$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

모듈러 주택의 열교 및 결로 취약부위별 단열성능 분석
Insulation Performance Analysis of Vulnerable Parts of Thermal Bridge and Condensation in Modular Buildings 원문보기

한국건설관리학회논문집 = Korean journal of construction engineering and management, v.22 no.3, 2021년, pp.31 - 39  

김미연 (서울주택도시공사 SH도시연구원(중앙대학교 일반대학원 건축공학과)) ,  김형근 (서울주택도시공사 SH도시연구원) ,  박진철 (중앙대학교 건축학부)

초록
AI-Helper 아이콘AI-Helper

모듈러 공법은 내장재와 기계·전기 설비 등이 시공된 구조체를 제작 공장에서 건설 현장으로 운반하여 설치 및 시공하는 공법이다. 모듈러 공법은 특히 주택과 같은 소규모의 비교적 구조가 간단한 건축물을 대상으로 활발하게 적용되고 있는 추세이다. 국내건설 산업에 모듈러 주택의 도입된 기간이 길지 않은 만큼 아직 모듈러 주택의 환경적 특성에 대한 연구가 부족한 실정이다. 따라서 본 연구의 목적은 모듈러 주택의 단열성능을 적외선 이미지 분석과, Air-Surface Thermal Ratio 방법, 실내외 온도차비를 활용하여 실증적으로 분석하는 것이다. 이를 위해 실제 서울시에 위치한 준공 후 2년이 경과된 모듈러 주택과 RC 주택을 비교하여 단열성능 분석하였다.

Abstract AI-Helper 아이콘AI-Helper

The modular construction method is an off-site construction method using built-in structures from the manufacturing facilities. Modular construction is commonly applied to buildings which have relatively smaller and simpler structures than other types of buildings. Although modular building has emer...

주제어

표/그림 (16)

참고문헌 (9)

  1. An, H.Y., Lee H.M., and Jang O.Y. (2015). "Analysis on the POE Result of the Rental Modular Housing: Focus on the Dormitory of Gongneungdong and Cheonyeondong." Journal of The Korean Society of Living Environmental System, 22(6), pp. 898-911. 

  2. Chun, C.Y. (2016). "A Study of Measurement on Airtightness Performance and Indoor Air Quality of Modular Mock-up Housing." Architectural Institute of Korea, 36(2), pp. 1341-1342. 

  3. Chung, J.S., Lim, S.H., Heo, B.W., Chae, J.Y., and Park, J.H. (2020). "Development of PC modular Construction System using 3D Infill." In Proceedings of the Korean Institute of Building Construction Conference (pp. 14-15). The Korean Institute of Building Construction. 

  4. Jeong, S.Y., and Yoon, S.H. (2012). "Method to quantify the effect of apartment housing design parameters on outdoor thermal comfort in summer." Building and environment, 53, pp. 150-158. 

  5. Kim, S.H., Kim, J.H., Jeong, H., and Song, K.D. (2017). "The method of in-situ ASTR method diagnosing wall U-value in existing deteriorated houses: Analysis of influence of internal surface total heat transfer rate." Korea Institute of Ecological Architecture and Environment, KIEAE, 17(4), pp. 41-48. 

  6. Lee, K.B., Kim, K.R., Shin, D.W., and Cha, H.S.. (2011). "A Proposal for Optimizing Unit Modular System Process to Improve Efficiency in Off-site Manufacture, Transportation and On-site Installation." Korean Journal of Construction Engineering and Management, KICEM, 12(6), pp. 14-21. 

  7. Lee, J.S., and Kim, Y.S. (2017). "Analysis of cost-increasing risk factors in modular construction in Korea using FMEA." KSCE Journal of Civil Engineering, 21(6), pp. 1999-2010. 

  8. Park, B., Cho, J., and Jeong, Y. (2019). "Thermal Performance Assessment of Flexible Modular Housing Units for Energy Independence Following Disasters." Sustainability, 11(20), p. 5561. 

  9. Park, J.I., and Han, S.H. (2017). "A Comparative Analysis for the Energy Performance of the Prefabricated Residential Modular Spaces." Korea Institute of Ecological Architecture and Environment, KIEAE, 17(5), pp. 87-94. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로