최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.10, 2021년, pp.9 - 18
구병문 (한화디펜스 (주)) , 김태호 (티엔에스머시닝) , 박정수 (한화디펜스 (주))
The cutting force in a cutting simulation is determined by the cutting conditions, such as cutting speed, feed rate, and depth of cut. The cutting force changes, depending on the material and cutting conditions, and is affected by the heat generated during cutting. The physical properties for predic...
Shin, H. H., Kim, J. B., "A Phenomenological Constitutive Equation to Describe Various Flow Stress Behaviors of Materials in Wide Strain Rate and Temperature Regimes", Journal of Engineering Materials and Technology, Vol. 132 pp. 1-6, 2010.
Shrot, A., Baker, M., "Determination of Johnson-Cook Parameter from Machining Simulation", Computational Material Science, Vol. 52, No. 1, pp. 298-304, 2012.
Ahn, K. W., Kim, D. H., Kim, T. H., Jeon, E. C., "Determination and Verification of Flow Stress of Low-alloy Steel Using Cutting Test", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5, pp. 50-56, 2014.
Shatla, M., Kerk, C., Altan, T., "Process Modeling in Machining. Part I: Determination of Flow Stress Data", International Journal of Machine Tools and Manufacture, Vol. 41, No. 10, pp. 1511-1534, 2001.
Agmell, M., Ahadi, A., Stahl, J. E., "A Fully Coupled Thermomechanical Two-dimensional Simulation Model for Orthogonal Cutting: Formulation and Simulation", Journal of Engineering Manufacture, Vol. 223, No. 10, pp. 1735-1745, 2011.
Ku, B. M., Kim, T. H., Jeon, E. C., "Effects of Friction Coefficient and Mesh Change on Cutting Force and Chip Shape in Cutting Simulation", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 28, No. 3, pp. 148-155, 2019.
Koo, J. Y., Cho, M. H., Kim, H., Kim, J. S., "Investigation of Cutting Conditions for Stable Machining and Machinability Evaluation in Milling Process of Al7050-T7451 by Response Surface Methodology", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 23, No. 3, pp. 284-290, 2014.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.