최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Elastomers and composites = 엘라스토머 및 콤포지트, v.56 no.1, 2021년, pp.20 - 31
Kim, Il Jin (Global Quality Management Team, Hankooktire & Technology Co., Ltd HQ) , Kim, Donghyuk (Department of Chemical Engineering, Pusan National University) , Ahn, Byungkyu (Wet Braking Innovation TFT, Hankooktire & Technology Co., Ltd R&D Center) , Lee, Hyung Jae (Global Quality Management Team, Hankooktire & Technology Co., Ltd HQ) , Kim, Hak Joo (Global Quality Management Team, Hankooktire & Technology Co., Ltd HQ) , Kim, Wonho (Department of Chemical Engineering, Pusan National University)
There is an increasing demand for the rolling resistance reduction in truck bus radial (TBR) tires in the tire industry. In TBR tires, natural rubber is used as a base polymer to prevent wear and satisfy required physical properties (cut and chip). A binary filler system (silica and carbon black) is...
A. N. Gent, J. E. Mark, and F. R. Eirich, "Science and technology of rubber", ed. Eirich FR, Academic Press, New York, 1978.
L. A. Walker and W. F. Helt III, "High-temperature curing of radial passenger tires", Rubber Chem. Technol., 59, 285 (1986).
W. Hofmann, "Vulcanization and Vulcanizing Agent", London: Maclaren, 371 (1967).
R. L. Fan, Y. Zhang, F. Li, and Y. X. Zhang, "Effect of high-temperature curing on the crosslink structures and dynamic mechanical properties of gum and N330-filled natural rubber vulcanizates", Polym. Test., 20, 925 (2001).
S. S. Sarkawi, K. D. Wilma, and J. W. Noordermeer, "Morphology of silica-reinforced natural rubber: the effect of silane coupling agent", Rubber Chem. Technol., 88, 359 (2015).
B. Rodgers, "Tire Engineering: An Introduction", CRC Press, 2020.
S. Han, W. S. Kim, D. Y. Mun, B. Ahn, and W. Kim, "Effect of coupling agents on the vulcanizate structure of carbon black filled natural rubber", Compos. Interfaces, 27, 355 (2020).
E. M. Cichomski, "Silica-silane reinforced passenger car tire treads: effect of silica morphology, silica-polymer interface structure and rubber matrix network on tire-performance indicators", Ph. D. Thesis, University of Twente, (2015).
Y. C. Jung, "Mixed use of carbon black and silica", Elast. Compo., 20, 229 (1985).
S. Wolff, "Chemical aspects of rubber reinforcement by fillers", Rubber Chem. Technol., 69, 325 (1996).
N. Rattanasom, T. A. Saowapark, and C. Deeprasertkul, "Reinforcement of natural rubber with silica/carbon black hybrid filler", Polym. Test., 26, 369 (2007).
M. J. Wang, Y. Kutsovsky, P. Zhang, L. J. Murphy, S. Laube, and K. Mahmud, "New generation carbon-silica dual phase filler part I. Characterization and application to passenger tire", Rubber. Chem. Technol., 75, 247 (2002).
B. Ahn, J. Y. Lee, D. Kim, I. J. Kim, S. Han, and W. Kim, "Effects of silane agents and curing temperatures on vulcanizate structures", Rubber Chem. Technol., 93, 414 (2020).
N. J. Morrison and M. Porter, "Temperature effects on the stability of intermediates and crosslinks in sulfur vulcanization", Rubber Chem. Technol., 57, 63 (1984).
S. S. Choi, "Influence of rubber composition on change of crosslink density of rubber vulcanizates with EV cure system by thermal aging", J. Appl. Polym. Sci., 75, 1378 (2000).
P. K. Pal, A. K. Bhowmick, and S. K. De, "The effects of carbon black-vulcanization system interactions on natural rubber network structures and properties", Rubber Chem. Technol., 55, 23 (1982).
E. Cichomski, W. K. Dierkes, J. W. Noordermeer, S. M. Schultz, T. V. Tolpekina, L. A. E. M. Reuvekamp, and A. Blume, "Effect of the crosslink density and sulfur-length on wet-traction and rolling resistance performance indicators for passenger car tire tread materials", In 188th Technical Meeting of Rubber Division, ACS, pp. 13-15, 2015.
R. Mukhopadhyay, S. K. De, and S. N. Chakraborty, "Effect of vulcanization temperature and vulcanization systems on the structure and properties of natural rubber vulcanizates", Polymer, 18, 1243 (1977).
C. T. Loo, "High temperature vulcanization of elastomers: 2. Network structures in conventional sulphenamide-sulphur natural rubber vulcanizates", Polymer, 15, 357 (1974).
P. J. Flory and J. Rehner Jr, "Statistical mechanics of crosslinked polymer networks I. Rubberlike elasticity", J. Chem. Phys., 11, 512 (1943).
P. J. Flory, "Statistical mechanics of swelling of network structures", J. Chem. Phys., 18, 108 (1950).
G. Kraus, "Swelling of fillerreinforced vulcanizates", J. Appl. Polym., 7, 861 (1963).
B. B. Boonstra and G. L. Taylor, "Swelling of filled rubber vulcanizates", Rubber Chem. Technol., 38, 943 (1965).
J. Y. Lee, B. Ahn, W. Kim, H. Moon, H. J. Paik, and W. Kim, "The effect of accelerator contents on the vulcanizate structures of SSBR/silica vulcanizates", Compos. Interfaces, 24, 563 (2017).
J. Y. Lee, N. Park, S. Lim, B. Ahn, W. Kim, H. Moon, and W. Kim, "Influence of the silanes on the crosslink density and crosslink structure of silica-filled solution styrene butadiene rubber compounds", Compos. Interfaces, 24, 711 (2017).
N. Park, B. Ahn, J. Y. Lee, W. Kim, H. Moon, and W. Kim "Effect of organosilane agents on the vulcanizate structure and physical properties of silica-filled solution styrene butadiene rubber compounds", Compos. Interfaces, 25, 259 (2018).
B. Ahn, D. Kim, K. Kim, I. J. Kim, H. J. Kim, C. H. Kang, and W. Kim, "Effect of the functional group of silanes on the modification of silica surface and the physical properties of solution styrene-butadiene rubber/silica composites", Compos. Interfaces, 26, 585 (2019).
B. Ahn, N. Park, D. Kim, and W. Kim, "Influence of end-functionalized solution styrene-butadiene rubber on silica-filled vulcanizates with various silica-silane systems", Rubber Chem. Technol., 92, 364 (2019).
I. J. Kim, B. Ahn, D. Kim, H. J. Lee, H. J. Kim, and W. Kim, "Vulcanizate structures and mechanical properties of rubber compounds with silica and carbon black binary filler systems", Rubber Chem. Technol., 93, https://doi.org/10.5254/rct.20.80368 (2020).
I. J. Kim, B. Ahn, D. Kim, H. J. Lee, H. J. Kim, and W. Kim, "Vulcanizate structures of SBR compounds with silica and carbon black binary filler systems at different curing temperatures", Polymers, 12, 2343 (2020).
S. Wolff, M. J. Wang, and E. H. Tan, "Filler-elastomer interactions. X: The effect of filler-elastomer and filler-filler interaction on rubber reinforcement", Kautschuk und Gummi, Kunststoffe, 47, 102 (1994).
Y. Fukahori, "Generalized concept of the reinforcement of elastomers. Part 1: Carbon black reinforcement of rubbers", Rubber Chem. Technol., 80, 701 (2007).
H. Dorrie, C. Schroder, and B. Wies, "Winter tires: operating conditions, tire characteristics and vehicle driving behavior", Tire Science and Technology, 38, 119 (2010).
G. Della Vecchia, "Performance resins in tread formulations-optimizing wet, winter, wear", Tire Technology EXPO 2019, Hannover, Germany, 5-7 March 2019.
A. G. Veith, "Rubber vs. countersurface frictional behaviour: How this influences the traction of pneumatic tyres", Progress in Rubber and Plastics Technology, 14, 1 (1998).
C. F. Derham, R. Newell, and P. M. Swift, "The use of silica for improving tread grip in winter tyres", NR Technology, 19, HS-040 650 (1988).
X. Liu, S. Zhao, X. Zhang, X. Li, and Y. Bai, "Preparation, structure, and properties of solution-polymerized styrenebutadiene rubber with functionalized end-groups and its silica-filled composites", Polymer, 55, 1964 (2014).
J. Han, X. Zhang, and W. Guo, "Effect of modified carbon black on the filler-elastomer interaction and dynamic mechanical properties of SBR vulcanizates", J. Appl. Polym. Sci., 100, 3707 (2006).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.