다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.3, 2021년, pp.122 - 128
최성윤 (경남대학교 대학원 첨단공학과) , 왕준형 (한국전기연구원 공정혁신시뮬레이션센터) , 왕덕현 (경남대학교 기계공학부)
AI-Helper
Machining operations require removal of chips to keep the coolant clean and fresh throughout the operation time. In this study, microchip removal equipment was developed using AutoCAD and CATIA programs for 3D modeling and 2D draft. In addition, the flow analysis and electromagnetic field analysis o...
Kim, J. S., Lee, D. S., Wang, D. H., "Development of Coolant/Waste-oil Separating and Cooling System with Chip Treatment", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16 No. 3, pp. 16-23, 2017.
Choi, S. Y., Kwon, D. G., "A Study of the Effectives for Surface Roughness by Cutting Angle and Cutting Fluid", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17 No. 1, pp. 57-62, 2018.
Sin, C. H., Jang J. G., "Effect of chemical treatment and variations of the physical properties of waste water-soluble cutting oil", Journal of Environmental Science International, Vol. 13, No. 4, pp. 403-412, 2004.
Lee, H. C., Kim, G. D., "A Study on the Discrimination of the Overhead Stirrer Impeller using the Dimensions of Permanent Magnets", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18 No. 2, pp. 52-57, 2019.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.