참고문헌 (15)

1. L. Wang, A. Husar, T. Zhou, and H. Liu, "A parametric study of PEM fuel cell performances", Int. J. Hydrogen Energy, Vol. 28, No. 11, 2003, pp. 1263-1272, doi: https://doi.org/10.1016/S0360-3199(02)00284-7. 

   상세보기

2. S. L. Chavan and D. B. Talange, "Modeling and performance evaluation of PEM fuel cell by controlling its input parameters", Energy, Vol. 138, 2017, pp. 437-445, doi: https://doi.org/10.1016/j.energy.2017.07.070. 

   상세보기

3. J. T. Pukrushpan, "Modeling and control of fuel cell systems and fuel processors [dissertation]", University of Michigan, 2003. Retrieved from http://www-personal.umich.edu/~annastef/FuelCellPdf/pukrushpan_thesis.pdf. 

4. G. Vasu and A. K. Tangirala, "Control-orientated thermal model for proton-exchange membrane fuel cell systems", Journal of Power Sources, Vol. 183, No. 1, 2008, pp. 98-108, doi: https://doi.org/10.1016/j.jpowsour.2008.03.087. 

   상세보기

5. J. C. Amphlett, R. F. Mann, B. A. Peppley, P. R. Roberge, and A. Rodrigues, "A model predicting transient responses of proton exchange membrane fuel cells", Journal of Power sources, Vol. 61, No. 1-2, 1996, pp. 183-188, doi: https://doi.org/10.1016/S0378-7753(96)02360-9. 

   상세보기

6. H. Pourrahmani, M. Siavashi, and M. Moghimi, "Design optimization and thermal management of the PEMFC using artificial neural networks", Energy, Vol. 182, 2019, pp. 443-459, doi: https://doi.org/10.1016/j.energy.2019.06.019. 

   상세보기

7. H. Pourrahmani, M. Moghimia, and M. Siavashi, "Thermal management in PEMFCs: the respective effects of porous media in the gas flow channel", Int. J. Hydrogen Energy, Vol. 44, No. 5, 2019, pp. 3121-3137, doi: https://doi.org/10.1016/j.ijhydene.2018.11.222. 

   상세보기

8. I. S. Lim, J. Y. Park, E. J. Choi, and M. S. Kim, "Efficient fault diagnosis method of PEMFC thermal management system for various current densities", Int. J. Hydrogen Energy, Vol. 46, No. 2, 2021, pp. 2543-2554, doi: https://doi.org/10.1016/j.ijhydene.2020.10.085. 

   상세보기

9. P. Hu, G. Y. Cao, X. J. Zhu, and M. Hu, "Coolant circuit modeling and temperature fuzzy control of proton exchange membrane fuel cells", Int. J. Hydrogen Energy, Vol. 35, No. 17, 2010, pp. 9110-9123, doi: https://doi.org/10.1016/j.ijhydene.2010.06.046. 

   상세보기

10. A. Rabbani and M. Rokni, "Dynamic characteristics of an automotive fuel cell system for transitory load changes", Sustainable Energy Technologies and Assessments, Vol. 1, 2013, pp. 34-43, doi: https://doi.org/10.1016/j.seta.2012.12.003. 

    상세보기

11. J. Han, J. Park, and S. Yu, "Control strategy of cooling system for the optimization of parasitic power of automotiv e fuel cell system", Int. J. Hydrogen Energy, Vol. 40, No. 39, 2015, pp. 13549-13557, doi: https://doi.org/10.1016/j.ijhydene.2015.08.067. 

    상세보기

12. N. S. Ap, P. Guerrero, and P. Jouanny, "Influence of fan system electric power on the heat performance of engine cooling module", SAE International in United States, 2003, doi: https://doi.org/10.4271/2003-01-0275. 

13. S. Yu and D. Jung, "A study of operation strategy of cooling module with dynamic fuel cell system model for transportation application", Renewable Energy, Vol. 35, No. 11, 2010, pp. 2525-2532, doi: https://doi.org/10.1016/j.renene.2010.03.023. 

    상세보기

14. J. Han and S, Yu, "Ram air compensation analysis of fuel cell vehicle cooling system under driving modes", Applied Thermal Engineering, Vol. 142, 2018, pp. 530-542, doi: https://doi.org/10.1016/j.applthermaleng.2018.07.038. 

    상세보기

15. Y. Saygili, I. Eroglu, and S. Kincal, "Model based temperature controller development for water cooled PEM fuel cell systems", Int. J. Hydrogen Energy, Vol. 40, No. 1, 2015, pp. 615-622, doi: https://doi.org/10.1016/j.ijhydene.2014.10.047. 

    상세보기

저자의 다른 논문 :

김영현 (3) 유상석 (48)

활용도 Top5 논문

더보기

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.