최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국항공우주학회지 = Journal of the Korean Society for Aeronautical & Space Sciences, v.50 no.4, 2022년, pp.223 - 231
김민수 (Inha University) , 김지윤 (Inha University) , 박은교 (Inha University) , 김태민 (Inha University) , 조진연 (Inha University) , 김정호 (Inha University)
Residual stress that can occur during the metal additive manufacturing process is an important factor that must be properly controlled for the precise production of metal parts through 3D printing. Therefore, in this study, the factors affecting these residual stresses were investigated using an exp...
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U. and Dolen, M., "The Role of Additive Manufacturing in the Era of Industry 4.0," Procedia Manufacturing, Vol. 11, 2017, pp. 545~554.
An, Y. S., "Structural characteristics and development direction of the domestic aircraft parts industry," The Journal of Aerospace Industry, 1995, pp. 29~55.
Wagner, S. M. and Walton, R. O., "Additive manufacturing's impact and future in the aviation industry," Production Panning & Control, Vol. 27, No. 13, 2016, pp. 1124~1130.
Najmon, J. C., Raeisi, S. and Tovar, A., "Review of additive manufacturing technologies and applications in the aerospace industry," Additive Manufacturing for the aerospace industry, 2019, pp. 7~31.
Li, C., Liu, Z. Y., Fang, X. Y. and Guo, Y. B., "Residual stress in metal additive manufacturing," Procedia Cirp, Vol. 71, 2018, pp. 348~353.
Chen, Q., Liu, J., Liang, X. and To, A. C., "A level-set based continuous scanning path optimization method for reducing residual stress and deformation in metal additive manufacturing," Computer Methods in Applied Mechanics and Engineering, Vol. 360, 2020, 112719.
Wu, A. S., Brown, D. W., Kumar, M., Gallegos, G. F. and King, W. E., "An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel," Metallurgical and Materials Transactions A, Vol. 45, No. 13, 2014, pp. 6260~6270.
Baumers, M. and Hlweg, M., "On the economics of additive manufacturing: Experimental findings," Journal of Operations Management, Vol. 65, No. 8, 2019, pp. 794~809.
Prashanth, K. G., Scudino, S., Maity, T., Das, J. and Eckert, J., "Is the energy density a reliable parameter for materials synthesis by selective laser melting?," Materials Research Letters, Vol. 5, No. 6, 2017, pp. 386~390.
Jung, H. Y., Choi, S. J., Prashanth, K. G., Stoica, M., Scudino, S., Yi, S., Kuhn, U., Kim, D. H., Kim, K. B. and Eckert, J., "Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study," Materials & Design, Vol. 86, 2015, pp. 703~708.
Tan, C., Zhou, K., Ma, W., Attard, B., Zhang, P. and Kuang, T., "Selective laser melting of high-performance pure tungsten: parameter design, densification behavior and mechanical properties," Science and Technology of advanced MaTerialS, Vol. 19, No. 1, 2018, pp. 370~380.
Cordova, L., Campos, M. and Tinga, T., "Revealing the effects of powder reuse for selective laser melting by powder characterization," Jom, Vol. 71, No. 3, 2019, pp. 1062~1072.
Ghods, S., Schultz, E., Wisdom, C., Schur, R., Pahuja, R., Montelione, A., Aroal, D. and Ramulu, M., "Electron beam additive manufacturing of Ti6Al4V: Evolution of powder morphology and part microstructure with powder reuse," Materialia, Vol. 9, 2020, 100631.
Santecchia, E., Spigarelli, S. and Cabibbo, M., "Material reuse in laser powder bed fusion: Side effects of the laser-metal powder interaction," Metals, Vol. 10, No. 3, 2020, p. 341.
Bolzoni, L., Herraiz, E., Ruiz-Navas, E. M. and Gordo, E., "Study of the properties of low-cost powder metallurgy titanium alloys by 430 stainless steel addition," Materials & Design, Vol. 60, 2014, pp. 628~636.
Akino, K. and Kakehi, K., "Strengths and microstructure of SUS316L fabricated by selective laser melting," Materials transactions, Vol. 59, No. 3, 2018, pp. 482~487.
Yusuf, S. M. and Gao, N., "Influence of energy density on matallurgy and properties in metal additvie manufacturing," Materials Science and Technology, Vol. 33, No. 11, 2017, pp. 1269~1289.
Bertoli, U. S., Wolfer, A. J., Matthews, M. J., Delplanque, J. P. R. and Schoenung, J. M., "On the limitations of volumetric energy density as a design parameter for selective laser melting," Materials & Design, Vol. 113, 2017, pp. 331~340.
Fan, K. C., Fei, Y. T., Yu, X. F., Chen, Y. J., Wang, W. L., Chen, F. and Liu, Y. S., "Development of a low cost micro-CMM for 3D micro/nano measurements," Measurement Science and Technology, Vol. 17, No. 3, 2006, p. 524.
Yilmazkaya, E. and Ozcelik, Y., "The effects of operational parameters on a mono-wire cutting system: efficiency in marble processing," Rock Mechanics and Rock Engineering, Vol. 49, No. 2, 2016, pp. 523~539.
Tang, H. P., Qian, M., Liu, N., Zhang, X. Z., Yang, G. Y. and Wang, J., "Effect of powder reuse times on additive manufacturing of Ti-6Al-4V by selective electron beam melting," Jom, Vol. 67, No. 3, 2015, pp. 555~563.
Ardila, L. C., Garciandia, F., Gonzalez-Diaz, J. B., Albarez, P., Echeverria, A., Petite, M. M., Deffley, R. and Ochoa, J., "Effect of IN718 recycled powder reuse on properties of parts manufactured by means of selective laser melting," Physics Procedia, Vol. 56, 2014, pp. 99~107.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.