최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국주조공학회지 = Journal of Korea Foundry Society, v.41 no.5, 2021년, pp.419 - 433
오승환 (디알 액시온 기술연구소) , 친밧 문크대거 (부경대학교 대학원 금속공학과) , 김헌주 (부경대학교 금속공학과)
Al-Si-Cu alloys benefit from the addition of copper for better hardness and strength through precipitation hardening, which results in remarkably strong alloys. However, the addition of copper expands the solidification range of Al-Si-Cu alloys, and due to this, these alloys become more prone to hot...
Mohamed, S. S., Samuel, A. M. Doty, H. W. and et al., Inter. J. Metalcast, 14(1) (2020) 25.
J.G. Kaufman and E.L. Rooy, "Aluminum Alloy Castings", ASM International, OH (2004).
L. Dobrzanski, R. Maniara, M. Krupinski, and J. Sokolowski, J. Achives Mater. Manuf. Eng., 24 (2007) 51.
G. Mrowka-Nowotnik, J. Sieniawski and M. Wierzbinska, Archives Mater. Sci. Eng., 28(2) (2007) 69.
C. Caceres, M. Djurdjevic, T. Stockwell and J. Sokolowski, Scr. Mater., 42(5) (1999) 631.
Li, S. and Apelian D., Inter. J. Metalcast, 5(1) (2011) 23.
Li, S., Apelian, D. and Sadayappan, K. Inter. J. Metalcast, 6(1) (2012) 51.
Fiorese, E., Bonollo, F., Timelli, G. and et al., Inter. J. Metalcast, 9(1) (2015) 55.
B. K. Kang and I. Sohn, Metall. Mater. Trans., 49 (2018) 5137.
D. Cheng, L. Zhang, G. Wu, J. Mao and W. Liu, J. Mater. Res., 31(22) (2016) 1.
Chen, Y., Liu, Z., Liu, S. and et al., Inter. J. Metalcast, 15(1) (2021) 130.
Y. Li, Z. R. Zhang, Z. Y. Zhao, H. X. Li, L. Katgerman and J. S. Zhang, Metall. Mater. Trans. A, 50(8) (2019) 3603.
A. B. Phillion, S. L. Cockcroft, and P. D. Lee, Modelling Simul. Mater. Sci. Eng., 17(5) (2009).
Clyne, T. W. and Davies, G. J., Proceedings of the Conference on Solidification and Casting of metals, Metals Society, London (1979) 274.
Eskin, D.G., Suyitno and Katgerman, L., Prog. Mater. Sci., 49(5) (2004) 629.
Viano, D., St. John, D., Grandfield, J. and Caceres, C., Light Met., (2005) 895.
Davidson, C., Viano, D., Lu, L. St. John, D., Int. J. Cast Met. Res., 19 (2006) 59.
S. Instone, D. StJohn, and J. Grandfield, Int. J. Cast. Met. Res., 12(6) (2000) 441.
Nasresfahani, M.R. and Niroumand, B., Inter. J. Metalcast, 14(2) (2020) 538..
Uludag, M., Cetin, R., Dispinar, D and et al., Inter. J. Metalcast, 12(3) (2018) 589.
L. Backerud, G. Chai and J. Tamminen, "Foundry alloys - Vol.2", Skanaluminium, Norway (1990).
B. Akyuz, Advances in Science and Technology, 10(31) (2017) 51.
A. Meetsma, J.L. De Boer and S. Van Smaalen., J. Sol. State Chem., 83(2) (1989) 370.
M. Djurdjevic, W. Kasprzak, C. Kierkus, W. Kierkus and J. Sokolowski, AFS Trans., 16, (2001), 1.
M.B. Djurdjevic, J. Sokolowski, W.T. Kierkus, and G.E. Byczynski, Mater. Sci. Forum Trans. Tech. Publ., 539-543 (2007) 299.
Mehta, M. C., Mandal, D. & Chaudhury, S. K., Inter. J. Metalcast, 14(4) (2020) 987.
Zeng, X., Ferguson, C., Sadayappan, K and et al., Inter. J. Metalcast, 12(3) (2018) 457.
N. L. Veldman, A.K. Dahle, D.H. StJohn and L. Arnberg, Metall. and Mater. Trans. A, 32(1) (2001) 147.
J. Williams, and A. Singer, J. Inst. Metal., 96 (1968) 5.
E. H. Lee, and P.S. Symonds, Plasticity; proceedings of the second symposium on naval structural mechanics, elsevier, amsterdam (2013).
E. O. Orowan, Fundamentals of brittle behavior of Metals, Murray WM. (1950).
D. Liu, H.V. Atkinson and H. Jones, Acta Mater., 53(14) (2005) 3807.
M.A.M. Arif, M.Z. Omar, Z. Sajuri, and M.S. Salleh, Trans. Non. Ferr. Metal. Soc. China, 30(2) (2020) 275.
M.S. Salleh, M.Z. Omar, J. Syarif, K.S. Alhawari, and M.N. Mohammed, Appl. Mech. and Mater., 548 (2014) 237.
J. Campbell, "Castings 2nd ed.", Butterworth-Heinemann Ltd., oxford (2003).
Flemings, M.C., Solidification Processing. Metallurgical Transactions, 5 (1974) 2121-2134.
A. B. Phillion, S. L. Cockcroft and P. D. Lee, Modelling Simul. Mater. Sci. Eng., 17(5) (2009).
Clyne, T.W. and G.J. Davies, Solidification and casting of metals. Proc. Conf. on Solidifiation and Casting Metals, (1979) 275.
Pellini, W., Foundry, 80 (1952) 125.
Dodd, R., Foundry Trade Journal, 101 (1956) 1.
S. A. Metz, and M.C. Flemings, "Fundamental Study of Hot Tearing", American Foundrymen's Society, IL (1970).
N. Tenekedjiev, H. Mulazimoglu, B. Closset and J. Gruzleski, American Foundrymen's Society, IL (1995) 32.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.