최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Elastomers and composites = 엘라스토머 및 콤포지트, v.56 no.1, 2021년, pp.6 - 11
Chung, Kyungho (Department of Polymer Engineering, The University of Suwon)
In order to develop an ultra-high-density elastomeric material for substitution of steel dynamic dampers, a new curing system and technique for high-loading of the filler were examined in this study. Mechanochemical modification of chloroprene rubber (MAH-g-CR) using an internal mixer was carried ou...
A. N. Gent, "Engineering with Rubber", 2nd ed., p. 15, 90, Hanser Publisher, New York, 2000.
A. Ciesielski, "An Introduction to Rubber Technology", 1st ed., p. 133, 87, Rapra Technology Limited, Shropshire, 1999.
N. Lasowicz and R. Jankowski, "Investigation of behavior of metal structures with polymer dampers under dynamic loads", Procedia Engineering, 199, 2832 (2017).
V. Cu, B. Han, and D. Pham, "Tuned mass-high damping rubber damper on a taut cable", J. Civ. Eng., 21, 928 (2017).
J. Jancar, "Influence of Filler Particle Shape on Elastic Moduli of Polypropylene(PP)/Calcium Carbonate and PP/Magnesium Hydroxide Composites", J. Mater. Sci., 24, 3947 (1989).
K. Nagdi, "Rubber as an Engineering Materials: Guide Line for Users", 1st ed., p112, Hanser Publisher, Munich, 1993.
B. B. Boonstra, "Effect of Carbon Black Dispersion on the Mechanical Properties of Rubber Vulcanizates", Rubber Chem. Technol., 36, 115 (1963).
S. Ahmed and F. R. Jones, "A Review of Particulate Reinforcement Theories for Polymer Composites", J. Mater. Sci., 25, 4933 (1990).
K. Chung, D. Lee, K. Yang, W. Lee, and C. Hong, "Surface Modification of Matrix and Filler for Ultra High Density Elastomeric Material", Elastomer, 40, 93 (2005).
J. P. Deng and W. T. Yang, "Self-Initiating Performance of Maleic Anhydride on Surface Photo-grafting Polymerization", J. Polym. Sci., 39, 3246 (2001).
A. Oromiehie, H. Ebadi-Dehaghani, and S. Mirbagheri, "Chemical Modification of Polypropylene by Maleic Anhydride", International J. Chem. Eng. Appl., 5, 117 (2014).
Y. Zhao, C. Ma, S. Cheng, W. Xu, Y. Du, Y. Bao, and Z. Xiao, "Maleic Anhydride-Grafted Isotactic Polybutene-1 and Modified Polyamide 6", Polymers, 10, 872 (2018).
N. Braga, H. Zaggo, T. Montanheiro, and F. Passador, "Preparation of Maleic Anhydride Grafted Poly(trimethylene terephthalate) by Reactive Extrusion Processing", J. Manuf. Mater. Process, 3, 37 (2019).
C. Nakason and A. Kaesman, "The Grafting of MAH Anhydride onto Natural Rubber", Polym. Testing, 23, 35 (2004).
P. Zhang, G. Huang, L. Qu, and Y. Nie, "Study on the self-crosslinking behavior based on polychloroprene rubber and epoxidized natural rubber", J. Appl. Polym. Sci., 125, 1084 (2012).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.