최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.34 no.1, 2021년, pp.47 - 50
박성연 (Department of Mechanical Engineering, KAIST) , 온승윤 (Department of Mechanical Engineering, KAIST) , 김성수 (Department of Mechanical Engineering, KAIST)
In this paper, the Curing process for Epoxy Molding Compound (EMC) Package was developed by comparing the performance of the EMC/Cu Bi-layer package manufactured by the conventional Hot Press process system and Carbon Nanotubes (CNT) Heater process system of the surface heating system. The viscosity...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Lu, D., and Wong, C.P. (Eds.), "Materials for Advanced Packaging", Vol. 181, New York: Springer, 2009.
Li, Y., and Goyal, D. (Eds.), "3D Microelectronic Packaging: from Fundamentals to Applications", Vol. 57, Springer, 2017.
Centea, T., and Nutt, S.R., "Manufacturing Cost Relationships for Vacuum Bag-only Prepreg Processing", Journal of Composite Materials, Vol. 50, No. 17, 2016, pp. 2305-2321.
Witik, R.A., Gaille, F., Teuscher, R., Ringwald, H., Michaud, V., and Manson, J.-A.E., "Economic and Environmental Assessment of Alternative Production Methods for Composite Aircraft Components", Journal of Cleaner Production, Vol. 29, 2012, pp. 91-102.
Monaghan, P.F., and Brogan, M.T., "An Overview of Heat Transfer for Processing Thermoplastic Composites in Autoclaves", Proc Flow Processes in Composites Materials Conference. 1991.
Chien, A.T., Cho, S., Joshi, Y., and Kumar, S., "Electrical Conductivity and Joule heating of Polyacrylonitrile/Carbon Nano-tube Composite Fibers", Polymer, Vol. 55, No. 26, 2014, pp. 6896-6905.
Mohiuddin, M., and Hoa, S.V., "Temperature Dependent Electrical Conductivity of CNT-PEEK Composites", Composites Science and Technology, Vol. 72, No. 1, 2011, pp. 21-27.
Lee, J., Ni, X., Daso, F., Xiao, X., King, D., Gomez, J.S., Varela, T.B., Kessler, S.S., and Wardle, B.L., "Advanced Carbon Fiber Composite Out-of-autoclave Laminate Manufacture via Nano-structured Out-of-oven Conductive Curing", Composites Science and Technology, Vol. 166, 2018, pp. 150-159.
Tsai, M.Y., Ting, C.W., Huang, C.Y., and Lai, Y.S., "Determination of Residual Strains of the EMC in PBGA during Manufacturing and IR Solder Reflow Processes", Microelectronics Reliability, Vol. 51, No. 3, 2011, pp. 642-648.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.