$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

폐 이차전지 리사이클링을 위한 건식공정 생성물 분석
Analysis of Dry Process Products for Recycling of Spent Secondary Batteries 원문보기

청정기술 = Clean technology, v.27 no.2, 2021년, pp.139 - 145  

김진한 (공주대학교 화학공학과) ,  김용철 (공주대학교 화학공학과) ,  오승교 (공주대학교 화학공학과) ,  전종기 (공주대학교 화학공학과)

초록
AI-Helper 아이콘AI-Helper

본 연구의 목적은 건식 공정을 통해 폐전지에서 금속을 회수하는 것이다. 특히, 열처리 온도를 변수로 하여 공정 중에 발생되는 액상 및 기상상태의 생성물과 공정 후에 회수되는 고상상태의 생성물에 대하여 정성 및 정량적으로 분석하여 비교하였다. 폐전지의 커버를 제거한 후, NaCl 용액에 존치하여 방전시켰다. 폐전지를 파쇄과정을 통하여 가루형태로 만들어서 산소 분위기의 튜브 전기로에서 폐전지의 용융실험을 수행하였다. 리튬이온 폐전지는 반응온도 850 ℃에서 고체상태 생성물의 회수율은 80.1 wt%이었고, 주성분은 27.2 wt%의 코발트이었으며 그 외 리튬, 구리, 알루미늄 등이 미량 존재하였다. 니켈-수소 폐전지는 반응온도 850 ℃에서 회수율이 99.2 wt%로 건식공정으로부터 손실되는 금속이 거의 없었으며 약 37.6 wt%의 니켈이 주성분이었다. 그 외, 철을 포함하여 여러 금속을 가지고 있다. 니켈-카드뮴 폐전지는 온도가 증가할수록 카드뮴이 기화되면서 회수율이 65.4 wt%까지 낮아진다. 반응온도 1050 ℃에서 회수된 고체상태의 주 금속성분은 41 wt%의 니켈과 12.9 wt%의 카드뮴이었다. 또한 니켈-카드뮴 폐전지는 다른 이차 폐전지로부터 검출되지 않은 벤젠톨루엔 성분이 기체상태의 생성물에서 검출되었다. 본 연구 결과는 폐 이차전지의 건식 리사이클링 공정 연구에 기초 자료로서 활용 가능하다.

Abstract AI-Helper 아이콘AI-Helper

The purpose of this study is to recover valuable metals from spent batteries using a dry process. We focused on the effect of the smelting temperature on the composition of recovered solid and liquid products and collected gaseous products. After removal of the cover, the spent battery was left in N...

주제어

표/그림 (11)

참고문헌 (18)

  1. Liang, Y., Zhao, C.-Z., Yuan, H., Chen, Y., Zhang, W., Huang, J.-Q., Yu, D., Liu, Y., Titirici, M.-M., Chueh, Y.-L., Yu, H., and Zhang, Q., "A Review of Rechargeable Batteries for PorTable Electronic Devices," Infomat., 1(1), 6-32 (2019). 

  2. Wiaux, J.-P., and Waefler, J.-P., "Recycling Zinc Batteries: An Economical Challenge in Consumer Waste Management," J. Power Sources., 57(1-2), 61-65 (1995). 

  3. Resource Recycling Technology Development Corporation, White Paper on Resource Recycling, Cheongmoongak Publishing Co. Seoul, (2009). 

  4. Bernardes, A. M., Espinosa, D. C. R., and Tenorio, J. A. S., "Recycling of Batteries: a Review of Current Processes and Technologies," J. Power Sources., 130(1-2), 291-298 (2004). 

  5. Lee, H. Y., and Cho, B. W., "State of Recycling Technology for Waste Batteries," Prospect. Ind. Chem., 3(2), 23-31 (2000). 

  6. Al-Thyabat, S., Nakamura, T., Shibata, E., and Iizuka, A., "Adaptation of Minerals Processing Operations for Lithium-ion (LiBs) and Nickel Metal Hydride (NiMH) Batteries Recycling: Critical Review," Miner. Eng., 45, 4-17 (2013). 

  7. Wang, J., Chen, M., Chen, H., Luo, T., and Xu, Z., "Leaching Study of Spent Li-ion Batteries," Procedia Environ. Sci., 16, 443-450 (2012). 

  8. Zhang, X., Li, L., Fan, E., Xue, Q., Bian, Y., Wu, F., and Chen, R., "Toward Sustainable and Systematic Recycling of Spent Rechargeable Batteries," Chem. Soc. Rev., 47(19), 7239-7302 (2018). 

  9. Lewis, H., "Battery Waste and Recycling," Issues., 92, 24-27 (2010). 

  10. Yesiltepe, S., Bugdayci, M., Yucel, O., and Sesen, M. K., "Recycling of Alkaline Batteries via a Carbothermal Reduction Process," Batteries., 5(1), 35 (2019) 

  11. Larouche, F., Tedjar, F., Amouzegar, K., Houlachi, G., Bouchard, P., Demopoulos, G. P., and Zaghib, K., "Progress and Status of Hydrometallurgical and Direct Recycling of Li-Ion Batteries and Beyond," Materials (Basel)., 13(3), 801 (2020). 

  12. Mossali, E., Picone, N., Gentilini, L., Rodriguez, O., Perez, J. M., and Colledani, M., "Lithium-ion Batteries Towards Circular Economy: A Literature Review of Opportunities and Issues of Recycling Treatments," J. Environ. Manage., 264, 110500 (2020). 

  13. Bruckner, L., Frank, J., and Elwert, T., "Industrial Recycling of Lithium-Ion Batteries-A Critical Review of Metallurgical Process Routes," Metals., 10(8), 1107 (2020). 

  14. Kim, J. H., "Studies on the Pretreatment of Waste Lithium Ion Battery for the Recovery of Lithium Cobalt Oxide," M.S. Dissertation, Inha University, Incheon (2010). 

  15. Lee, C. K., and Kim, T.-H., "Leaching of Cathodic Active Materials from Spent Lithium Ion Battery," J. of Korean Inst. of Resources Recycling., 9(4), 37-43 (2000). 

  16. Swain, B., Jeong, J., Kim, M. S., Lee, J.-C., and Shon, J.-S., "Recovery of Cobalt from Waste Cathodic Active Material Generated in Manufacturing Lithium Ion Batteries by Hydrometallugical Process," J. of Korean Inst. of Resources Recycling., 14(6), 28-36 (2005). 

  17. Kim, H.-S., and Moon, S.-In., "Recycling of Portable Secondary Batteries," J. Korean Electrochem. Soc., 4(2), 77-81 (2001). 

  18. Nogueira, C. A., and Delmas, F., "New Flowsheet for the Recovery of Cadmium, Cobalt and Nickel from Spent Ni-Cd Batteries by Solvent Extration," Hydrometallurgy., 52(3), 267-287 (1999). 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로