dimensions a...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kim, H. J. and Kim, N. K., "Dimensional Characteristics according to Internal Density of Automotive Inner Ring in 3D Printing", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 11, pp. 196-102, 2019.
Jang, H. Y. and Park, H. S., "An Experimental Investigation of Liquid Slug - Gas Bubble Flow Characteristics in a Micromixer Manufactured by 3D Printing Technique", Transactions of the Korean Society of Mechanical Engineers - B, Vol. 44, No. 5, pp. 325-300, 2020.
Lee, S. M., Kim, Y. H. and Eem, J. K., "Support-generation Method Using the Morphological Image Processing for DLP 3D Printers", The Journal of Korean Institute of Information Technology, Vol. 15, No. 12, pp. 165-171, 2017.
Bucci, A., Celata, G. P., Cumo, M., Serra, E. and Zummo, G., "Water Single-phase Fluid Flow and Heat Transfer in Capillary Tubes", ASME 2003 1st International Conference on Microchannels and Minichannels, pp. 319-326, 2003.
Lee, J. S. and Huh, J. S., "Study of Textile Structure using 3D Printing -focused on the comparison of FDM and DLP-", The Korean Society of Science & Art, Vol. 31, No. 12, pp. 329-340, 2017.
Hwang, S. R., Lee, J. W., Lee, S. H., Hong, D. G. and Park, M. S., "Development of DLP 3D Printer with Multiple Composite Materials", Journal of the Korean Society for Precision Engineering, Vol. 37, No. 5, pp. 381-388, 2020.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.