[논문]무기체계의 안전 설계를 위한 DFMEA 적용에 관한 연구

서양우; 오영일; 김희욱; 김소정

doi:10.14248/jkosse.2022.18.1.046

무기체계의 안전 설계를 위한 DFMEA 적용에 관한 연구
A Study on the Application of DFMEA for Safety Design of Weapon System 원문보기

시스템엔지니어링학술지 = Journal of the Korean Society of Systems Engineering, v.18 no.1, 2022년, pp.46 - 57

서양우 (LIG넥스원 PGM IPS연구소) , 오영일 (LIG넥스원 PGM IPS연구소) , 김희욱 (LIG넥스원 PGM IPS연구소) , 김소정 (LIG넥스원 PGM IPS연구소)

Abstract ▼ AI-Helper

In this paper, we proposed the DFMEA Implementation Method for safety design of Weapon System. First, we presented the process for DFMEA. And then, the case analysis of OOO missile was performed in accordance with the process presented. After defining the system requirements of OOO missile, failure definition scoring criteria was set. In order to clarify the definition of failure, the failure was classified into safety, reliability, maintainability and others. After performing the function analysis, the relationship matrix analysis was performed to identify the failure mode according to the function without omission. After clarifying the failure classification, mode of failure, cause of failure and effect were analyzed to calculate the severity, occurrence and detection values. After the action priority was judged, the recommended action according to the failure classification was identified for the determined action priority. The results of this study can be used as a relevant basis for the design reflection and resource re-allocation of stakeholders.

주제어

표/그림 (12)

표 Severity Classification[12]
표 Occurrence Evaluation Criteria[12]
그림 [Figure 1] Proposed Process of DFMEA
표 Detection Evaluation Criteria[12]
그림 [Figure 2] Function Analysis of OOO Missile
표 Requirements of OOO Missile
표 Management Plan to Failure Category
표 Relationship Matrix for OOO Missile
표 DFMEA of OOO Missile
표 Action Priority for DFMEA[15]
표 Determination of Action by Case
표 RPN Scoring of OOO Missile

참고문헌 (15)

SAE J 1739, Potential Failure Mode and Effects Analysis in Design FMEA, Society of Automotive Engineers, p. 7, 2002.
The Influence of Reliability, Maintain -ability, Quality, Supportability and Interoperability on System Affordability, Reliability Information Analysis Center, pp. 39-40, 2013.
ISO/IEC/IEEE 15288, System and Soft -ware Engineering - System Life Cycle Processes, ISO/IEC/IEEE, p. 61, 2015.
Ahn, D. G., Yoo, J. M., and Jang, J. S., How to Perform FMEA Effectively for Weapon System Development Stage, Journal of Applied Reliability, Vol. 21, No. 1, pp. 45-60, 2021.

상세보기
Kim, J. C., and Jung, H. J., A Study on Application of DFMEA for Quality Improvement of Weapon System, The Korean Operations Research and Management Science Society Conference, pp. 5640-5659, 2016.
Park, K. D., Jung, J. W., Cha, J. H., and Jung, J., A Study on Design Reflection in the Early Stage of Weapon System Development using Functional FMEA, Journal of Applied Reliability Conference, pp. 223-231, 2016.
Kim, T. H., Jang, J. S., and Lee, E. Y., Practical Criteria for Process FMEA, Journal of Applied Reliability, Vol. 10, No. 2, pp. 123-135, 2010.
Lee, C. H., Yang, K. W., and Kim, S. B., Reestablishment of RPN Evaluation Method in FMEA Procedure for K21, Journal of the Korean Society for Quality Management, Vol. 40, No. 3, pp. 306-315, 2012.

원문보기 상세보기
Lee, C. H., Yang, K. W., Park, D. I., Lee, I. L., Kwon, J. S., Choi, I. H., and Kim, S. B., A Study on the Risk Identification Methods for Initial and Mass Production Stage of Military Products using FMEA, Journal of the Korean society for Quality Management, Vol. 42, No. 3, pp. 311-323, 2014.

원문보기 상세보기
Shin, S. E., Lee, J. H., Park, D. K., and Jung, J. Y., Development of a Safety Assessment System on Aging Management in Exiting CANDU Steam Generators, Journal of the Korean Society for Systems Engineering, Vol. 10, No. 1, pp. 49-56, 2014.
Kim, H. M., Yoon, S. J., Hong, D. G., and Suh, S. H., Design for Smart Management System; from Worker and Mobile Equipment Perspectives, Journal of the Korean Society for Systems Engineering, Vol. 11, No. 2, pp. 41-49, 2015.
Weapons System RAM Law & Guide Book, Defense Acquisition Program Administration, pp. 46-48, 2018.
DA Pamphlet 73-1, Test and Evaluation in Support of Systems Acquisition, Headquarters Department of the Army, p. 82, 2003.
TRADOC Pamphlet 71-9, Force Development Requirements Determination Department of the Army Head -quarters, U. S. Army Training and Doctrine Command, pp. 332-335, 1999.
AIAG-VDA Failure Mode and Effects Analysis Handbook, 1st Edition, Automotive Industry Action Group & the Verband der Automobilindustrie, p. 64, 2017.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증