최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.15 no.1, 2021년, pp.66 - 71
In this study, die turning injection(DTI) mold design for manufacturing reservoir fluid tanks used for cooling in-vehicle batteries, inverters, and motors was conducted based on multi-field CAE. Part design, performance evaluation, and mold design of the reservoir fluid tank was performed. The frequ...
A. Patila, A. Patela, and R. Purohit, "An overview of Polymeric Materials for Automotive Applications", Materialstoday: Proceedings, Vol. 4, Issue 2, Part A, pp. 3807-3815, 2017.
L. N. Shafigullin, G. .F Muhametzjanova, A. A. Muhamatdinova, A. M. Sotnikov, and G. R. Shafugullina, "Usage of polymeric fuel tanks in the automotive industry", IOP Conf. Series: Materials Science and Engineering 412, pp. 1-3, 2018.
S. J. A. Rizvi, "Effect of injection molding parameters on crystallinity and mechanical properties of isotactic polypropylene", International Journal of Plastics Technology, Vol. 21, pp. 404-426, 2017.
M. Kurt, O. S. Kamber, Y. Kaynak, G. Atakok, and O. Girit, "Experimental investigation of plastic injection molding: Assessment of the effects of cavity pressure and mold temperature on the quality of the final products", Materials & Design, Vol. 30, No. 8, pp. 3217-3224, 2009.
W. R. Jong, S. S. Hwang, C. C. Wu, C. H. Kao, Y. M. Huang, and M.-C. Tsai, "Using a Visualization Mold to Discuss the Influence of Gas Counter Pressure and Mold Temperature on the Fountain Flow Effect", Intern. Polymer Processing Vol. 33, No. 2, pp. 255-267, 2018.
T. K. Nguyen, C. J. Hwang, and B. K. Lee, "Numerical investigation of warpage in insert injection-molded lightweight hybrid products", Int. J. of Precision Engineering and Manufacturing, Vol. 18, pp. 187-195, 2017.
H. J. Lee, B. D. Jooa, Y. B. Moon, C. J. Van Tynec, and Y. H. Moon, "The die turning injection (DTI) process for the fabrication of hollow parts", Journal of Materials Processing Technology, Vol. 212, pp. 808-816, 2012.
G. J. Bex, W. Six, B. Laing, J. D. Keyzer, F. Desplentere, and A. V. Bael, "Effect of process parameters on the adhesion strength in two component injection molding of thermoset rubbers and thermoplastics", Inc. J. Appl. Polym. Sci., Vol. 135, Issue 29, pp. 1-8, 2018.
Y. Murata, T. Nakanishi, N. Hirai, F. Kawanishi, and H. Ibuki, "Development of Mold for Demolding Resistance Measurement in Polymer Injection Molding", Sensors and Materials, Vol. 31, No. 10. pp. 3099-3110, 2019.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.