최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기지질공학 = The journal of engineering geology, v.31 no.1, 2021년, pp.67 - 81
서혁 (조선대학교 토목공학과) , 정수근 (조선대학교 토목공학과) , 김대현 (조선대학교 토목공학과)
Grouting is used for reinforcement and waterproofing of soft ground to increase its bearing capacity, reduce the impacts of rising or lowering groundwater levels, and reduce subsidence due to vibration and general causes. This study investigated the enhancement of grout strength and hardening time b...
ACI Committee 440, 2017, Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures (ACI 440.2R-17), American Concrete Institute, 110.
ASTM D3039, 2007, Standard test method for tensile properties of polymer matrix composite materials, American Society for Testing Materials (ASTM International), 13.
Banthia, N., Sappakittipakorn, M., 2007, Toughness enhancement in steel fiber reinforced concrete through fiber hybridization, Cement and Concrete Research, 37(9), 1366-1372.
Bernal, S.A., Mejia de, G.R., Provis, J.L., 2012, Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends, Construction Building Materials, 33, 99-108.
Brameshuber, W., 2006, Textile reinforced concrete, State-of-the-Art Report of RILEM Technical Committee 201-TRC, RILEM Publications, Bagneux, France.
Choi, J.J., Lee, T.H., Park, B.J., Rho, K.G., Choi, S.M., 2019, Experimental study of seismic performance improvement of pilotis RC column strengthened with FRP, Journal of the Korean Society for Advanced Composite Structures, 10(1), 17-25 (in Korean with English abstract).
Choi, Y.S., 2016, An experimental study on the engineering properties of self-healing eco-friendly grout material, Docter Thesis, Myongji University, 1-110.
Gao, J., Sun, W., Morino, K., 1997, Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete, Cement and Concrete Composites, 19(4), 307-313.
Guerrieri, M., Sanjayan, J.G., 2009, Behavior of combined fly ash/slag-based geopolymers when exposed to high temperatures, Fire and Materials, 34(4), 163-175.
Han, C.G., Kim, S.H, Son, H.J., 2009, Engineering characteristics analysis of high strength concrete followed in replacement ratio increase in blast furnace slag, Journal of the Korean Recycled Construction Resources Institute, 4(3), 62-68 (in Korean with English abstract).
Hur, J.H., Kim, J.H., Park, W.G.I., Kim, K.H., 2013, Seismic performance of seismic retrofitted column by various type of FRP, Journal of the Korean Society for Railway, 2013(5), 1378-1383.
Hyeon, H.J., 2017, An experimental study on the properties of the cementless lightweight aerated concrete with blast furnace slag, Master Thesis, Konkuk University, 1-46.
Jang, H.O., Ji, N.O., 2013, An experimental study on the mixing of normal strength and high fluidity concrete using ground granulated blast furnace slag, Journal of the Architectural Institute of Korea Structure & Construction, 29(6), 81-88 (in Korean with English abstract).
Jeong, J.Y., Jang, S.Y., Choi, Y.C., Jung, S.H., Kim, S.I., 2015, Effects of replacement ratio and fineness of GGBFS on the hydration and pozzolanic reaction of high-strength high-volume GGBFS blended cement pastes, Journal of the Korea Concrete Institute, 27(2), 115-125 (in Korean with English abstract).
Jo, S.G., 2013, An experimental study on the workability and engineering properties of concrete using ground granulated blast furnace slag, The Society of Convergence Knowledge Transactions, 1(1), 43-50 (in Korean with English abstract).
Kang, S.T., Choi, J.I., Koh, K.T., Lee, K.S., Lee, B.Y., 2016, Hybrid effects of steel fiber and microfiber on the tensile behavior of ultra-high performance concrete, Composite Structures, 145, 37-42.
Kim, H.C., 2017, A Study on the development of a grouting material containing blast furnace slag and carbon fiber, Doctor Thesis, Chosun University, 1-102.
Kim, W.K., 2012, Current states and prospect of utilization of blast furnace slag, Korean Institute of Architecture, 56(8), 14-17.
Kim, Y.H., Han, C.G., Lee, H.J., 2013, Effect of recycled fine aggregate powder and OPC on the strength gain properties of mortar using blast furnace slag powder and natural aggregates, Journal of the Architectural Institute of Korea Structure & Construction, 29(3), 81-88 (in Korean with English abstract).
Kim, Y.W., 2010, Containing aramid fiber reinforced concrete research, Master Thesis, Kyungpook National University, 1-45.
Lee, C.H., Eo, S.H., 2020, Compressive strength and durability evaluation by freezing and thawing test of repaired reinforced concrete columns, Journal of the Korea Contents Association, 20(12), 529-536 (in Korean with English abstract).
Marjanovic, N., Komljenovic, M., Bascarevic, Z., Nikolic, V., Petrovic, R., 2015, Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends, Ceramic International, 41(1), 1421-1435.
Mechtcherine, V., 2013, Novel cement-based composites for the strengthening and repair of concrete structures, Construction and Building Materials, 41, 365-373.
Nam, J.S., Ryu, J.C., Kim, K.Y., Kim, H.S., Jeon, J.K., 2014, Improvement of the strength properties and impact resistance of the cement composite materials by the use of surface modification of the aramid fibers, Journal of the Korea Institute for Structural Maintenance and Inspection, 19(1), 100-108 (in Korean with English abstract).
Nath, S.K., Kumar, S., 2013, Influence of iron making slags on strength and microstructure of fly ash geopolymer, Construction Building Materials, 38, 924-930.
Oh, J.E., Monteiro, P.J.M., Jun, S.S., Choi, S., Clark, S.M., 2010, The evolution of strength and crystalline phases for alkali-activated ground blast furnace slag and fly ash based geopolymers, Cement Concrete Research, 40(2), 189-196.
Park, K.H., 2015, Evaluation of applicability of environment friendly biogrouting methods in loose frictional soils, Doctor Thesis, Chosun University, 1-167.
Park, T.B., 2017, Physio-chemical characteristics of slag based zero-cement grout, Master Thesis, Myongji University, 1-45.
Romualdi, J.P., Batson, G.B., 1963, Mechanics of crack arrest in concrete, Journal of the Engineering Mechanics Division, 89(3), 147-168.
Seo, M.G., Park, S.J., 2010, Manufacturing method of carbon fibers and their application fields, Polymer Science and Technology, 21(2), 130-140.
Shah, S.P., 1984, Fiber reinforced concrete, Handbook of Structural Concrete, 1, 1-14.
Shah, S.P., Rangan, B.V., 1971, Fiber reinforced concrete properties, ACI Journal, 68(2), 126-135.
Yang, Y.H., 2017, Evaluation of reinforcement effect of grouting using aramid fiber, Master Thesis, Chosun University, 1-65.
Yoo, S.J., Yuan, T.F., Hong, S.H., Yoon, Y.S., 2020, Evaluation of structural performance of concrete beams strengthened with carbon fiber sheets and no-slump concrete, Journal of the Korean Society of Hazard Mitigation, 20(4), 185-193 (in Korean with English abstract).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.