$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

PPO 기반 음이온 교환막 소재 개발 동향
A Review on Development of PPO-based Anion Exchange Membranes 원문보기

멤브레인 = Membrane Journal, v.31 no.6, 2021년, pp.371 - 383  

안성진 (전남대학교 고분자융합소재공학부) ,  김기중 (전남대학교 고분자융합소재공학부) ,  유소미 (전남대학교 고분자융합소재공학부) ,  류건영 (전남대학교 고분자공학과 대학원) ,  지원석 (전남대학교 고분자융합소재공학부)

초록
AI-Helper 아이콘AI-Helper

음이온 교환막은 수소를 생산할 수 있는 수전해와 수소 연료를 사용하여 전기 에너지를 사용할 수 있는 연료전지 시스템에 사용될 수 있다. 음이온 교환막은 알칼라인 조건에서 수산화 이온(OH-) 전도를 기반으로 작동한다. 하지만, 음이온 교환막은 상대적으로 낮은 이온 전도도와 알칼라인 안정성을 보이기 때문에 아직 수전해 및 연료전지에 상용화되는 데 한계가 존재한다. 이를 해결하기 위해서는 고분자 구조를 합리적으로 설계하여 새로운 음이온 교환막 소재를 개발하는 것이 필수적이다. 특히, 고분자의 물성, 이온전도도, 그리고 알칼라인 안정성이 우수하게 유지될 수 있도록 고분자 구조 및 합성 방법 등을 제어하여 한다. 음이온 교환막 중에서 Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) 기반의 소재는 상용화 되어 접근이 용이하다. 또한, 다른 고분자에 비해 상대적으로 기계적인 특성 및 화학적 안정성이 높아 음이온 교환막 개발에 자주 사용되고 있다. 본 총설에서는 음이온 교환막에서 사용되는 PPO 기반의 고분자 소재 개발 전략 및 특성에 대해서 소개하고자 한다.

Abstract AI-Helper 아이콘AI-Helper

Anion exchange membranes have been used for water electrolysis, which can produce hydrogen, and fuel cells, which can generate electrical energy using hydrogen fuel. Anion exchange membranes operate based on hydroxide ion (OH-) conduction under alkaline conditions. However, since the anion exchange ...

주제어

참고문헌 (51)

  1. M. Galizia, W. S. Chi, Z. P. Smith, T. C. Merkel, R. W. Baker, and B. D. Freeman, "50th Anniversary Perspective: Polymers and Mixed Matrix Membranes for Gas and Vapor Separation: A Review and Prospective Opportunities", Macromolecules, 50, 7809 (2017). 

  2. P. E. Brockway, A. Owen, L. I. Brand-Correa, and L. Hardt, "Estimation of global final-stage energy-return-on-investment for fossil fuels with comparison to renewable energy sources", Nat. Energy, 4, 612 (2019). 

  3. A. Hasanbeigi, L. Price, and E. Lin, "Emerging energy-efficiency and CO 2 emission-reduction technologies for cement and concrete production: A technical review", Renew. Sustain. Energy Rev., 16, 6220 (2012). 

  4. N. L. Panwar, S. C. Kaushik, and S. Kothari, "Role of renewable energy sources in environmental protection: A review", Renew. Sustain. Energy Rev., 15, 1513 (2011). 

  5. J. O. Abe, A. P. I. Popoola, E. Ajenifuja, and O. M. Popoola, "Hydrogen energy, economy and storage: Review and recommendation", Int. J. Hydrogen Energy, 44, 15072 (2019). 

  6. U. Eberle, M. Felderhoff, and F. Schuth, "Chemical and physical solutions for hydrogen storage", Angew. Chem. Int. Ed., 48, 6608 (2009). 

  7. W. I. F. David, J. W. Makepeace, S. K. Callear, H. M. A. Hunter, J. D. Taylor, T. J. Wood, and M. O. Jones, "Hydrogen production from ammonia using sodium amide", J. Am. Chem. Soc., 136, 13082 (2014). 

  8. X. Wang, K. Maeda, A. Thomas, K. Takanabe, G. Xin, J. M. Carlsson, K. Domen, and M. Antonietti, "A metal-free polymeric photocatalyst for hydrogen production from water under visible light", Nat. Mater., 8, 76 (2009). 

  9. I. Dincer and C. Acar, "Review and evaluation of hydrogen production methods for better sustainability", Int. J. Hydrogen Energy, 40, 11094 (2015). 

  10. H. F. Abbas and W. M. A. Wan Daud, "Hydrogen production by methane decomposition: A review", Int. J. Hydrogen Energy, 35, 1160 (2010). 

  11. H. A. Miller, K. Bouzek, J. Hnat, S. Loos, C. I. Bernacker, T. Weissgarber, L. Rontzsch, and J. Meier-Haack, "Green hydrogen from anion exchange membrane water electrolysis: A review of recent developments in critical materials and operating conditions", Sustain. Energy Fuels, 4, 2114 (2020). 

  12. K. Zeng and D. Zhang, "Recent progress in alkaline water electrolysis for hydrogen production and applications", Prog. Energy Combust. Sci., 36, 307 (2010). 

  13. S. Noh, J. Y. Jeon, S. Adhikari, Y. S. Kim, and C. Bae, "Molecular Engineering of Hydroxide Conducting Polymers for Anion Exchange Membranes in Electrochemical Energy Conversion Technology", Acc. Chem. Res., 52, 2745 (2019). 

  14. K. S. Im, T. Y. Son, K. Kim, J. F. Kim, and S. Y. Nam, "Research and development trend of electrolyte membrane applicable to water electrolysis system", Appl. Chem. Eng., 30, 389 (2019). 

  15. M. Winter and R. J. Brodd, "What are batteries, fuel cells, and supercapacitors?", Chem. Rev., 104, 4245 (2004). 

  16. J. Peron, A. Mani, X. Zhao, D. Edwards, M. Adachi, T. Soboleva, Z. Shi, Z. Xie, T. Navessin, and S. Holdcroft, "Properties of Nafion® NR-211 membranes for PEMFCs", J. Membr. Sci., 356, 44 (2010). 

  17. X. L. Gao, L. X. Sun, H. Y. Wu, Z. Y. Zhu, N. Xiao, J. H. Chen, Q. Yang, Q. G. Zhang, A. M. Zhu, and Q. L. Liu, "Highly conductive fluorine-based anion exchange membranes with robust alkaline durability", J. Mater. Chem. A, 8, 13065 (2020). 

  18. Z. Zhang, E. Chalkova, M. Fedkin, C. Wang, S. N. Lvov, S. Komarneni, and T. C. M. Chung, "Synthesis and characterization of poly(vinylidene fluoride)-g-sulfonated polystyrene graft copolymers for proton exchange membrane", Macromolecules, 41, 9130 (2008). 

  19. J. R. Varcoe, P. Atanassov, D. R. Dekel, A. M. Herring, M. A. Hickner, P. A. Kohl, A. R. Kucernak, W. E. Mustain, K. Nijmeijer, K. Scott, T. Xu, and L. Zhuang, "Anion-exchange membranes in electrochemical energy systems", Energy Environ. Sci., 7, 3135 (2014). 

  20. G. Merle, M. Wessling, and K. Nijmeijer, "Anion exchange membranes for alkaline fuel cells: A review", J. Membr. Sci., 377. 1 (2011). 

  21. G. Couture, A. Alaaeddine, F. Boschet, and B. Ameduri, "Polymeric materials as anion-exchange membranes for alkaline fuel cells", Prog. Polym. Sci., 36, 1521 (2011). 

  22. J.-H. Kim, S. Ryu, and S.-H. Moon, "The Fabrication of Ion Exchange Membrane and Its Application to Energy Systems", Membr. J., 30, 79 (2020). 

  23. J. Song, B. Seo, and Y. Choi, "Structural Studies in Anion Exchange Membrane Prepared by Vinyl Benzyl Chloride and its Electrochemical Properties", Membr. J., 25, 310 (2015). 

  24. N. Ramaswamy and S. Mukerjee, "Alkaline Anion-Exchange Membrane Fuel Cells: Challenges in Electrocatalysis and Interfacial Charge Transfer", Chem. Rev., 119. 11945 (2019). 

  25. P. Atkins and P. J. De, "Physical Chemistry", 7th Edition, Oxford Univ. Press (2002). 

  26. H. S. Dang and P. Jannasch, "High-Performing Hydroxide Exchange Membranes with Flexible Tetra-Piperidinium Side Chains Linked by Alkyl Spacers", ACS Appl. Energy Mater., 1, 2222 (2018). 

  27. R. A. Becerra-Arciniegas, R. Narducci, G. Ercolani, S. Antonaroli, E. Sgreccia, L. Pasquini, P. Knauth, and M. L. Di Vona, "Alkaline stability of model anion exchange membranes based on poly(phenylene oxide) (PPO) with grafted quaternary ammonium groups: Influence of the functionalization route", Polymer, 185, 121931 (2019). 

  28. J. S. Olsson, T. H. Pham, and P. Jannasch, "Functionalizing Polystyrene with N-Alicyclic PiperidineBased Cations via Friedel-Crafts Alkylation for Highly Alkali-Stable Anion-Exchange Membranes", Macromolecules, 53, 4722 (2020). 

  29. J. Ran, L. Wu, Y. Ru, M. Hu, L. Din, and T. Xu, "Anion exchange membranes (AEMs) based on poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) and its derivatives", Polym. Chem., 6, 5809 (2015). 

  30. J. Ran, L. Wu, B. Wei, Y. Chen, and T. Xu, "Simultaneous Enhancements of Conductivity and Stability for Anion Exchange Membranes (AEMs) through Precise Structure Design", Sci. Rep., 4 (2014). 

  31. G. Yang, J. Hao, J. Cheng, N. Zhang, G. He, F. Zhang, and C. Hao, "Hydroxide ion transfer in anion exchange membrane: A density functional theory study", Int. J. Hydrogen Energy, 41, 6877 (2016). 

  32. M. Mandal, "Recent Advancement on Anion Exchange Membranes for Fuel Cell and Water Electrolysis", ChemElectroChem, 8. 36 (2021). 

  33. N. Li, T. Yan, Z. Li, T. Thurn-Albrecht, and W. H. Binder, "Comb-shaped polymers to enhance hydroxide transport in anion exchange membranes", Energy Environ. Sci., 5, 7888 (2012). 

  34. M. I. Khan, X. Li, J. Fernandez-Garcia, M. H. Lashari, A. Ur Rehman, N. Elboughdiri, L. Kolsi, and D. Ghernaout, "Effect of Different Quaternary Ammonium Groups on the Hydroxide Conductivity and Stability of Anion Exchange Membranes", ACS Omega, 6, 7994 (2021). 

  35. Y. Yang, Y. Xu, N. Ye, D. Zhang, J. Yang, and R. He, "Alkali Resistant Anion Exchange Membranes Based on Saturated Heterocyclic Quaternary Ammonium Cations Functionalized Poly(2,6-dimethyl-1,4-phenylene oxide)s", J. Electrochem. Soc., 165, F350 (2018). 

  36. J. Xue, X. Liu, J. Zhang, Y. Yin, and M. D. Guiver, "Poly(phenylene oxide)s incorporating N-spirocyclic quaternary ammonium cation/cation strings for anion exchange membranes", J. Membr. Sci., 595, 117507 (2020). 

  37. M. G. Marino, and K. D. Kreuer, "Alkaline Stability of Quaternary Ammonium Cations for Alkaline Fuel Cell Membranes and Ionic Liquids", ChemsusChem, 8, 513 (2015). 

  38. J. Pan, J. Han, L. Zhu, and M. A. Hickner, "Cationic Side-Chain Attachment to Poly(Phenylene Oxide) Backbones for Chemically Stable and Conductive Anion Exchange Membranes", Chem. Mater., 29, 5321 (2017). 

  39. H. S. Dang and P. Jannasch, "A comparative study of anion-exchange membranes tethered with different hetero-cycloaliphatic quaternary ammonium hydroxides", J. Mater. Chem. A, 5, 21965 (2017). 

  40. S. He, L. Liu, X. Wang, S. Zhang, M. D. Guiver, and N. Li, "Azide-assisted self-crosslinking of highly ion conductive anion exchange membranes", J. Membr. Sci., 509, 48 (2016). 

  41. N. Chen, C. Long, Y. Li, C. Lu, and H. Zhu, "Ultrastable and High Ion-Conducting Polyelectrolyte Based on Six-Membered N-Spirocyclic Ammonium for Hydroxide Exchange Membrane Fuel Cell Applications", ACS Appl. Mater. Interfaces, 10, 15720 (2018). 

  42. X. Chu, Y. Shi, L. Liu, Y. Huang, and N. Li, "Piperidinium-functionalized anion exchange membranes and their application in alkaline fuel cells and water electrolysis", J. Mater. Chem. A, 7, 7717 (2019). 

  43. X. Chu, L. Liu, Y. Huang, M. D. Guiver, and N. Li, "Practical implementation of bis-six-membered N-cyclic quaternary ammonium cations in advanced anion exchange membranes for fuel cells: Synthesis and durability", J. Membr. Sci., 578, 239 (2019). 

  44. J. Ran, L. Wu, and T. Xu, "Enhancement of hydroxide conduction by self-assembly in anion conductive comb-shaped copolymers", Polym. Chem., 4, 4612 (2013). 

  45. J. Ran, L. Wu, Q. Ge, Y. Chen, and T. Xu, "High performance anion exchange membranes obtained through graft architecture and rational cross-linking", J. Membr. Sci., 470, 229 (2014). 

  46. X. Cheng, J. Wang, Y. Liao, C. Li, and Z. Wei, "Enhanced Conductivity of Anion-Exchange Membrane by Incorporation of Quaternized Cellulose Nanocrystal", ACS Appl. Mater. Interfaces, 10, 23774 (2018). 

  47. H. Long, K. Kim, and B. S. Pivovar, "Hydroxide degradation pathways for substituted trimethylammonium cations: A DFT study", J. Phys. Chem. C, 116, 9419 (2012). 

  48. S. Chempath, J. M. Boncella, L. R. Pratt, N. Henson, and B. S. Pivovar, "Density functional theory study of degradation of tetraalkylammonium hydroxides", J. Phys. Chem. C, 114, 11977 (2010). 

  49. N. Li, M. D. Guiver, and W. H. Binder, "Towards high conductivity in anion-exchange membranes for alkaline fuel cells", ChemSusChem, 6, 1376 (2013). 

  50. T. Y. Son, T. H. Kim, H. J. Kim, and S. Y. Nam, "Problems and solutions of anion exchange membranes for anion exchange membrane fuel cell (AEMFC)", Appl. Chem. Eng., 29, 489 (2018). 

  51. H. J. Mun, J. H. Choi, Y. T. Hong, and B. J. Chang, "The Preparation and Electrochemical Properties of Pore-filled and Polystyrene-based Anion-exchange Membranes Using Poly(ethylene glycol)methyl Ether Methacrylate", Membr. J., 25, 515 (2015). 

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로