최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.10, 2021년, pp.27 - 37
백선호 (조선대학교 기계공학과) , 이광규 (조선대학교 기계공학과) , 안동규 (조선대학교 기계공학과) , 김우성 (한국생산기술연구원 스마트제조기술연구그룹) , 이호진 (한국생산기술연구원 스마트제조기술연구그룹)
The use of additive manufacturing processes for the repair and remanufacturing of mechanical parts has attracted considerable attention because of strict environmental regulations. Directed energy deposition (DED) is widely used to retrofit mechanical parts. In this study, finite element analyses (F...
Wahab, D. A., & Azman, A. H., "Additive Manufacturing for Repair and Restoration in Remanufacturing: An Overview from Object Design and Systems Perspectives, Processes", Processes, Vol. 7, No. 11, pp. 802, 2019.
Saboori, A., Abersa, A., Marchese, G., Biamino, S., Lombardi, M. and Fino, P., "Application of Directed Energy Deposition-based Additive Manufacturing in Repair," Applied sciences, Vol. 9, No. 16, pp. 3316, 2019.
Kim, B. S., Kim, J. S., Lee, S. H., Song, J. Y., Park, H. Y., "A Study on Failure Mode Analysis of Machining Center", Journal of the Korean Society for Precision Engineering, Vol. 18, No. 6, pp. 74-79, 2001.
Ahn, D. G., "Directed Energy Deposition (DED) Process: State of the Art", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 8, No. 2, pp. 703-742, 2021.
Liu, R., Wang, Z., Sparks, T., Liou, F., & Newkirk, J., "Aerospace Applications of Laser Additive Manufacturing," Laser Additive Manufacturing, pp. 351-371, 2017.
Ahn, D. G., "Direct Metal Additive Manufacturing Processes and Their Sustainable Applications for Green Technology: A Review", International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 3, No. 4, pp. 381-395, 2016.
Pinkerton, A. J., Wang, W., Li, L., "Component Repair Using Laser Direct Metal Deposition," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 222, No. 7, pp. 827-836, 2008.
Yang, Y., Gong, Y., Qu, S., Xin, B., Xu, Y., Qi, Y., "Additive/subtractive Hybrid Manufacturing of 316L Stainless Steel Powder: Densification, Micro-hardness and Residual Stress," Journal of Mechanical Science and Technology, Vol. 33, No. 12, pp. 5797-5807., 2019.
Yong. Y., Fu. W., Deng. Q., Chen. D., "A Comparative Study of Vision Detection and Numerical Simulation for Laser Cladding of Nickel-Based Alloy," Journal of Manufacturing Processes, Vol. 28, pp. 364-372, 2017.
Chua. B. L., Lee. H. J., Ahn. D. G., Kin. J. G., "Investigation of Penetration Depth and Efficiency of Applied Heat Flux in a Directed Energy Deposition Process with Feeding of Ti-6Al-4V Wires," Journal of the Korean Society for Precision Engineering, Vol. 35, 2018.
Chua, B. L., Ahn, D. G., "Estimation Method of Interpass Time for the Control of Temperature during a Directed Energy Deposition Process of a Ti-6Al-4V Planar Layer," Materials, Vol. 13, pp. 418, 2020.
Lee, K. K., Ahn, D. G., "Investigation into Transient Heat Transfer Characteristics during Mulit-beads Deposition Using a DED Process," Korean Soc. Mech. Eng., Vol. 45, No. 4, pp. 301~309, 2021.
SYSWELD, https://www.esi-group.com/products/welding-assembly (accessed 2, June., 2019)
JMatPro, https://www.sentesoftware.co.uk/jmatpro (accessed 24, Aug., 2019)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.