최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Elastomers and composites = 엘라스토머 및 콤포지트, v.56 no.3, 2021년, pp.164 - 171
Kim, Nam Hyun (Dept. of Mechanical Design and Manufacturing Engineering, Seoul National University of Science & Technology) , Woo, In Young (Dept. of Mechanical Design and Manufacturing Engineering, Seoul National University of Science & Technology) , Nam, Kyung Woo (Samyang Packaging Co.) , Yeon, Baek Rim (Samyang Packaging Co.) , Kim, Mi Rae (Samyang Packaging Co.) , Lyu, Min-Young (Dept. of Mechanical Design and Manufacturing Engineering, Seoul National University of Science & Technology)
Due to the problem of environmental pollution by plastics, it is necessary to decrease their consumption. In the case of PET bottles, it is essential to reduce the thickness of the bottle for the reduction of plastic used. For manufacturing PET bottles with reduced thickness, it is a prerequisite to...
Huang, Han-Xiong, Zhan-Song Yin, and Ji-Hu Liu, "Visualization study and analysis on preform growth in polyethylene terephthalate stretch blow molding", Polym. Sci., 103, 564 (2007).
Chung, Tai-Shung, "Principles of preform design for stretch blow molding process", Polym. Plast. Technol. Eng., 20, 147 (1983).
Lontos, A. and A. Gregoriou, "The effect of the deformation rate on the wall thickness of 1.5 LT PET bottle during ISBM (Injection Stretch Blow Molding) process", Procedia CIRP., 81, 1307 (2019).
J. H. Lee, D. C. Yang, and J. S. Kim, "A comparative study on pressure history of melt resins and mold deformation during injection molding using CAE analysis", J. Korean Soc. Precis. Eng., 259 (2019).
Thibault, Francis, et al. "Preform shape and operating condition optimization for the stretch blow molding process", Polym. Eng. Sci., 47, 289 (2007).
Hedia, Hassan S., Saad Aldousari, and Fouad Bin Zager, "Optimal Design for PET Bottle to Maximize Reliability", Mater Test., 52, 383 (2010).
Kim Jeong-Soon, "Study on Preform Design for Reducing Weight of PET Packaging Bottle", J. Korea Acad. Ind. Coop. Soc., 11, 1 (2010).
Zhong, Weiwei, Yusi Tan, and Chao Lv, "The Influence of Preform Design on the Thickness Distribution of Polyethylene Terephthalate Bottles", Adv. Sci. Lett., 12, 100 (2012).
Daver, Fugen, and B. I. L. A. L. Demirel, "A simulation study of the effect of preform cooling time in injection stretch blow molding", J. Mater. Process. Technol., 212, 2400 (2012).
S. H. Shin, H. S. Choi, E. C. Jeong, J. E. Son, M. A. Kim, K. H. Yoon, and S. H. Lee, "A Study of the Effects of Thickness Variation of Product by using Polymer Core", J. Korean Soc. Precis. Eng., 646 (2018).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.