$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

설치조건에 따른 삼축 마이크로파일(TMP)의 수평지지력
Lateral Bearing Capacity of Triaxial Micropile by Installaton Condition 원문보기

한국지반환경공학회논문집 = Journal of the Korean Geoenvironmental Society, v.22 no.5, 2021년, pp.5 - 12  

김태현 (Korea Engineering Consultants Corp. (KECC)) ,  안광국 (School of Civil Engineering, Chungbuk National University) ,  안성율 (SY-tech Consultant co. ltd.)

초록
AI-Helper 아이콘AI-Helper

마이크로파일은 300mm 이하인 소구경 현장타설말뚝을 말하며, 일반적으로 소구경 파일임에도 연직력에 대한 파일의 저항력이 큰 반면, 수평하중에 대한 저항성은 미비한 것으로 알려져 있다. 여러 마이크로파일 공법들 중 최근 수평지지력(내진저항력)의 증가를 위한 목적으로 개발된 삼축 마이크로파일(Triaxial micropile, TMP)이 개발되었다. 삼축 마이크로파일은 각축에 경사지게 설치된 3개의 마이크로파일이 수평하중에 저항하므로 좀 더 효과적으로 수평하중에 저항할 수 있는 장점이 있다. 본 연구에서는 파일길이 및 설치각도를 달리 설치했을 경우 삼축 마이크로파일에 대한 수평지지력을 평가하고자 3차원 수치해석을 수행하였다. 연구결과, 짧은 파일(L/d < 60)에서 파일길이비 증가에 따른 수평지지력 증가가 발생하였으나, 긴 파일(L/d ≥ 60)에서는 지지력 증가가 미미했다. 마이크로파일 설치각(θ)이 증가함에 따라 수평지지력이 증가하였으나 35° 초과 시 지지력 증가가 급격히 저하되었고, 짧은 파일보다 긴 파일에서 마이크로파일 설치각(θ)의 증가에 따른 수평지지력 상승이 컸다.

Abstract AI-Helper 아이콘AI-Helper

Micropile refers to a small-diameter cast-in-place pile of less than 300 mm. In general, even though it is a small-diameter pile, it is known that the resistance of the pile to the vertical force is large, while the resistance to the lateral load is insufficient. Among several micropile methods, a t...

주제어

표/그림 (10)

참고문헌 (13)

  1. AASHTO (2002), Standard Specifications for Highway Bridge, Association of State Highway and Transportation Officials Publication, Washington, D.C. ISBN:156051-171-0. 

  2. Abdollahi, K. and Mortezaei, A. (2015), A new expression for determining the bending stiffness of circular micropile groups, Journal of Soil Dynamics and Earthquake Engineering, Soil Dynamics and Earthquake Engineering, Vol. 77, pp. 58~70. 

  3. Ali, G., Hadi, H., Elias, G. and Jurgis, M. (2014), Comprehensive three dimensional finite element analysis, parametric study and sensitivity analysis on the seismic performance of soil-micropilesuperstructure interaction, Journal of Soil Dynamics and Earthquake Engineering, vol.58, pp.21-36. 

  4. FHWA (2005), Micropile Design and Construction, Unit States epartment of Transportation, No.FHWA NHI-05-039, December, pp. 7-1~7-28. 

  5. Hussain, Z., Sharma, B. and Rahman, T. (2019), Micropile group behaviour subjected to lateral loading, Innovative Infrastructure Solutions, Vol. 4(1), https://doi.org/ 10.1007/s41062-019-0206-3 (In Korean). 

  6. Hwang, T. H., Kim, M. Y. and Lee, Y. S. (2020), Variation of lateral bearing capacity of 2-row micropile with installation conditions by model test, Journal of the Korean Geotechnical Society, Korean Geotechnical Society, Vol. 36, No. 11, pp. 25~49 (In Korean). 

  7. Kim, S. B., Son, S. W. and Kim, J. M. (2020), Horizontal behavior characteristics of umbrella-type micropile applied in sandy soil subjected to seismic motion, Journal of the Korean Geo-Environmental Society, Korean Geo - Environmental Society, Vol. 21, No. 7, pp. 5~16 ( In Korean). 

  8. Kim, T. H. (2021), Behavioral analysis of triaxial micropile through field loading test and 3D-numerical analysis, Journal of the Korean Geo Environmental Society, Korean Geo Environmental Society, Vol. 22, No. 2, pp. 15~22 (In Korean). 

  9. MIDAS (2010) Manuals of MIDAS GTS: Application Method and Input Material Properties of Interface Element. MIDAS IT, Korea. 

  10. Oh, J. B., Hwang, T. H., Huh, I. G., Shin, J. H. and Kwon, O. Y. (2015), Horizontal bearing characteristics of micropiles with the length ratio and installation angle of pile, Journal of the Korean Geotechnical Society, Korean Geotechnical Society, Vol. 31, No. 6, pp. 5~13 (In Korean). 

  11. Park, S. W., Jung, D. J., Kwak, K. S. and Lee, J. H. (2007), Evaluation of normalized behavior of bridge foundation reinforced by micropile, Journal of the Korean Geotechnical Society, Vol. 23, No. 5, pp. 5~14 (In Korean). 

  12. Shahrour, I., Alsaleh, H. and Souli, M. (2012), 3D elastoplastic analysis of the seismic performance of inclined micropiles, Journal of Computers and Geotechnics, Vol. 39, pp. 1~7. 

  13. Shin, J. H. (2015), Geomechanics & Engineering-analysis and design, CIR, Korea, pp. 573~608 (In Korean). 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로