$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

복합재 패널에서 유도 탄성파를 이용한 이미지 기반 손상탐지 기법 개발 Part II. 손상크기 추정 알고리즘
Image Based Damage Detection Method for Composite Panel With Guided Elastic Wave Technique Part II. Damage Size Estimation Algorithm 원문보기

한국항공우주학회지 = Journal of the Korean Society for Aeronautical & Space Sciences, v.49 no.1, 2021년, pp.13 - 20  

김창식 (Inha University) ,  전용운 (Korea Aerospace University) ,  박정선 (Korea Aerospace University) ,  조진연 (Inha University)

초록
AI-Helper 아이콘AI-Helper

본 논문에서는 반사된 면적 결과와 반사된 위치 결과를 중첩하고, 가시화된 이미지에서 픽셀의 최대값에 대한 비율로 윤곽선을 추출하여 손상 크기를 추정하는 알고리즘을 제안하였다. 반사된 신호의 면적을 구하기 위해서 누적함수 특성벡터 알고리즘을 사용하였고, 반사된 신호의 위치를 구하기 위해서 신호 상관관계를 이용해서 측정신호로부터 손상 신호를 분리하였다. 그리고 제안한 손상크기 추정 알고리즘을 복합재 평판에서 실험 수행하여 검증하였다. 임의의 위치에서 반복 실험을 수행해서 제안된 알고리즘이 반복에 따른 재현성이 있음을 검증하였고, 손상크기 변화에 따라 손상 크기를 추정하고 분별할 수 있음을 검증하였다.

Abstract AI-Helper 아이콘AI-Helper

In this paper, a new algorithm is proposed to estimate the damage size by combining the reflected area with the reflected position and extracting contours in proportion to the maximum value of pixels from the visible image. The cumulative summation feature vector algorithm is used to obtain the area...

주제어

참고문헌 (16)

  1. Diamanti, K. and Soutis, C., "Structural health monitoring techniques for aircraft composite structures," Progress in Aerospace Sciences, Vol. 46, May 2010, pp. 342-352. 

  2. Guemes, A., Fernadez-Lopez, A., Pozo, A. R. and Sierra-Perez, J., "Structural Health Monitoring for Advanced Composite Structures : A Review," Journal of Composites Science, Vol. 4, No. 13, 2020. 

  3. Cawley, P., "Structural health monitoring : Closing the gap between research and industrial deployment," Structural Health Monitoring, Vol. 17, No. 5, 2018, pp. 1225-1244. 

  4. Abbas, S., Li, F. and Qiu, J., "A Review on SHM Techniques and Current Challenges for Characteristic Investigation of Damage in Composite Material Components of Aviation Industry," Materials Performance and Characterization, Vol. 7, No. 1, 2018, pp. 224-258. 

  5. Moix-Bonet, M., Wierach, P., Loendersloot, R. and Bach, M., "Damage Assessment in Composite Structures Based on Acousto Ultrasonics-Evaluation of Performance," Proceeding of the Final Project Conference, Smart Intelligent Aircraft Structures (SARISTU), May 2015, pp. 617-529. 

  6. Bockenheimer, C. and Speckmann, H., "Validation, Verification and Implementation of SHM at Airbus," 6th International Workshop on Structural Health Monitoring, Stanford, California, USA, 2013. 

  7. Rebillat, M. and Mechbal, N., "Damage localization in geometrically complex aeronautic structures using canonical polyadic decomposition of Lamb wave difference signal tensors," Structural Health Monitoring, Vol. 19, No. 1, 2019. 

  8. Ng., C. T. and Veidt, M., "A Lamb-wavebased technique for damage detection in composite laminates," Smart Materials and Structures, Vol. 18, 2009, p. 074006. 

  9. Qiu, L., Liu, M., Qing, X. and Yuan, S., "A quantitative multidamage monitoring method for large-scale complex composite," Structure Health Monitoring, Vol. 12, No. 3, 2013, pp. 183-196. 

  10. Gorgin, R., Wu, Z., Gao, D. and Wang, Y., "Damage size characterization algorithm for active structural health monitoring using the A0 mode of Lamb waves," Smart Materials and Structures, Vol. 23, 2014, p. 035015. 

  11. Migot, A., Bhuiyan, Y. and Giurgiutiu, V., "Numerical and experimental investigation of damage severity estimation using Lamb wave-based imaging methods," Journal of Intelligent Material Systems and Structures, Vol. 30, No. 4, 2019, pp. 618-635. 

  12. Mei, H., Haider, M. F., Joseph, R., Migot, A. and Giurgiutiu, V., "Recent Advances in Piezoelectric Wafer Active Sensors for Structural Health Monitoring Applications," sensors, Vol. 19, No. 383, 2019. 

  13. Hameed, M. S., Li, Z., Chen, J. and Qi, J., "Lamb Wave Based Multistage Damage Detection Method Using an Active PZT Sensor Network for Large Structures," Sensors, Vol. 19, No. 2010, 2019. 

  14. Eremin, A., Glushkov, E., Glushkova, N. and Lammering, R., "Guided wave time-reversal imaging of macroscopic localized inhomogeneities in anisotropic composites," Structural Health Monitoring, Vol. 18, No. 5, 2019, pp. 1803-1819. 

  15. Ihn, J. B. and Chang, F. K., "Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: Part I. Diagnostics," Smart Materials and Structures, Vol. 13, 2004, pp. 609-620. 

  16. Kim, C., Jeon, Y., Park, J. and Cho, J. Y., "Image Based Damage Detection Method for Composite Panel with Guided Elastic Wave Technique, Part I. Damage Localization Algorithm," Journal of The Korean Society for Aeronautical and Space Sciences, Vol. 49, No. 1, 2021, pp. 1-12. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로