최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국추진공학회지 = Journal of the Korean Society of Propulsion Engineers, v.26 no.2, 2022년, pp.20 - 27
이경환 (Department of Mechanical Engineering, Hanbat National University) , 박성현 (Department of Mechanical Engineering, Hanbat National University) , 강홍재 (Plasma Engineering Laboratory, Korea Institute of Machinery and Materials) , 이종광 (Department of Mechanical Engineering, Hanbat National University)
Hypergolic propellant ignited spontaneously when fuel and oxidizer contact without ignition system. Due to this characteristic, the risk of accidents is high when new propellants are evaluated. Prevention of accidents is very important because the damage can be large when the accident occur. In this...
Kang, H.J. and Kown, S.J., "Foundational Study and Performance Evaluation of Non-Toxic Hypergolic Propellants," The Korean Society for Aeronautical & Space Sciences, Jeju, Korea, pp. 268-271, 2013.
Lee, K.H., Park, S.H., Kang, H.J. and Lee, J.K., "Pre-Evaluation Method of Hypergolic Propellants Using Micro Reactors," 56th KSPE Spring Conference, Jeju, Korea, pp. 77-80, May 2021.
Mahakali, R., Kuipers, F.M., Yan, A.H., Anderson, W.E. and Pourpoint, T.L., "Development of Reduced Toxicity Hypergolic Propellants," 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, San Diego, C.A., U.S.A., AIAA 2011-5631, July 2011.
Pourpoint, T.L. and Anderson, W.E., "Hypergolic Reaction Mechanisms of Catalytically Promoted Fuels with Rocket Grade Hydrogen Peroxide," Journal of the Combustion Science and Technology, Vol. 179, No. 10, pp. 2107-2133, 2007.
Pulkit, S., "Study of Condensed Phase Reactions Between Hypergolic Propellants Using Microreactors," Ph.D. Dissertation, Department of Mechanical Engineering, The Pennsylvania State University, University Park, P.S., U.S.A., 2014.
Lee, J.K. and Kwon, S.J., "Mixing efficiency of a multilamination micromixer with consecutive recirculation zones," Chemical Engineering Science, Vol. 64, No. 6, pp. 1223-1231, 2009.
Cho, S.J., "Micromachining technology using photosensitive glass," Journal of the Korean Society of Laser Processing, Vol. 14, No. 1, pp. 25-29, 2011.
Dietrich, T.R., Ehrfeld, W., Lacher, M., Kramer, M. and Speit, B., "Fabrication Technologies for Microsystems Utilizing Photosensitive Glass," Journal of the Microelectronic Engineering, Vol. 30, Issues. 1-4, pp. 497-504, 1996.
Park, S.H., Kang, H.J., Lee, K.H., Park, Y.C. and Lee, J.K., "Experimental Method for the Drop Test of Hypergolic Propellants," Trans. Korean Soc. Mech. Eng. B, Vol. 45, No. 7, pp. 357-364, 2021.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.