김태훈
(Spatial Information Quality Management Service)
,
이재호
(Spatial Information Quality Management Service)
,
김도선
(Spatial Information Quality Management Service)
,
이석배
(Department of Civil Engineering, Gyeongnam National University of Science and Technology)
연구목적: 기존의 인력에 의한 안전점검은 기술자의 안전이 우려되거나 접근이 어려워, 평가 및 데이터 확보에 한계가 있었고, 시설물의 노후화로 유지관리 대상이 증가함에 따라 더욱더 큰 문제가 되고 있다. 드론 기술이 발전하면서 외관조사에 이를 활용할 경우, 인력의 안전 보장, 시각적 데이터 확보, 신속한 점검 진단이 가능하며, 최근 드론에 의한 시설물 안전점검이 일부 도입되는 등 활용도가 높아지고 있다. 활용성을 보다 강화하기 위해서는 드론에 의한 시설물 외관조사의 대가기준이 필요하다고 판단되며, 본 논문에서는 댐을 대상으로 연구를 수행하였다. 연구방법:품셈 산출을 위해 기존 국내 안전점검 및 드론관련 대가기준을 조사하고, 드론을 활용한 안전점검 관련 절차를 비교분석하여 작업 절차 및 공종에 대하여 검토하였다. 또한 실제 댐에 대한 드론 촬영 및 입면정사영상 제작을 통해 실증 자료를 수집하였다. 연구결과: 드론을 활용한 시설물 안전점검을 위한 작업공종을 도출하였고, 작업공종에 따라 두 개의 댐을 대상으로 실증조사결과를 수집하였으며, 이를 바탕으로 댐기준시설물 규격 기준으로 품셈 안을 도출하였다. 시설물의 구조형식별, 규격별 조정비는 기존 지침을 적용하고, 기상기준점측량이 필요한 경우 건설공사표준품셈의 무인비행장치측량의 품을 적용하도록 하였다. 결론:드론을 활용한 외관조사 시 GSD를 세밀하게 할수록 촬영 사진 수가 크게 증가하여, 대가기준을 산출을 위한 보정으로 조정비 개념을 적용하였다. 더불어 안전거리 유지를 위해서는 최대 GSD가 한계를 나타내는 문제점도 고려해야 함을 알 수 있었다.
연구목적: 기존의 인력에 의한 안전점검은 기술자의 안전이 우려되거나 접근이 어려워, 평가 및 데이터 확보에 한계가 있었고, 시설물의 노후화로 유지관리 대상이 증가함에 따라 더욱더 큰 문제가 되고 있다. 드론 기술이 발전하면서 외관조사에 이를 활용할 경우, 인력의 안전 보장, 시각적 데이터 확보, 신속한 점검 진단이 가능하며, 최근 드론에 의한 시설물 안전점검이 일부 도입되는 등 활용도가 높아지고 있다. 활용성을 보다 강화하기 위해서는 드론에 의한 시설물 외관조사의 대가기준이 필요하다고 판단되며, 본 논문에서는 댐을 대상으로 연구를 수행하였다. 연구방법:품셈 산출을 위해 기존 국내 안전점검 및 드론관련 대가기준을 조사하고, 드론을 활용한 안전점검 관련 절차를 비교분석하여 작업 절차 및 공종에 대하여 검토하였다. 또한 실제 댐에 대한 드론 촬영 및 입면정사영상 제작을 통해 실증 자료를 수집하였다. 연구결과: 드론을 활용한 시설물 안전점검을 위한 작업공종을 도출하였고, 작업공종에 따라 두 개의 댐을 대상으로 실증조사결과를 수집하였으며, 이를 바탕으로 댐기준시설물 규격 기준으로 품셈 안을 도출하였다. 시설물의 구조형식별, 규격별 조정비는 기존 지침을 적용하고, 기상기준점측량이 필요한 경우 건설공사표준품셈의 무인비행장치측량의 품을 적용하도록 하였다. 결론:드론을 활용한 외관조사 시 GSD를 세밀하게 할수록 촬영 사진 수가 크게 증가하여, 대가기준을 산출을 위한 보정으로 조정비 개념을 적용하였다. 더불어 안전거리 유지를 위해서는 최대 GSD가 한계를 나타내는 문제점도 고려해야 함을 알 수 있었다.
Purpose: Safety inspections by existing personnel have been limited in evaluation and data securing due to concerns about the safety of technicians or difficulty in accessing them, and are becoming a bigger problem as the number of maintenance targets increases due to the aging of facilities. As dro...
Purpose: Safety inspections by existing personnel have been limited in evaluation and data securing due to concerns about the safety of technicians or difficulty in accessing them, and are becoming a bigger problem as the number of maintenance targets increases due to the aging of facilities. As drone technology develops, it is possible to ensure the safety of personnel, secure visual data, and diagnose quickly, and use it is increasing as safety inspection of facilities by drones was introduced recently. In order to further enhance utilization, it is considered necessary to base a consideration standard for facility appearance investigation by drones, and in this paper, research was conducted on dams. Method: To calculate the quality, existing domestic safety inspection and drone-related consideration standards were investigated, and procedures related to safety inspection using drones were compared and analyzed to review work procedures and construction types. In addition, empirical data were collected through drone photography and elevation image production for the actual dam. Result: Work types for safety inspection of facilities using drones were derived, and empirical survey results were collected for two dams according to work types. The existing guidelines were applied for the adjustment ratios for each structural type and standard of the facility, and if a meteorological reference point survey was necessary, the unmanned aerial vehicle survey of the construction work standard was applied. Conclusion: The finer the GSD in appearance investigation using drones, the greater the number of photographs taken, and the concept of adjustment cost was applied as a correction to calculate the consideration standard. In addition, it was found that the problem of maximum GSD indicating limitations should be considered in order to maintain the safe distance.
Purpose: Safety inspections by existing personnel have been limited in evaluation and data securing due to concerns about the safety of technicians or difficulty in accessing them, and are becoming a bigger problem as the number of maintenance targets increases due to the aging of facilities. As drone technology develops, it is possible to ensure the safety of personnel, secure visual data, and diagnose quickly, and use it is increasing as safety inspection of facilities by drones was introduced recently. In order to further enhance utilization, it is considered necessary to base a consideration standard for facility appearance investigation by drones, and in this paper, research was conducted on dams. Method: To calculate the quality, existing domestic safety inspection and drone-related consideration standards were investigated, and procedures related to safety inspection using drones were compared and analyzed to review work procedures and construction types. In addition, empirical data were collected through drone photography and elevation image production for the actual dam. Result: Work types for safety inspection of facilities using drones were derived, and empirical survey results were collected for two dams according to work types. The existing guidelines were applied for the adjustment ratios for each structural type and standard of the facility, and if a meteorological reference point survey was necessary, the unmanned aerial vehicle survey of the construction work standard was applied. Conclusion: The finer the GSD in appearance investigation using drones, the greater the number of photographs taken, and the concept of adjustment cost was applied as a correction to calculate the consideration standard. In addition, it was found that the problem of maximum GSD indicating limitations should be considered in order to maintain the safe distance.
Kim, J.S. (2018). No. 130 Issues seen as indicators, National Assembly Research Service, Korea.
Korea Institute of Civil Engineering and Building Technology (2020). 2020 Standard Estimating System for Construction Work - Civil Engineering/Building/Mechanical Equipment. Korea.
Korea Land & Housing Corporation (2017). LH Research Report on the Establishment of an Unmanned Aerial Vehicle (drone) Utilization Plan. Korea.
Lee, S.B., Song, M.H., Kim, S.G., Won, J.H. (2020). "Change monitoring at expressway infrastructure construction sites using drone." Sensors and Materials, Special Issue on Geomatics Technologies for the Realization of Smart Cities, Vol. 32, No. 11, pp. 3923-3933.
Ministry of Land, Infrastructure and Transport, Guidelines for Safety and Maintenance of Facilities, Notice No. 2020 - 869, Ministry of Land, Infrastructure and Transport, Korea.
National Geographic Information Institute (2019). Development of Spatial Information Construction Technology Using Unmanned Aerial Vehicles and Research on Product Counting. Ministry of Land, Infrastructure and Transport, Korea.
Park, N.H., Hwang, Y.J., Ahn, Y.C. (2019). "A study on the development of a remote control drone for disaster response." Journal of the Korea Society of Disaster Information, Vol. 15, No. 4, pp. 578-589.
Seoul Metropolitan Government (2017). Facility Inspection Manual using Drone. Korea.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.