최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.34 no.2, 2021년, pp.101 - 107
윤동현 (Department of Mechanical Engineering, Chungnam National University) , 김상덕 (Department of Mechanical Engineering, Chungnam National University) , 김재훈 (Department of Mechanical Engineering, Chungnam National University) , 도영대 (HANKUK FIBER GROUP)
Composite structures have components and joints. Theses connections or joints can be potentially weak points in the structure. The failure mode of the composite bolted joint is designed as a bearing failure mode for structural safety. The load-displacement relation exhibits bearing failure mode show...
Dutton, S., Kelly, D., and Baker, A., Composite Materials for Aircraft Structures, American Institute of Aeronautics and Astronautics, 2004.
Hundley, J.M., Hahn, H.T., Yang, J.M., and Facciano, A.B., "Three-dimensional Progressive Failure Analysis of Bolted Titanium-graphite Fiber Metal Laminate Joints," Journal of Composite Materials, Vol. 45, No. 7, 2011, pp. 751-769.
ASTM D5961/D5961M-13, Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates, ASTM Standard, 2013, pp. 1-31.
Lapczyk, I., and Hurtado, J.A., "Progressive Damage Modeling in Fiber-reinforced Materials," Composites Part A: Applied Science and Manufacturing, Vol. 38, No. 11, 2007, pp. 2333-2341.
Riccio, A., Di Costanzo, C., Di Gennaro, P., Sellitto, A., and Raimondo, A., "Intra-laminar Progressive Failure Analysis of Composite Laminates with a Large Notch Damage," Engineering Failure Analysis, Vol. 73, 2017, pp. 97-112.
Matzenmiller, A., Lubliner, J., and Taylor, R.L., "A Constitutive Model for Anisotropic Damage in Fiber-composites," Mechanics of Materials, Vol. 20, No. 2, 1995, pp. 125-152.
Linde, P., and de Boer, H., "Modelling of Inter-rivet Buckling of Hybrid Composites," Composite Structures, Vol. 73, No. 2, 2006, pp. 221-228.
Hashin, Z., "Failure Criteria for Unidirectional Fiber Composites," Journal of Applied Mechanics, Vol. 47, No. 2, 1980, pp. 329-334.
Tikarrouchine, E., Chatzigeorgiou, G., Praud, F., Piotrowski, B., Chemisky, Y., and Meraghni, F., "Three-dimensional FE2 Method for the Simulation of Non-linear, Rate-dependent Response of Composite Structures," Composite Structures, Vol. 193, 2018, pp. 165-179.
Nikbakht, M., Toudeshky, H.H., and Mohammadi, B., "Experimental Validation of an Empirical Nonlinear Shear Failure Model for Laminated Composite Materials," Journal of Composite Materials, Vol. 51, No. 16, 2017, pp. 2331-2345.
Kodagali, K., Progressive Failure Analysis of Composite Materials using the Puck Failure Criteria, Doctoral Dissertation, University of South Carolina., USA, 2017.
ASTM D3039/D3039M-14, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, 2014, pp. 1-13.
ASTM D3410/D3410M-16, Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading, ASTM International, 2016, pp. 1-16.
ASTM D5379/D5379M-12, Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method, ASTM International, 2012, pp. 1-14.
ASTM Standard D5528-13, Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-reinforced Polymer Matrix Composites, ASTM International, 2013, pp. 1-13.
ASTM Standard D7905/D7905M-13, Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-reinforced Polymer Matrix Composites, ASTM International, 2013, pp. 1-18.
Pinho, S.T., Robinson, P., and Iannucci, L., "Fracture Toughness of the Tensile and Compressive Fibre Failure Modes in Laminated Composites," Composites Science and Technology, Vol. 66, No. 13, 2006, pp. 2069-2079.
Laffan, M.J., Pinho, S.T., Robinson, P., and Iannucci, L., "Measurement of the in situ Ply Fracture Toughness Associated with Mode I Fibre Tensile Failure in FRP. Part I: Data Reduction," Composites Science and Technology, Vol. 70, No. 4, 2010, pp. 606-613.
Laffan, M.J., Pinho, S.T., Robinson, P., and Iannucci, L., "Measurement of the in situ Ply Fracture Toughness Associated with Mode I Fibre Tensile Failure in FRP.Part II: Size and Lay-up Effects", Composites Science and Technology, Vol. 70, No. 4, 2010, pp. 614-621.
Cann, M.T., Adams, D.O., and Schneider, C.L., "Characterization of Fiber Volume Fraction Gradients in Composite Laminates," Journal of Composite Materials, Vol. 42, No. 5, 2008, pp. 447-466.
Kang, M.S., Jeon, M.H., Kim, I.G., Kim, M.G., Go, E.S., and Lee, S.W., "The Effect of the Fiber Volume Fraction Non-uniformity and Resin Rich Layer on the Rib Stiffness Behavior of Composite Lattice Structures," Composites Research, Vol. 31, No. 4, 2018, pp. 161-170.
Shigley, J.E., Shigley's Mechanical Engineering Design, Vol. 8., McGraw-Hill, New York, NY, USA, 2008.
Herrington, P.D., and Sabbaghian, M., "Factors Affecting the Friction Coefficients between Metallic Washers and Composite Surfaces," Composites, Vol. 22, No. 6, 1991, pp. 418-424.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.