최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of KIBIM = 한국BIM학회논문집, v.11 no.1, 2021년, pp.21 - 30
정재환 (성균관대학교 미래도시융합공학과) , 김도형 (다스코(주) 기술연구소) , 김현기 (다스코(주) 기술연구소)
Reinforcing bars, a major component of the pre-fab structure, adheres to the existing on-site assembly method and attempts to develop and commercialize the technology of the pre-assembly method, but the effect is insignificant. Welded Wire / Bar Mat (WBM) has various advantages such as commercializa...
Bae, J. S. (2011). Reinforcement steel design applying set-based design methodology to flat plate in the structural BIM (S-BIM) environment, Masters Thesis Hanyang University, pp. 81-86.
Cho, Y. G, Kim, H., G., Lim, S. (2020). Domestic Construction Industry Outlook in the Fourth Industrial Era, Korea Institute of Ecological Architecture and Environment, 20(4), pp. 89-94.
Choi, J. S., Open BIM & Design Information Quality Control, Goomi Book: Seoul, Korea, (2012).
Choi, J. (2020). The Comparative Analysis of 2D And BIM-Based RC Quantity Take-off And Error Rate, Master thesis Gyeongsang National University.
Hwang, Y., Yang, K., Sim, J., Choi, Y. (2018). Evaluation of Axial Compressive Performance of Section Enlargement Strengthening Columns with Prefabricated Reinforcement Units in the Jacket Section, Journal of the Korea Concrete Institute, 30(6), pp. 609-616.
Hwang, Y., Yang, K., Sim, J. (2020). Evaluation on the Structural Performance of Reinforced Concrete Columns with Supplementary Prefabricated V-ties, Journal of the Korea Concrete Institute, 32(3), pp. 225-232.
Jang, J. W. (2013). Development of Rebar Placement System of R.C Foundation using Lean Design Technique based on Structural BIM (S-BIM), Masters Thesis Hanyang University, pp. 47-48.
Jeon, C. (2011). Design and Development of BIM Based Rebar Shop Drawing System, Master thesis Daejeon University.
Kim, D., Kim, O. (2003). Application method of structural welded-wire-faric for practical use, The Architectural Institute of Korea, 23(1), pp. 407-410.
Kim, D., Kim, O. (2004). Standardization of structural welded-wire-fabric for practical use and analysis of the application results in the pilot project, Journal of the Architectural Institute of Korea Structure & Construction, 20(3), pp. 113-120.
Kim, I. H., Lee, S. J. ( 2005). Development of an interoperability model for different construction drawing standards based on ISO 10303 STEP, Autom. Constr., 14, pp 633-649.
Kim, T. G. (2005). An Indexing Technique using BitmapInvert Method based on Relative Position Coordinates for Search and Update Operations on XML and MPEG-7 documents, Doctors Thesis Kwangwoon University.
Kim, Y. (2019). A study on the Automatic system of Standardized Rebar Shop Drawing, Master thesis Yeungnam University.
Lee, G. (2014). Preparation of Rebar Shop Drawing Based on BIM and Rebar Work Management Process Application, Master thesis Sun Moon University.
Lee, J. H. (2011). A study on the establishment of integrated structural model in RC structures for the automatic reinforcement placement system based on structural building information modeling, Masters Thesis Hanyang University, pp. 46-48.
Lee, S. (2013). Modelling for Estimation of RC Structural Material by BIM, Master thesis Hoseo University.
Mckinsey global institute (2017). Reinventing construction: A route to higher productivity.
Nawari, N. O. (2012). BIM standard in off-site construction. Journal of Architectural Engineering, 18(2), pp. 107-113.
Park, J. (2020). A Development on BIM/Deep Learning based Building Object Detecting Technology for Improving Building Supervision Efficiency, Master thesis Kyungpook National University.
Seo, H. S. (2014). A Study on the Application of Rebar Quantity Estimation and Placing Drawing with 3D Modeling, Seoul National University of Science & Technology.
Seong J. (2012). Design and Development of BIM Based Rebar Shop Drawing System for Column and Wall, Master thesis Daejeon University.
Smith, Ryan E. (2016). Off-site and modular construction explained, Off-Site Construction Council, National Institute of Building Sciences.
Son, J., U, Lee, J. S. (2019). Off Site Construction, Journal of the Construction engineering and management of Korea, 20(5), pp. 3-7.
Yoo, B. Y. (2010). BIM based design system for PSC girder bridges, Masters Thesis Sungkyunkwan University, pp. 67-70.
Yoon, Y. H. (1994). A Study on the Establishment of Standard Specification for Structural Welded Wire Fabric, Magazine and journal of krean society of steel construction, 6(3), pp. 145-155.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.