참고문헌 (19)

1. Dipesh, P., Suela, K. and Basudeb, S., "Green Process Engineering as the Key to Future Processes," Processes, Vol. 2, No. 1, pp. 311-332, 2014. 

   상세보기

2. Nurhasyimah, A. A., Nur, A. A. A., Dzuraidah, A. W. and Abdul, H. A., "Component design optimisation based on artificial intelligence in support of additive manufacturing repair and restoration : Current status and future outlook for remanufacturing," Journal of Cleaner Production, Vol. 296, 2021. 

   상세보기

3. Kim, D. A., Lee, K. K. and Ahn, D. G., "Investigation into the Effect of Process Parameters of DED Process on Deposition and Residual Stress Characteristics for Remanufacturing of Mechanical Parts," Transactions of Materials Processing, Vol. 30, No. 3, pp. 109-118, 2021. 

4. Wahab, D. A. and Azman, A. H., "Additive Manufacturing for Repair anLRemanufacturing: An Overview from Object Design and Systems Perspectives," Process, Vol. 7, No. 11, 2019, Article 802. 

5. Anand, K. S., Rajkumar, V., Nagesha, B. K., Amit, K. T., Sanjay, B. and Suresh, T. N., "Single crystal metal deposition using laser additive manufacturing technology for repair of aero-engine components," Mater. Today: Proc., Vol. 45, No. 6, pp. 5395-5399, 2021. 

6. Lee, K. K., Ahn, D. G., Kim, W. S. and Lee, H. J., "A study on the Heat Transfer Characteristics of Single Bead Deposition of Inconel 718 Superalloy on S45C Structural Steel Using a DMT Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 19, No. 8, pp. 56-63, 2020. 

7. Ahn, D. G., "Direct Metal Additive Manufacturing Process and Their Sustainable Applications for Green Technology: A Review," Int. J. of Precis. Eng. and Manuf.-Green Tech., Vol. 3, No. 4, pp. 381-395, 2016. 

8. Hwang, A. J., Lee, K. K. and Ahn, D. G., "Investigation of Residual Stress Characteristics of Specimen Fabricated by DED and Quenching Process Using Thermo-mechanical Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 20, No. 12, pp. 113-122, 2021. 

9. Baek, S. H., Lee, K. K., Ahn, D. G., Kim, W. S. and Lee, H. J., "Influence of Substrate Phase and Inclination Angle on Heat Transfer Characteristics in Vicinity of Hastelloy X Regions Depositited on S45C via Directed Energy Deposition," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 20, No. 10, pp. 27-37, 2021. 

10. Remesh, R., Muthukannan, D., Vijay, P., Shweta V. and Rajendran, R., "Microstructural and mechanical characterication of Ti6Al4V refurbished parts obtained by laser metal deposition," Materials Science and Engineering, Vol. 643, No. 3, pp. 64-71, 2015. 

11. Xu, L., Cao, H., Liu, H. and Zhang, Y., "Study on laser cladding remanufacturing process with FeCrNiCu alloy powder for thin-wall impeller blade," The International Journal of Advanced Manufacturing Technology, Vol. 90, pp. 1383-1392, 2017. 

    상세보기

12. Lijun, S., Guangcheng, Z., Hui, X., Xianfeng, X. and Simeng, L., "Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders," Journal of Manufacturing Processes, Vol. 24, No. 1, pp. 116-124, 2016. 

    상세보기

13. Paydas, H., Mertens, A., Lecome-Beckers, J. and Tchoufang, T. J., "Laser cladding as repair technology for Ti-6Al-4V alloy: Influence of building strategy on microstructure and hardness," Materials & Design, Vol. 85, pp. 497-510, 2015. 

14. Fabian, S., Yunong, L., Dominik, K., Sergei, E. and Konrad, W., "Laser Remelting Process Simulation and Optimization for Additive Manufacturing of Nickel-Based Super Alloys," Materials, Vol. 15, No. 7, pp. 1-15, 2022, Article 177. 

15. Lee, Y. S., Lee, M. K., Sung, J. H., Hong, M. P., Son, Y., An, S., Jeong, O, C. and Lee, H. J., "A Study on the Method and Application of Shaft Repair using Directed Energy Deposition Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 20, No. 9, pp. 1-10, 2021. 

16. Kim, H., "A Study on Residual Stress Characteristics Dependent on the Deposition Strategy in a Large Volume Deposition of Inconel 718 Using a DED Process," Master Course Thesis, Chosun University, Republic of Korea, pp. 23, 2021. 

17. Chua, B. L., "Investigation of Development of Thermo-Mechanical Analysis Method for a Wire Feeding Type Directed Energy Deposition Process," Ph.D. Thesis, Chosun University, Republic of Korea, pp. 92-98, 2019. 

18. Sente Software, 2001, JmatPro®, Sente Software Ltd., Guildford, UK (accessed June 2, 2019). 

19. ESI-Group, 1973, SYSWELD, Paris, France (accessed July 9, 2021). 

저자의 다른 논문 :

안동규 (84)