최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Elastomers and composites = 엘라스토머 및 콤포지트, v.56 no.1, 2021년, pp.32 - 42
Han, Sangwook (Precedent Research Business Sector, Future Technology Research Institute) , Kim, Donghyuk (School of Chemical Engineering, Pusan National University) , Kim, Seongrae (Precedent Research Business Sector, Future Technology Research Institute) , Kim, Jongmyoung (Precedent Research Business Sector, Future Technology Research Institute) , Mun, Dalyong (Precedent Research Business Sector, Future Technology Research Institute) , Morita, Koichi (Precedent Research Business Sector, Future Technology Research Institute) , Kim, Wonho (Precedent Research Business Sector, Future Technology Research Institute)
The vulcanizate structure of silica-filled compounds is affected by the filler-rubber interaction (FRI) due to the silica-rubber coupling reaction and the chemical crosslink density (CCD) of the matrix rubber. In this study, the vulcanizate structure changes of silica-filled compounds according to t...
S. Maghami, "Silica-filled tire tread compounds: an investigation into the viscoelastic properties of the rubber compounds and their relation to tire performance", PhD Thesis, University of Twente, the Netherlands, (2016).
E. P. Rauline, "Rubber compound and tires based on such a compound", Patent 0501227A1 (1992).
R. Rauline, "Copolymer rubber composition with silica filler, tires having a base of said composition and method of preparing same", U.S. Patent No. 5227425 (1993).
A. Bertora, M. Castellano, E. Marsano, M. Alessi, L. Conzatti, P. Stagnaro, and A. Turturro, "A new modifier for silica in reinforcing SBR elastomers for the tyre industry", Macromol. Mater. Eng., 296, 455 (2011).
S. Wolff, "Chemical aspects of rubber reinforcement by fillers", Rubber Chem. Technol., 69, 325 (1996).
A. S. Hashim, B. Azahari, Y. Ikeda, and S. Kohjiya, "The effect of bis (3-triethoxysilylpropyl) tetrasulfide on silica reinforcement of styrene-butadiene rubber", Rubber Chem. Technol., 71, 289 (1998).
S. Han, B. Gu, S. Kim, S. Kim, D. Mun, K. Morita, and W. Kim, "Effect of sulfur variation on the vulcanizate structure of silica-filled styrene-butadiene rubber compounds with a sulfide-silane coupling agent", Polymers, 12, 2815 (2020).
J. Y. Lee, B. Ahn, W. Kim, H. Moon, H. J. Paik, and W. Kim, "The effect of accelerator contents on the vulcanizate structures of SSBR/silica vulcanizates", Compos. Interfaces, 24, 563 (2017).
B. Ahn, N. Park, D. Kim, and W. Kim, "Influence of end-functionalized solution styrene-butadiene rubber on silica-filled vulcanizates with various silica-silane systems", Rubber Chem. Technol., 92, 364 (2019).
B. Ahn, D. Kim, K. Kim, I. J. Kim, H. J. Kim, C. H. Kang, and W. Kim, "Effect of the functional group of silanes on the modification of silica surface and the physical properties of solution styrene-butadiene rubber/silica composites", Compos. Interfaces, 26, 585 (2019).
H. Mun, K. Hwang, and W. Kim, "Synthesis of emulsion styrene butadiene rubber by reversible addition-fragmentation chain transfer polymerization and its properties", J. Appl. Polym. Sci., 136, 47069 (2019).
N. Park, B. Ahn, J. Y. Lee, W. Kim, H. Moon, and W. Kim, "Effect of organosilane agents on the vulcanizate structure and physical properties of silica-filled solution styrene butadiene rubber compounds", Compos. Interfaces, 25, 259 (2018).
S. Han, W. S. Kim, D. Y. Mun, B. Ahn, and W. Kim, "Effect of coupling agents on the vulcanizate structure of carbon black filled natural rubber", Composite Interfaces, 27, 355 (2020).
I. J. Kim, B. Ahn, D. Kim, H. J. Lee, H. J. Kim, and W. Kim, "Vulcanizate structures and mechanical properties of rubber compounds with silica and carbon black binary filler systems", Rubber Chem. Technol., 93, https://doi.org/10.5254/rct.20.80368 (2020).
I. J. Kim, B. Ahn, D. Kim, H. J. Lee, H. J. Kim, and W. Kim, "Vulcanizate structures of SBR compounds with silica and carbon black binary filler systems at different curing temperatures", Polymers, 12, 2343 (2020).
M. J. Wang, "Effect of polymer-filler and filler-filler interactions on dynamic properties of filled vulcanizates", Rubber Chem Technol., 71, 520 (1998).
L. Qu, G. Yu, X. Xie, L. Wang, J. Li, and Q. Zhao, "Effect of silane coupling agent on filler and rubber interaction of silica reinforced solution styrene butadiene rubber", Polym. Compos., 34, 1575 (2013).
A. Hasse, O. Klockmann, A. Wehmeier, and H. D. Luginsland, "Influence of the amount of di- and polysulfane silanes on the crosslinking density of silica-filled rubber compounds", Kautschuk und Gummi Kunststoffe., 55, 236 (2002).
M. J. Wang, S. Wolff, and J. B. Donnet, "Filler-elastomer interactions. Part I: Silica surface energies and interactions with model compounds", Rubber Chem Technol., 64, 559 (1991).
O. Klockmann and A. Hasse, "A new rubber silane for future requirements: Lower rolling resistance; Lower VOCs", Kautschuk, Gummi, Kunststoffe, 60, 82 (2007).
S. E. Meyer, W. Schwarze, F. Thurn, and R. Michel, "Sulfur containing organosilicon compounds", U.S. Patent 3842111 (1974).
K. Kim, J. Y. Lee, B. J. Choi, B. Seo, G. H. Kwag, H. J. Paik, and W. Kim, "Styrene-butadiene-glycidyl methacrylate terpolymer/silica composites: dispersion of silica particles and dynamic mechanical properties", Composite Interfaces, 21, 685 (2014).
K.; Kim, B.; Seo, J. Y. Lee, B. J. Choi, G. H. Kwag, H. J. Paik, and W. Kim, "Reduced filler flocculation in the silica-filled styrene-butadiene-glycidyl methacrylate terpolymer", Composite Interfaces, 22, 137 (2015).
U. Gorl, J. Munzenberg, D. Luginsland, and A. Muller, "Investigations on the reaction silica/organosilane and organosilane/polymer-Part 4: Studies on the chemistry of the silane sulfur chain", Kautschuk und Gummi Kunststoffe, 52, 588 (1999).
S. Mihara, R. N. Datta, and J. W. M. Noordermeer, "Flocculation in silica reinforced rubber compounds", Rubber Chem. Technol., 82, 524 (2009).
W. Kaewsakul, K. Sahakaro, W. K. Dierkes, and J. W. M. Noordermeer, "Optimization of mixing conditions for silica-reinforced natural rubber tire tread compounds", Rubber Chem. and Technol., 85, 277 (2012).
W. Kaewsakul, K. Sahakaro, W. K. Dierkes, and J. W. M. Noordermeer, "Cooperative effects of epoxide functional groups on natural rubber and silane coupling agents on reinforcing efficiency of silica", Rubber Chem. Technol., 87, 291 (2014).
S. C. Debnath, R. N. Datta, and J. W. M. Noordermeer, "Understanding the chemistry of the rubber/silane reaction for silica reinforcement, using model olefins", Rubber Chem. Technol., 76, 1311 (2003).
H. D. Luginsland, "Reactivity of the sulfur chains of the tetrasulfane silane Si 69 and the disulfane silane TESPD", Kautschuk und Gummi Kunststoffe, 53, 10 (2000).
P. J. Flory, "Statistical mechanics of swelling of network structures", J. Chem. Phys., 18, 108 (1950).
G. Kraus, "Degree of cure in filler-reinforced vulcanizates by the swelling method", Rubber Chem. Technol., 30, 928 (1957).
S. S. Sarkawi, W. K. Dierkes, and J. W. M. Noordermeer, "Elucidation of filler-to-filler and filler-to-rubber interactions in silica-reinforced natural rubber by TEM Network Visualization", European Polymer Journal, 54, 118 (2014).
A. R. Payne and R. E. Whittaker, "Low strain dynamic properties of filled rubbers", Rubber Chem. Technol., 44, 440 (1971).
S. J. Blanksby and G. B. Ellison, "Bond dissociation energies of organic molecules", Accounts of Chemical Research, 36, 255 (2003).
S. S. Choi, "Bond dissociation of sulfur crosslinks in IR and BR vulcanizates using semi-empirical calculations", Korea Polymer Journal, 5, 39 (1997).
M. T. Ramesan, "The effects of filler content on cure and mechanical properties of dichlorocarbene modified styrene butadiene rubber/carbon black composites", J. Polym. Research, 11, 333 (2005).
W. H. Waddell and L. R. Evans, "Use of nonblack fillers in tire compounds", Rubber Chem. Technol., 69, 377 (1996).
K. Suchiva, C. Sirisinha, P. Sae-oui, and P. Thapthong, "Development of tyre tread compounds for good wet-grip: effects of rubber type", IOP Conference Series. Mater. Sci. Eng., 526 (2019).
H. W. Kummer, "Unified theory of rubber and tire friction. Eng. Research Bulletin B-94", pp. 100-101, Pennsylvania State University, 1966.
D. Woodward, P. Millar, C. Lantieri, C. Sangiorgi, and V. Vignali, "The wear of Stone Mastic Asphalt due to slow speed high stress simulated laboratory trafficking", Constr. Build. Mater., 110, 270 (2016).
A. Dunford, "Friction and the texture of aggregate particles used in the road surface course", PhD Thesis, University of Nottingham, United Kingdom (2013).
D. N. Little and A. Bhasin, "Using Surface Energy Measurements to Select Materials for Asphalt Pavement", No. NCHRP Project 9-37, 2006.
J. Berg, Interfaces and Colloids; World Scientific: Hackensack, NJ, USA, 2010; pp. 250-268.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.