[논문]BIM기반 에너지절약계획서 건축부문 부분자동화 작성 시스템 제안 - BIM 소프트웨어와 EXCEL VBA를 이용한 자동화과정을 중심으로 -

류재호; 황종민; 김솔이; 서화영; 이지현

doi:10.13161/kibim.2022.12.2.049

BIM기반 에너지절약계획서 건축부문 부분자동화 작성 시스템 제안 - BIM 소프트웨어와 EXCEL VBA를 이용한 자동화과정을 중심으로 -
A Proposal for Partial Automation Preparation System of BIM-based Energy Conservation Plan - Case Study on Automation Process Using BIM Software and Excel VBA - 원문보기

Journal of KIBIM = 한국BIM학회논문집, v.12 no.2, 2022년, pp.49 - 59

류재호 (서울과학기술대학교 건축학부) , 황종민 (서울과학기술대학교 건축학부 건축공학전공) , 김솔이 (서울과학기술대학교 건축학부 건축공학전공) , 서화영 (서울과학기술대학교 건축학부 건축공학전공) , 이지현 (서울과학기술대학교 건축학부 건축공학전공)

Abstract ▼ AI-Helper

The main idea of this study is to propose a BIM-based automation system drawing up a report of energy conservation plan in the architecture division. In order to obtain a building permit, an energy conservation plan must be prepared for buildings with a total floor area of 500m2 or more under the current law. Currently, it is adopted as a general method to complete a report by obtaining data and drawings necessary for an energy conservation plan through manual work and input them directly into the verification system. This method takes a lot of effort and time in the design phase which ultimately increases the initial cost of the business, including the services of companies specialized in the environmental field. However, in preparation for mandatory BIM work process in the future, it is necessary to introduce BIM-based automatic creation system that has an advantage for shortening the whole process to enable rapid permission of energy-saving designs for buildings. There may be many methods of automation, but this study introduces how to build an application using Dynamo of Revit, in terms of utilizing BIM, and write an energy conservation plan by automatic completion of report through Dynamo and Excel's VBA algorithm, which can save time and cost in preparing the report of energy conservation plan compared with the manual process. Also we have insisted that the digital transformation of architectural process is a necessary for an efficient use of our automation system in the current energy conservation plan workflow.

주제어

표/그림 (17)

그림 Figure 1. Proposed workflow of energy conservation plan using BIM
그림 Figure 2. Example of Point.ByCoordinates node in Dynamo - ① Node ② Port
그림 Figure 3. Dynamo Workflow(Step 1): Exporting Data
표 Table 1. Components of Point.ByCoordinates node
그림 Figure 4. Required Drawings - ① Plan View for Insulation Plan ② Plan View ③ Section view of wall ④ Section View of floor ⑤ Section view of roof
그림 Figure 5. Dynamo Workflow(Step 2): Generating Required Drawings
그림 Figure 6. Process of Creating Section Legend Component
그림 Figure 7. Complete Section Legend Component - ① Setting View Range ② Tag to each material name
그림 Figure 8. Dynamo Workflow(Step 3): Exporting and Saving Image
그림 Figure 9. Dynamo player pop-up window of each workflow
그림 Figure 10. Selection UI for insulation type
그림 Figure 11. Saved image of wall section legend component
그림 Figure 12. User form for condition input
표 Figure 13. Energy Performance Index(EPI) in architecture division
그림 Figure 14. Mandatory categories
그림 Figure 16. Pop-up collection lists of evidences for each category - ① Evidences of mandatory categories ② Evidences of EPI
표 Figure 15. Calculation of Energy Performance Index(EPI)

참고문헌 (27)

Autodesk Revit Knowledge Web site, https://knowledge.autodesk.com/ko/support/Revit/learn/caas/qsarticles/keyRevit-concepts.html
Chin, S. Y. (2020). Storytelling Building Information Modeling, CIRCOM
Cho, G. H., Kim, J. Y., Kim, K. A., Seo, J. C., Lee, A. Y., Jeong, Y. K. (2018). Development of BIM Based EPI Evaluation Automation, Symposium of Architectural Institute of Korea, 38(1), p. 744
Choi, C. H. (2017). Development of BIM based Platform for Evaluation of Energy Saving Design Criteria, Final Report of Ministry of Science and ICT
Choi, C. H., Kwon, D. Y., Cho, S. H., Kim, J. H. (2020). An Automated Process to Produce Shop Drawings for MEP Works in BIM Environment, Journal of KIBIM, 10(4), pp. 22-31.
GABC. (2021). 2021 GLOBAL STATUS REPORT FOR BUILDINGS AND CONSTRUCTION
Imagine Builder Web Site. https://www.imbu.co.kr/imbuproducts/#tab-id-5-active
Jung, Y. S. (2020). Development of National-Level Bottom-up Greenhouse Gas Emission Projection and Potential Reduction Analysis Technology for the Building Sector in Response to the New Climate System, Final Report of Urban & Architecture Research Project of Korea Agency for Infrastructure Technology Advancement
Jeong, Y. S., Cho, S. H. (2020). Post-2020 Greenhouse Gas Emission Projection in Building Sector, Journal of AIK, 36(10), pp. 117-125.
Kim, J. M. (2016). Analysis on Issues in Energy Saving Standard for Buildings and Improvement Measures, Master Thesis, Chung-Ang University
Kim, J. Y., Kim, J. H, Cho, Y. Y., Kim, Y .I., Jeong, G. S. (2016). A Study on the Correlation of Building Energy Efficiency Rating with Energy Performance Index in Non-Residential Buildings, Symposium of SAREK, pp. 90-93.
Kim, T. H. (2018). South Korea's building sector GHG Emission Status Analysis, Korean Environmental Industry & Technology Institute
Kim, Y. B. (2021). Greenhouse gas reduction target for 2050 and carbon-neutral policy measures in the building sector, Korea Research Institute for Human Settlements, 2021.09, pp. 12-19.
Kim, Y. J, Kim, I. C., Chin, S. Y. (2020). Developing a Drawing Template for BIM software to Improve BIM based Drawing Work Efficiency in the Construction Document Phase, Journal of KIBIM, 10(4), pp. 98-109.
Korean Energy Agency. (2017). Explanatory note on energy-saving design standards for buildings
Korean Energy Agency. (2019). Energy Conservation Plan FAQ If you know this, you will do as much as Manager Kim of the review organization!
Korean Energy Agency. Building Energy Conservation Plan Work Process, https://www.energy.or.kr/web/kem_home_new/ener_efficiency/building_03.asp
Korean Law Information Center. https://www.law.go.kr/
Lee, D. H. (2015). Automatic check of energy conservation plan using open BIM, Master Thesis, Sungkyunkwan University
Lee, G. W. (2014). Analysis and Development Measures in Application of Architectural Items to the Energy Saving Planning, Master Thesis, Daejin University
Lee, Y. G. (2015). EnergyInfo, Development of BIM-based real-time type performance automatic calculation technology for Energy Conservation Plan, Industry-University-Research Cooperation Technology Development Project
Moon, H. J. (2011). Development of BIM based Simulation Technology and Design Supporting system for High Building Energy Performance, Final Report of Ministry of Science and ICT
National Greenhouse Gas Emission Statistics. https://www.gihoo.or.kr/portal/kr/biz/inventory.do
Office VBA Reference. https://docs.microsoft.com/ko-kr/office/vba/api/overview/
Solideo Systems Consortium. Energy Conservation Plan Online Review System Manual
The 2050 Carbon Neutrality and Green Growth Commission. https://www.2050cnc.go.kr/
The Dynamo Primer manual web site. https://primer.dynamobim.org/

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format