A quality assurance of computed tomography(CT) have done seven items that were water attenuation coefficient, noise, homogeneity, spatial resolution, contrast resolution, slice thickness, artifact using by standard phantom. But there is no quality assurance items and methods for CT simulator at dome...
A quality assurance of computed tomography(CT) have done seven items that were water attenuation coefficient, noise, homogeneity, spatial resolution, contrast resolution, slice thickness, artifact using by standard phantom. But there is no quality assurance items and methods for CT simulator at domestic institutions yet. Therefore the study aimed to access the CT dose index(CTDI), table tilting, image distortion, laser accuracy, table movement accuracy and CT seven items for CT simulator quality assurance. The CTDI at the center of the head phantom was 0.81 for 80 kVp, 1.55 for 100 kVp, 2.50 for 120 mm, 0.22 for 80 kVp at the center of the body phantom, 0.469 for 100 kVp, and 0.81 for 120 kVp. The table tilting was within the tolerance range of ±1.0° or less. Image distortion had 1 mm distortion in the left and right images based on the center, and the laser accuracy was measured within ±2 mm tolerance. The purpose of this study is to improve the quality assurance items suitable for the current situation in Korea in order to protect the normal tissues during the radiation treatment process and manage the CT simulator that is implemented to find the location of the tumor more clearly. In order to improve the accuracy of the CT simulator when looking at the results, the error range of each item should be small. It is hoped that the quality assurance items of the CT simulator will be improved by suggesting the quality assurance direction of the CT simulator in this study, and the results of radiation therapy will also improve.
A quality assurance of computed tomography(CT) have done seven items that were water attenuation coefficient, noise, homogeneity, spatial resolution, contrast resolution, slice thickness, artifact using by standard phantom. But there is no quality assurance items and methods for CT simulator at domestic institutions yet. Therefore the study aimed to access the CT dose index(CTDI), table tilting, image distortion, laser accuracy, table movement accuracy and CT seven items for CT simulator quality assurance. The CTDI at the center of the head phantom was 0.81 for 80 kVp, 1.55 for 100 kVp, 2.50 for 120 mm, 0.22 for 80 kVp at the center of the body phantom, 0.469 for 100 kVp, and 0.81 for 120 kVp. The table tilting was within the tolerance range of ±1.0° or less. Image distortion had 1 mm distortion in the left and right images based on the center, and the laser accuracy was measured within ±2 mm tolerance. The purpose of this study is to improve the quality assurance items suitable for the current situation in Korea in order to protect the normal tissues during the radiation treatment process and manage the CT simulator that is implemented to find the location of the tumor more clearly. In order to improve the accuracy of the CT simulator when looking at the results, the error range of each item should be small. It is hoped that the quality assurance items of the CT simulator will be improved by suggesting the quality assurance direction of the CT simulator in this study, and the results of radiation therapy will also improve.
Kim JW, Lee JK, Lee MS, Shin DO, Kim YH, Park SY. Acceptance test and quality control of radiotherapy treatment simulator. Journal of Korean Medical Physics. 2002;13(2):90-7.
Ministry of Health and Welfare. Rules for the installation and operation of special medical equipment. 2019.
Sasa M, Jatinder RP, Elizabeth KB, Indra JD, Saiful H, Leh-Nien DL, et al. Quality assurance for computed-tomography simulators and the computed tomography-simulation process: Report of the AAPM radiation therapy committee task group No. 66. American Association of Physicists in Medicine; 2005.
Philippe D, Stewart G. COMP report: CPQR technical quality control guidelines for CT simulators. J Appl Clin Med Phys. 2018;19(2):12-7.
Zakaria GA. Quality assurance in radiotherapy: Simulators, cone beam CT, EPID and immobilization devices. Academic Teaching Hospital of the University of Cologne; 2012.
Kim YK, Kim YM. Comparison of estimated and measured doses of dual-energy computed tomography. Journal of Radiological Science and Technology. 2018;41(5):405-11.
Hwang SH, Min JS, Lee JH, Park HD. Efficiency evaluation of CT simulator QA phantom. The Journal of Korean Society for Radiation Therapy. 2009;21(2):89-95.
Min CK, Yi BY, Ahn SD, Choi EK, Chang HS. A CT simulator phantom for geometrical test. The Journal of the Korean Society for Therapeutic Radiology and Oncology. 2000;18(4):329-36.
Huaiqun G, Rabin H, Yin FF. A positioning QA procedure of 2D/2D(kV/MV) and 3D/3D(CT/CBCT) image matching for radiotherapy patient setup. Journal of Applied Clinical Medical Physics. 2009;10(4):273-80.
Tomic N, Aldelaijan S, Rajala J, Seuntjens J, Devic S. Image quality of radiotherapy CT simulator with different scanner bore size. Physica Medica. 2018;45:65-71.
Li XN, Wang D, Li GF, Xiao SH. Quality assurance on accuracy of the external laser centre in CT simulator. Chinese Journal of Radiation Oncology. 2006;(6):481-3.
Ku EW, Lee JS, Cho JK, Moon SK. An efficient correction process of CT-simulator couch with current diagnostic CT scanners. The Journal of Korea Contents Association. 2009;9(11):254-61.
An HJ, Son JM, Jin HM, Sung JW, Chun MS. Acceptance Test and Clinical Commissioning of CT Simulator. Progress in Medical Physics. 2019;0(4):160-166
Ku EW, Lee JS, Cho JK, Moon SK. An Efficient Correction Process of CT-Simulator Couch with Current Diagnostic CT Scanners. The Journal of Korea Contents Association. 2009;9(11):254-261.
AI-Helper
※ AI-Helper는 부적절한 답변을 할 수 있습니다.