참고문헌 (22)

1. Dilberoglu, U. M., Gharehpapagh, B., Yaman, U. and Dolen, M., "The Role of Additive Manufacturing in the Era of Industry 4.0," Procedia Manufacturing, Vol. 11, 2017, pp. 545~554. 

   상세보기

2. An, Y. S., "Structural characteristics and development direction of the domestic aircraft parts industry," The Journal of Aerospace Industry, 1995, pp. 29~55. 

3. Wagner, S. M. and Walton, R. O., "Additive manufacturing's impact and future in the aviation industry," Production Panning & Control, Vol. 27, No. 13, 2016, pp. 1124~1130. 

4. Najmon, J. C., Raeisi, S. and Tovar, A., "Review of additive manufacturing technologies and applications in the aerospace industry," Additive Manufacturing for the aerospace industry, 2019, pp. 7~31. 

5. Li, C., Liu, Z. Y., Fang, X. Y. and Guo, Y. B., "Residual stress in metal additive manufacturing," Procedia Cirp, Vol. 71, 2018, pp. 348~353. 

   상세보기

6. Chen, Q., Liu, J., Liang, X. and To, A. C., "A level-set based continuous scanning path optimization method for reducing residual stress and deformation in metal additive manufacturing," Computer Methods in Applied Mechanics and Engineering, Vol. 360, 2020, 112719. 

   상세보기

7. Wu, A. S., Brown, D. W., Kumar, M., Gallegos, G. F. and King, W. E., "An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel," Metallurgical and Materials Transactions A, Vol. 45, No. 13, 2014, pp. 6260~6270. 

8. Baumers, M. and Hlweg, M., "On the economics of additive manufacturing: Experimental findings," Journal of Operations Management, Vol. 65, No. 8, 2019, pp. 794~809. 

   상세보기

9. Prashanth, K. G., Scudino, S., Maity, T., Das, J. and Eckert, J., "Is the energy density a reliable parameter for materials synthesis by selective laser melting?," Materials Research Letters, Vol. 5, No. 6, 2017, pp. 386~390. 

   상세보기

10. Jung, H. Y., Choi, S. J., Prashanth, K. G., Stoica, M., Scudino, S., Yi, S., Kuhn, U., Kim, D. H., Kim, K. B. and Eckert, J., "Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study," Materials & Design, Vol. 86, 2015, pp. 703~708. 

11. Tan, C., Zhou, K., Ma, W., Attard, B., Zhang, P. and Kuang, T., "Selective laser melting of high-performance pure tungsten: parameter design, densification behavior and mechanical properties," Science and Technology of advanced MaTerialS, Vol. 19, No. 1, 2018, pp. 370~380. 

    상세보기

12. Cordova, L., Campos, M. and Tinga, T., "Revealing the effects of powder reuse for selective laser melting by powder characterization," Jom, Vol. 71, No. 3, 2019, pp. 1062~1072. 

    상세보기

13. Ghods, S., Schultz, E., Wisdom, C., Schur, R., Pahuja, R., Montelione, A., Aroal, D. and Ramulu, M., "Electron beam additive manufacturing of Ti6Al4V: Evolution of powder morphology and part microstructure with powder reuse," Materialia, Vol. 9, 2020, 100631. 

    상세보기

14. Santecchia, E., Spigarelli, S. and Cabibbo, M., "Material reuse in laser powder bed fusion: Side effects of the laser-metal powder interaction," Metals, Vol. 10, No. 3, 2020, p. 341. 

    상세보기

15. Bolzoni, L., Herraiz, E., Ruiz-Navas, E. M. and Gordo, E., "Study of the properties of low-cost powder metallurgy titanium alloys by 430 stainless steel addition," Materials & Design, Vol. 60, 2014, pp. 628~636. 

    상세보기

16. Akino, K. and Kakehi, K., "Strengths and microstructure of SUS316L fabricated by selective laser melting," Materials transactions, Vol. 59, No. 3, 2018, pp. 482~487. 

    상세보기

17. Yusuf, S. M. and Gao, N., "Influence of energy density on matallurgy and properties in metal additvie manufacturing," Materials Science and Technology, Vol. 33, No. 11, 2017, pp. 1269~1289. 

18. Bertoli, U. S., Wolfer, A. J., Matthews, M. J., Delplanque, J. P. R. and Schoenung, J. M., "On the limitations of volumetric energy density as a design parameter for selective laser melting," Materials & Design, Vol. 113, 2017, pp. 331~340. 

    상세보기

19. Fan, K. C., Fei, Y. T., Yu, X. F., Chen, Y. J., Wang, W. L., Chen, F. and Liu, Y. S., "Development of a low cost micro-CMM for 3D micro/nano measurements," Measurement Science and Technology, Vol. 17, No. 3, 2006, p. 524. 

    상세보기

20. Yilmazkaya, E. and Ozcelik, Y., "The effects of operational parameters on a mono-wire cutting system: efficiency in marble processing," Rock Mechanics and Rock Engineering, Vol. 49, No. 2, 2016, pp. 523~539. 

    상세보기

21. Tang, H. P., Qian, M., Liu, N., Zhang, X. Z., Yang, G. Y. and Wang, J., "Effect of powder reuse times on additive manufacturing of Ti-6Al-4V by selective electron beam melting," Jom, Vol. 67, No. 3, 2015, pp. 555~563. 

    상세보기

22. Ardila, L. C., Garciandia, F., Gonzalez-Diaz, J. B., Albarez, P., Echeverria, A., Petite, M. M., Deffley, R. and Ochoa, J., "Effect of IN718 recycled powder reuse on properties of parts manufactured by means of selective laser melting," Physics Procedia, Vol. 56, 2014, pp. 99~107. 

    상세보기

저자의 다른 논문 :

김정호 (10)