최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국융합학회논문지 = Journal of the Korea Convergence Society, v.12 no.1, 2021년, pp.185 - 191
손권중 (홍익대학교 기계정보공학과)
A powder metallurgy process with granules is the manufacturing technology that can achieve higher-density sintered parts than conventional powder metallurgy processes. However, there is a disadvantage in that the production cost increases significantly due to the additional granulation step. High gr...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
F. Thummler & R. Oberacker. (1993). An Introduction to Powder Metallurgy. London : The Institute of Materials.
D. Heaney (2019). Handbook of Metal Injection Molding. Cambridge: Woodhead Publishing.
T. Kadomura, Y. Maeta & I. Otsuka. (2006). Development of Granulated Powders by SUS316L Ultra Fine Powder. Proceedings of the 2006 Powder Metallurgy World Congress. (pp. 733-734). Seoul : Korean Powder Metallurgy Institute.
H. Toyoshima, M. Kusunoki & I. Otsuka. (2006). Sintering Properties of High-Pressure Water Atomized SUS 316L Ultra Fine Powder. Proceedings of the 2006 Powder Metallurgy World Congress. (pp. 769-770). Seoul : Korean Powder Metallurgy Institute.
M. Roseane et al. (2017). Production of Nickel Matrix Composites Reinforced with Carbide Particles by Granulation of Fine Powders and Mechanical Pressing. Powder Technology, 305, 673-678. DOI : 10.1016/j.powtec.2016.10.053
J. P. Choi, G. Y. Lee, J. I. Song, W. S. Lee & J. S. Lee. (2015). Sintering Behavior of 316L Stainless Steel Micro-Nanopowder Compact Fabricated by Powder Injection Molding. Powder Technology, 279, 196-202. DOI : 10.1016/j.powtec.2015.04.014
A. D. Salman, M. J. Hounslow & J. P. K. Seville. (2007). Granulation. Amsterdam : Elsevier.
K. J. Son. (2018). A Numerical Study of the Influence of Rheology of Cohesive Particles on Blade Free Planetary Mixing. Korea-Australia Rheology Journal, 30(3), 199-209. DOI : 10.1007/s13367-018-0020-z
K. J. Son. (2019). A Numerical Study of the Influence of Operating Conditions of a Blade Free Planetary Mixer on Blending of Cohesive Powders. Korea-Australia Rheology Journal, 31(1), 15-23. DOI : 10.1007/s13367-019-0002-9
K. J. Son. (2018). A Discrete Element Model for the influence of Surfactants on Sedimentation Characteristics of Magnetorheological Fluids. Korea-Australia Rheology Journal, 30(1), 29-39. DOI : 10.1007/s13367-018-0004-z
K. J. Son. (2020). Performance Evaluation of Multi-Degree-of-Freedom Robotic Mixer using Discrete Element Mixing Simulations. Journal of the Korea Convergence Society, 10(10), 117-122. DOI : 10.15207/JKCS.2020.11.10.219
K. S. Kim. (2019). Simulation of Membrane Sloshing Tank by Using MPS. Journal of the Korea Convergence Society, 11(10), 219-224. DOI : 10.15207/JKCS.2019.10.10.117
L. Fries, S. Antonyuk, S. Heinrich & S. Palzer. (2011). DEM-CFD Modeling of a Fluidized Bed Spray Granulator. Chemical Engineering Science, 66, 2340-2355. DOI : 10.1016/j.ces.2011.02.038
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.