참고문헌 (14)

1. Lee, D. H., Kwon, S. J., Choi, J. B., Kim, Y. J., "Experimental Study on Fatigue Crack Initiation and Propagation due to Fretting Damage in Press-fitted Shaft," Korean Society of Mechanical Engineering, Vol. 31, No. 6, pp. 701-709, 2007. 

   원문보기 상세보기

2. Lee, D. H., Kwon, S. J., Seo, J. W., Kwon, S. T., and You, W. H., "Evaluation of Fatigue Crack Initiation Life according to the Hub Contact Shape in a Pressfitted Shaft," Proc. of KSPE Spring Conference, Vol. 20, pp. 1467-1468, 2010. 

3. Smith, R. A., Hillmansen, S., "A Brief Historical Overview of the Fatigue of Railway Axles," Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit, Vol. 218, No. 4, pp. 267-278, 2004. 

   상세보기

4. Shin, J. M., Han, S. H., Han, D. S., "Investigation of Stress Concentration and Fatigue Life of Axle Drive Shaft with Relief Groove," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1. pp. 88-94, 2012. 

5. Moon, H. J., Sim, K. J., Jeon, N. J., "A Study on the Structural Strength Fatigue Improvement of an Axle Shaft for a 3.5-Ton Commercial Vehicle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 3. pp. 71-77, 2018. 

   원문보기 상세보기

6. Alfredsson, B., "Fretting fatigue of a shrink-fit pin subjected to rotating bending: experiments and simulations," International Journal Fatigue, Vol. 31, No. 10, pp. 1559-1570, 2009. 

   상세보기

7. Peterson, R. and Wahl, A., "Fatigue of Shafts at Fitted Members with a Related Photoelastic Analysis," Journal of Applied Mechanics, Vol. 2, No. 1, pp. 1-11, 1935. 

8. Nishioka, K. and Komatsu, H., "Researches on Increasing the Fatigue Strength of Press-Fitted Shaft Assembly," Bull JSME, Vol. 10, No. 42, pp. 880-889, 1967. 

   

9. Biron, G., Vadean, A., and Tudose, L., "Optimal Design of Interference Fit Assemblies Subjected to Fatigue Loads," Structural and Multidisciplinary Optimization, Vol. 47, No. 3, pp. 441-451, 2013. 

   상세보기

10. Lee, D. H., Kwon, S. J., Choi, J. B. and Kim, Y. J., "The Effect of Fretting Wear on Fatigue Life of Press-fitted Shaft," The Korean Society of Mechanical Engineers, Vol. 31, No. 11, pp. 1083-1092, 2007. 

    원문보기 상세보기

11. Makino, T., Yamamoto, M., and Hirakawa, K., "Effect of Contact Edge Profile on Fretting Fatigue Crack Initiation Site in Press-fitted Axle," Transactions of the Japan Society of Mechanical Engineers (A), Vol. 63, No. 615, pp. 2312-2317, 1997. 

    상세보기

12. Park, S. H., Design of Experiments, Minyoung-Sa, Korea, 2009. 

13. Hong, K. J., Jeon, K. K., Cho. Y. S., Choi, D. H. and Lee, S. J., "A Study on the Construction of Response Surface for Design Optimization," Transactions of the Korean Society of Mechanical Engineers (A), Vol. 24, No. 6, pp. 1408-1418, 2000. 

14. Cardei, M. and Wu, J., "Energy-Efficieant Coverage Problem in Wireless Ad Hoc Sensor Networks," Computer Communications, Vol. 29, No.4, pp. 413-420, 2006. 

    상세보기

저자의 다른 논문 :

변성광 (8) 이동형 (48)