최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.21 no.2, 2022년, pp.46 - 53
양성규 (경상국립대학교 제어계측공학과) , 김갑순 (경상국립대학교 제어계측공학과)
This paper presents the design and manufacture of a Solid State Relay (SSR) life prediction device that can predict the lifetime of an SSR, which is a key component of a glass forming machine. The lifetime of an SSR is over when the current supplied to the relay is overcurrent (20 A or higher), and ...
Baek, S. Y., Lee, H. D., Kim, S. C. and Lee, E. S., "Development of intelligent grinding system for aspherical surface machining," The Korean Society of Mechanical Engineers, pp. 1099-1104, 2004.
Suzuki, H., Kodera, S., Maekawa, S., Morita, N., Sakurai, E., Tanaka, T., Takeda, H., Kuriyagawa, T., and Shoji, K., "Study on precision Grinding of Micro Aspherical Surface," Journal of the Japan society for precision engineering, Vol. 64, No. 4, pp. 619~623, 1998.
Kim, J. K., Choi, Y. S., Ahn, J. H., Son, B. R. and Hwang, Y. K., "Compression Molding of Diffractive-Aspheric Lense Using Chalcogenide Glasses," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 19, No. 6, pp. 43-48, 2020.
Kim, H. J., Cha, D. H., Lee, J. G., Kim, S. S. and Kim, J. H., "A Study on Pressing Conditions in the molding of Aspheric Glass Lenses for Phone Camera Module using Design of Experiments," Journal of the Korean institute of electronic material engineers, Vol. 20 No. 8, pp. 720-725, 2007.
Seong, M. R. and Kim, H. Y., "Experimental Study of the Aspheric-plano Lens Fabrication using Compression Glass Molding," Transactions on Electrical and Electronic Materials, Vol. 19, No. 6, pp. 237-242, 2008.
Lu, X. and Kim, L. S., "A statistical experimental study of the injection molding of optical lenses," Vol. 113, PP. 955, 2005.
Kim, H. J., Cha, D. H., Lee, J. K., Kim, S. S. and Kim, J. H., "A study on pressing conditions in the molding of aspheric glass lenses for phone camera module using design of experiments," J. of KIEEME(in Korean), Vol. 20, No. 8, P. 720, 2007.
Kamano, T. and Katsuki, M., "Compensation technology of glass molding accuracy," inMedical Imaging 2003, Dev. P. Chakraborty and E. A. Krupinski, eds., Proc. SPIE TD02, pp. 4-6, 2003.
Kim, H. O., Cha, D. H., Lee, D. G., Kim, S. S., Kim, J. H. and Jong, S. W., "Optical Properties of Aspheric Glass Lens using DLC Coated Molding Core," Korean journal of optics and photonics Vol. 18 No. 5, pp. 362-366, 2007.
Zu, Y. S. and Lin, S. T., "Optimizing the mechanical properties of injection molded W-4.9 % Ni-2.l % Fe in Debinding," Journal of Materials Processing Technology, Vol. 71, pp. 337, 1997.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.