[논문]설문조사를 통한 스마트 건설안전기술의 실태분석 및 활성화 방안에 대한 연구

김용선; 오태근; 김춘상; 이나은; 홍창수; 이상영; 윤영근

doi:10.14346/jkosos.2022.37.1.30

설문조사를 통한 스마트 건설안전기술의 실태분석 및 활성화 방안에 대한 연구
A Study on the Actual Condition Analysis and Activation Plan of Smart Construction Safety Technology by the Survey 원문보기

한국안전학회지 = Journal of the Korean Society of Safety, v.37 no.1, 2022년, pp.30 - 40

김용선 (인천대학교 안전공학과) , 오태근 (인천대학교 안전공학과) , 김춘상 ((주)휴랜) , 이나은 (한국산업안전보건공단 미래전문기술원) , 홍창수 (한국산업안전보건공단 미래전문기술원) , 이상영 (한국산업안전보건공단 미래전문기술원) , 윤영근 (인천대학교 안전공학과)

Abstract ▼ AI-Helper

The death rate in the construction industry, which is more than twice that of other industries, increases the need to solve chronic safety problems. In a situation in which the safety management measures that have been maintained thus far are unable to reduce construction accidents, the introduction of smart construction safety technology (SCST) that reflects the 4th industrial technology is required for the safety management of workers. Large corporations or public institutions have introduced SCST and are operating pilot sites, but SCST is still in its infancy and there have yet to exist field data regarding necessity and effectiveness. In this study, the concept of SCST, which has still to be established, is defined, and the actual condition of SCST was analyzed through a survey. Through the analysis of the necessity of SCST introduction, convenience, and effectiveness before and after its application, problems such as problems from the field point of view as well as other factors hindering the introduction of such technology are derived in detail. In addition, an effective combination of technologies for safety management at the current level is determined and an activation plan is presented.

주제어

표/그림 (23)

그림 Fig. 1. Images of smart construction safety equipment.
표 Table 1. Overseas Smart Construction Safety Technology
표 Table 2. Classification by type of smart construction safety equipment
그림 Fig. 2. Purpose of introducing smart construction safety technology.
그림 Fig. 3. Necessity by type of smart construction safety technology.
표 Table 3. Summary of major items in the survey
그림 Fig. 4. Expected performance of using smart construction safety technology.
그림 Fig. 5. Activation plan for smart construction safety technology.
표 Table 4. Effectiveness of Smart Construction Safety Technology by Type
그림 Fig. 6. Smart construction safety technology in use at construction sites.
그림 Fig. 7. Awareness ranking for smart construction safety technology.
그림 Fig. 8. The necessity of introducing smart construction safety technology.
그림 Fig. 9. Necessity according to the use of smart construction safety technology.
그림 Fig. 10. Purpose of use of smart construction safety technology.
그림 Fig. 11. Reasons for rejecting smart construction safety technology.
표 Table 5. Measures for dissemination of smart construction safety technology
표 Table 6. Convenience of the before and after application for smart construction safety technology
표 Table 7. Effectiveness of the before and after application for smart construction safety technology
표 Table 8. Performance on change in workers' behavior with smart construction safety technology
표 Table 9. On-site problem-solving performance with smart construction safety technology
표 Table 10. Effectiveness of occupational accident reduction with smart construction safety technology
표 Table 11. Activation plan of smart construction safety technology
표 Table 12. Activation plan of smart construction safety technology

참고문헌 (7)

KOSHA, Industrial Accident Statistics 2020, 2021
Ministry of Land, Infrastructure and Transport, "Smart Construction Technology Roadmap", 2018.
Ministry of Land, Infrastructure and Transport, "Smart Construction Technology Development Project", 2019.
S. M. Moon and Y. S. Kim, "Smart Construction Technology Development Project (R&D) Status, Construction Engineering and Management", Vol. 19, No. 6, pp. 33-36, 2018.
H. S. So, M. S. Seol, I. Y. Maeng, K, S. Park and J. K. Park, "A Study on the Factors Effecting the Role Stress of Safety Managers due to the Introduction of Smart Construction Safety Technology", J. Korean Soc. Saf., Vol. 36, No. 4, pp. 54-61, 2021.
T. L. Saaty, "Decision Making for Leaders", RWS Publications. 1995.
J. M. Kim, J. B. Lee and S. R. Chang, "Risk Level Analysis of Architectural Work using AHP", J. Korean Soc. Saf., Vol. 32, No. 5, pp. 96-102, 2017.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증