$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

화재 발생 시 목재 수종의 화재위험성 등급 평가
Assessment of Fire Risk Rating for Wood Species in Fire Event 원문보기

공업화학 = Applied chemistry for engineering, v.32 no.4, 2021년, pp.423 - 430  

진의 (강원대학교 소방방재연구센터) ,  정영진 (강원대학교 소방방재공학과)

초록
AI-Helper 아이콘AI-Helper

본 연구는 건자재용 목재의 화재위험성 및 화재위험성 등급을 평가하기 위하여 Chung's equations-III, -IV에 의한 화재성능지수-III (FPI-III), 화재성장지수-III (FGI-III), 화재위험성지수-IV (FRI-IV)를 중심으로 조사하였다. 시험편은 적삼목, 전나무, 물푸레나무, 단풍나무를 사용하였다. 화재 특성은 시험편에 대하여 콘칼로리미터(ISO 5660-1) 장비를 이용하여 조사하였다. 연소반응 후 측정된 FPI-III는 polymethylmetacrylate (PMMA) 기준으로 0.86~12.77로 나타났다. FGI-III는 PMMA를 기준으로 0.63~5.26으로 나타났다. 화재위험성 등급 지수인 FRI-IV에 의한 화재 등급은 0.05~6.12였으며 적삼목이 단풍나무와 비교하여 122.4배 높았다. FRI-IV에 의한 화재위험성 등급은 단풍나무, 물푸레나무, 전나무, PMMA, 적삼목 순서로 증가하였다. 모든 시편의 CO 피크농도는 103~162 ppm으로 측정되었으며 미국직업안전위생관리국(occupational safety and health administration)의 허용기준(permissible exposure limits)인 50 ppm보다 2.1~3.2배 높게 나타났다. 적삼목과 같이 체적밀도가 작고 휘발성 유기물질을 다량 함유한 소재는 FPI-III가 낮고 FGI-III가 높으므로 화재위험성 등급이 높은 것으로 나타났다.

Abstract AI-Helper 아이콘AI-Helper

In order to evaluate the fire risk and fire risk rating of wood for construction materials, this study focused on fire performance index-III (FPI-III), fire growth index-III (FGI-III), and fire risk index-IV (FRI-IV) according to Chung's equations-III and -IV. Western red cedar, needle fir, ash, and...

주제어

표/그림 (9)

참고문헌 (30)

  1. F. M. Pearce, Y. P. Khanna, and D. Raucher, Thermal Analysis in Polymer Flammability, Chap. 8, Thermal characterization of polymeric materials, Academic Press, New York, USA (1981). 

  2. M. Gao, K. Zhu, and Y. J. Sun, Thermal degradation of wood treated with amino resins and amino resins modified with phosphate in nitrogen, J. Fire Sci., 22, 505-515 (2004). 

  3. M. Gao, C. Y. Sun, and K. Zhu, Thermal degradation of wood treated with guanidine compounds in air: Flammability study, J. Therm. Anal. Calorim., 75, 221-232 (2004). 

  4. N. Boonmee and J. G. Quintiere, Glowing ignition of wood: the on set of surface combustion, Proc. Combust. Inst., 30, 2303-2310 (2005). 

  5. M. Spearpoint and J. Quintiere, Predicting the piloted ignition of wood in the cone calorimeter using an integral model-effect of species, grain orientation and heat flux, Fire Saf. J., 36, 391-415 (2001). 

  6. M. Delichatsios, B. Paroz, and A. Bhargava, Flammability properties for charring materials, Fire Saf. J., 38, 219-228 (2003). 

  7. T. Fateh, T. Rogaume, J. Luche, F. Richard, and F. Jabouille, Characterization of the thermal decomposition of two kinds of plywood with a cone calorimeter-FTIR apparatus, J. Anal. Appl. Pyrol., 107, 87-100 (2014). 

  8. K. Li, D. Pau, J. Wang, and J. Ji, Modelling pyrolysis of charring materials: determining flame heat flux using bench-scale experiments of medium density fibreboard (MDF), Chem. Eng. Sci., 123, 39-48 (2015). 

  9. L. Terrei, Z. Acem, P. Lardet, P. Boulet, and G. Parent, Study of wood self-extinguishment with a double sliding cone calorimeter, Fire Saf. J., 122, 103316 (2021). 

  10. F. Z. Brahmia, K. Zsolt, P. G. Horvath, and T. L. Alpar, Comparative study on fire retardancy of various wood species treated with PEG 400, phosphorus, and boron compounds for use in cement-bonded wood-based products, Surf. Interfaces, 21, 100736-100747 (2020). 

  11. ISO 5660-1, Reaction-to-fire tests-heat release, smoke production and mass loss rate-part 1: heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement), Genever, Switzerland (2015). 

  12. M. A. Delichatsios, Smoke yields from turbulent buoyant jet flames, Fire Saf. J., 20, 299-311 (1993). 

  13. B. Tawiah, B. Yu, R. K. K. Yuen, Y. Hu, R. Wei, J. H. Xin, and B. Fei, Highly efficient flame retardant and smoke suppression mechanism of boron modified graphene oxide/poly(lactic acid) nanocomposites, Carbon, 150, 8-20 (2019). 

  14. L. Yan, Z. Xu, and N. Deng, Effects of polyethylene glycol borate on the flame retardancy and smoke suppression properties of transparent fire-retardant coatings applied on wood substrates, Prog. Org. Coat., 135, 123-134 (2019). 

  15. Y. J. Chung and E. Jin, Rating evaluation of fire risk for combustible materials in case of fire, Appl. Chem. Eng., 32, 75-82 (2021). 

  16. W. T. Simpso, Drying and Control of Moisture Content and Dimensional Changes, Chap. 12, Wood Handbook-wood as an Engineering Material, Forest Product Laboratory U.S.D.A., Forest Service Madison, Wisconsin, USA, 1-21 (1987). 

  17. J. D. Dehaan, Kirk's Fire Investigation (Fifth Ed.), 84-112, Pearson, London, England (2002). 

  18. M. A. Buchanan, The ignition temperature of certain pulps and other wood components, TAPPI, 35, 209-211 (1952). 

  19. J. G. Quintire, Principles of Fire Behavior, Chap. 5, Cengage Learning, Delmar, USA (1998) 

  20. Y. J. Chung, Comparison of combustion properties of native wood species used for fire pots in Korea, J. Ind. Eng. Chem., 16, 15-19 (2010). 

  21. B. Schartel and T. R. Hull, Development of fire-retarded materials-Interpretation of cone calorimeter data, Fire Mater., 31, 327-354 (2007). 

  22. J. Pohleven, M. D. Burnard, and A. Kutnar, Volatile organic compounds emitted from untreated and thermally modified wood-a review, Wood Fiber Sci., 51, 231-254 (2019). 

  23. V. Babrauskas, Development of the cone calorimeter - A bench-scale, heat release rate apparatus based on oxygen consumption, Fire Mater., 8, 81-95 (1984). 

  24. C. Jiao, X. Chen, and J. Zhang, Synergistic effects of Fe 2 O 3 with layered double hydroxides in EVA/LDH composites, J. Fire Sci., 27, 465-479 (2009). 

  25. R. H. White and M. A. Dietenberger, Wood Handbook: Wood as an Engineering Material, Ch.17: Fire Safety, Forest Product Laboratory U.S.D.A., Forest Service Madison, Wisconsin, USA (1999). 

  26. A. Ernst and J. D. Zibrak, Carbon monoxide poisoning, N. Engl. J. Med., 339, 1603-1608 (1998). 

  27. R V. Burg, Toxicology update, J. Appl. Toxicol., 19, 379-386 (1999). 

  28. OHSA, Carbon Monoxide, OSHA Fact Sheet, United States National Institute for Occupational Safety and Health, September 14, USA (2009). 

  29. U. C. Luft, Aviation Physiology: the Effects of Altitude in Handbook of Physiology, 1099-1145, American Physiology Society, Washington DC, USA (1965). 

  30. OHSA, Carbon Dioxide, Toxicological Review of Selected Chemicals, Final rule on air comments project, OHSA's Comments, January 19 (1989). 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로