최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국가스학회지 = Journal of the Korean institute of gas, v.26 no.2, 2022년, pp.21 - 26
염광욱 (한양사이버대학교 기계자동차공학부)
Since the four-wheel drive transmits the driving force to all four wheels, the traction with the road surface increases, thereby increasing the driving force. However, it has the disadvantage of lowering fuel efficiency. Therefore, four-wheel drive is commonly used as a method of converting to optio...
Kim, M. H., Qin, Z., Lee, K. H., Zhang, Q., and Lyu, S. K., "A Study on the Design of Rear Wheel Drive Reducer for Electric Vehicle", Journal of the Korean Society for Precision Engineering, 35(6), 571-577, (2018)
Kwon, H. S., "Assemblability Analysis of Kinematic Configurations of Front-Wheel Drive Automatic Transmissions" Journal of the Korean Society of Manufacturing Process Engineers, 18(11), 24-34, (2019)
Jeong, J. R., Kim, H. K., Kim, K. Y., Lim, W. S., and Cha, S. W., "Evaluation of Fuel Economy and Performance for 2WD and 4WD Hybrid Electric Vehicle Based on Backward Simulation", Transactions of KSAE, 22(1) 174-182, (2014)
Kim, Y. D., "Driveline Vibration Reduction of FR (front engine rear wheel drive) Vehicle at Rapid Acceleration", Trans. Korean Soc. Noise Vib. Eng, 24(8) 592-599, (2014)
Kim, H. D., and Choi, G. J., "Integrated Chassis Control System of a Rear In-wheel Motor Vehicle", Transactions of KSAE, 24(4) 439-446, (2016)
Han, K. S., and Park, G. S., "Lateral Motion Control of Electronic-Four-Wheel Drive Vehicles for Enhancement of Cornering Performance", Transactions of KSAE, 28(9), (2020)
Kwon, J. H., and Oh T. L., "An Experimental Study on a Full Time Four Wheel Drive Vehicle", Transactions of KSAE, 7(2), 242-252, (1999)
Jang, J. H., Kim, C. J., Kim, S. H., Kang, M. S., Back, S. H., Kim, Y. S., and Han, C. S., "Improvement of the Yaw Motion for Electric Vehicle Using Independent Front Wheel Steering and Four Wheel Driving", Journal of Institute of Control, Robotics and Systems, 19(1) 45-55, (2013)
Cho, H. D., "Development of Loader with Four Wheel Driving and Four-Type Wheel Steering System", Journal of the Korean Society of Manufacturing Process Engineers, 3(3), 71-7849, (2004)
Kim, J. A., and Jun, J. U., "A Study on the Development of Limited Slip Differential on All Terrain Vehicle", Journal of the Korean Society of Manufacturing Process Engineers, 10(1), 8-15, (2011)
Kim, J. G., Park, Y. J., Lee, G. H., Oh, J. Y., and Kim, Y. J., "A Study on the Load Sharing among Planet Gears according to the Phase of Carrier Pinhole Position Error in the Planetary Gearbox", Journal of the Korean Society for Precision Engineering, 34(6), 377-382, (2017)
Youm, K. W., "Study on the Shift Characteristics of a 2speed Manual Transmission apply to V-Blet", KIGAS, 24(6), 55-60, (2020)
Sim, K. J., Moon, H. J., Choi, G. J., Koh, S. K., and Jeon, N. J., "Bending Stress Analysis of the Transfer Case Helical Gear for the 3.5 Ton Commercial Vehicle", Transactions of KSAE, 25(4), 474-480, (2017)
Lee, W. K., and Park, S. M., "A Study on the Embodiment of a Transfer Case with High-Speed Reduction of the Planetary Gear Type Applied to Big Industrial Vehicles", Journal of the Korean Society of Manufacturing Process Engineers, 14(6), 14-20, (2015)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.